Vita 3D Master Color Guide.

Packaging:

• 1 piece

Flexible silicone polishing erasers.

Intended for processing:

• Porcelain.
• Precious alloys.
• Acrylic.

Characteristics:

• White, coarse-grained eraser.
• For pre-treatment.
• Speed: 7,000 - 10,000 rpm.
• Size 22x3 mm.

Packaging:

• 1 pc or 100 pcs

Cold polymerization acrylic material for temporary relining of acrylic dentures.

• Villacryl SOFT in the new formula does not contain dangerous phthalates, it has been tested by certified institutes and medical authorities. The stability of parameters and functional properties are guaranteed for 30 days of use in the patient's mouth.

Advantages:

• Easy to prepare and process.
• Good adhesion to acrylic dentures.
• Well-balanced softness.
• Color T4 - pink.

Technical data:

• Mixing ratio: 1.5 g powder / 1.0 g liquid.
• Gel time: (at 23 ± 2°C) 2-3 min.
• Polymerization; Pressure method 30 min. 65°C pressure 2 bar.
• Cooling: Remove the model from the polymerizer and cool to room temperature.

Packaging:

• Powder 60g + liquid 40ml + varnish 10ml.

Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700 °C. As the outer layer wears away, more sharp diamond particles emerge.

Characteristics:

• Diamond Micro 15,000 - 30,000 rpm.
• Application - chrome - cobalt, palladium, porcelain.

Packaging:

1 piece.

SU UNDERLAY WAX cervical wax, orange.

Characteristics:

• Perfect for shaping the cervical edges of crowns and partial crowns.
• Soft casting wax almost completely free of shrinkage.
• Solidifying temperature 66 °C.

Packaging:

• 1pc/45g

Renfert silicone erasers are recommended for pre-processing of porcelain and metal. Highly abrasive, they do not leave streaks or "orange film" on the treated surface.

Renfert catalog number 860000

Advantages:

• They grind hard - grinding the surface, shaping.
• No streaks on the ceramic surface.
• They are perfect for processing places where the alloy is adjacent to porcelain.

Technical data:

• Ø 22mm.
• Thickness 3.2 mm.
• Maximum speed 15000 rpm

Packaging:

• 1 piece.

Bi-Pin and Bi-V-Pin drill for micromotor.

Renfert catalog number 3470000

Description:

• Suitable drilling depth of 6.5 mm thanks to the use of a stop on the drill.
• Drill shank diameter 2.35 mm (for the micromotor).

Packaging:

• 1 piece.

Picosilk preparation for wetting wax models before embedding them in the investment material. Pikosilk is an indispensable preparation in foundry technology because it allows for accurate casting without unnecessary micro-pours.

Renfert catalog number 15500000

Characteristics:

• Expansion of the surface of the wax model: crowns, bridges, skeletal dentures.
• Improving the flowability of the investment material at the wax surface in order to make a more accurate casting and easier release from the investment material.

How to use:

• The wax model prepared for embedding in the casing should be sprayed with Picosilk from a distance of approximately 15 cm.
• Make sure the surface of the model is quite damp and allow it to dry for a while.
• Then place the model in the casting ring and pour the investment compound over it.

Packaging:

• 75 ml spray.

Liquid for curing Prohard models.

• Liquid intended for hardening and hardening duplicated models from investment masses.
• The preparation holds wax well, does not react with preparations reducing surface tension.
• It shows good adhesion - The preparation is well absorbed into the duplicated model, giving an optimal hardened smooth surface for further development.

Usage:

• Dry the duplicated model at 120-150°C, and then cool down to 45°C.
• Then dip twice for 10 sec. Prohard liquid and leave to cool completely.

Packaging:

• 900 ml.

Separate liquid for acrylic-gypsum and plaster-gypsum insulation. Preparation for technical and dental work. It is intended for isolating the surface of plaster molds from acrylic dough for dentures, crown veneers, crowns and other prosthetic works. Creates an insulating membrane of appropriate thickness.

Characteristics:

• Pink separator has universal use.
• Blue separator, slowly drying, absorbed by plaster, recommended for pressure techniques, holds well and does not peel off.

Packaging:

• 1000 ml.

The product prevents the wax from sticking to the plaster model. It is an insulation for wax during all work on plaster models.

Usage:

• After wetting the model, use an atomizer to spray the surface on which the wax elements will be made.

Advantages:

• Makes wax models very easy to remove.
• In addition, it cleans and maintains plastic surfaces.
• Prevents freezing and defrosts locks.

Packaging:

• 100ml.

High-quality ceramic crucibles manufactured in France.

Crucibles dedicated to the most popular induction foundries and centrifuges.

Packaging:

• 1 piece.

Made of plastic with a slide-in tube for insertion into the duplicating material.

Packaging:

• 1 piece

Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.

Characteristics:

• 1mm wire.
• Length 10m.
• Resilient - hard.
• The highest quality of stainless steel.
• Tensile strength (N/mm2) 1800 - 2000.

Packaging:

• 1Roll/10m

Preparation in the form of a paste, applied directly to the sandblasted and cleaned metal structure.

Advantages:

• A strong and safe combination of metal and ceramics.
• It reduces oxidation.
• There are no chips and cracks associated with thermal expansion of the metal (WAK).
• After firing, it changes color to ivory, thus reducing the consumption of the opaquer.

Packaging:

• 1pc/6g

Erkoflex foil 1.5mm.

For making splints for whitening, fluoridation, bite splints, transfer splints for brackets, positioners.

Characteristics:

• Soft.
• Square, diameter 125mm.
• Made of ethylene vinyl acetate (EVA).

Packaging:

• 10 pcs.

Fine CrNi steel reinforcing mesh.

• Mesh size 10x10cm.

Packaging :

• 1 piece.

Concave-convex prosthetic forceps.

• Pliers length 125 mm.
• For wire thickness max. 0.8mm
• The diameter of the working tip is 1.2 mm

Packaging:

• 1 piece

Replaceable serrated blade for porcelain.

Renfert catalog number 10500600

Packaging:

• 1 piece.

Working chamber specially designed for machining materials that require a water jacket, such as zirconium.

Advantages:

• Waterproof LED lighting guarantees excellent visibility.
• Stainless steel housing with a wide field of view.

• handpiece adapter.

• Optionally, it can be purchased with a pedal activating the drainage of accumulated water.

Technical data:

• Power: 26W
• Dimensions: 260/460/370+50mm
• Weight: 8 kg

Packaging:

• 1 piece

Palette for porcelain and paints. Newly developed teardrop hole shape: sharp at the back for wiping the brush, tapered at the front to allow controlled dispensing of porcelain onto the brush surface.

Renfert catalog number 10470000

Characteristics:

• Palette for mixing porcelain and paints.
• 13 teardrop-shaped holes.
• 4 round holes.
• 2 holes for liquids.

Plate dimensions:

• 159x11x90mm

Housing dimensions:

• 211x28x147mm

Packaging:

• Palette.
• Marking pen.
• Label foil.

For making miniplastic bite splints, anti-grinding splints and dressing plates, cast moldings, drilling, planning and X-ray templates.

Characteristics:

• Round ⌀ 120 mm.
• Thickness 0.6mm.
• Hard.
• Burns without residue.
• Does not require preliminary drying.
• Transparent.
• Made of polyethylene terephthalate glycol (PETG).

Packaging:

• 20 pcs

For making miniplastic bite splints, anti-grinding splints and dressing plates, cast moldings, drilling, planning and X-ray templates.

Characteristics:

• Round 120 mm.
• Thickness 1.0mm.
• Hard.
• Burns without residue.
• Does not require preliminary drying.
• Transparent.
• Made of polyethylene terephthalate glycol (PETG).

Packaging:

• 20 pcs.

Chamois chamois polishing brush.

• Soft with a diameter of 60x5.5mm.

Packaging:

• 1 piece.

Universal prosthetic clamps. so-called Sharks. Made of stainless steel.

Characteristics:

• Total tool length 150mm.
• For wire max. 1.0mm

Packaging:

• 1 piece.

Polishing brush.

• 4 layers, wide.
• Universal.
• Diameter 80mm x 20mm.

Packaging:

• 1 piece.

Goat bristle brush for polishing.

Characteristics:

• Diameter 21mm.
• Soft goat hair.
• On a holder.

Packaging:

• 1 piece. or 12 pcs.

Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700°C. As the outer layer wears away, more sharp diamond particles emerge.

Characteristics:

• Diamond Tubo - 15,000 - 30,000 rpm.
• Application - chrome-cobalt, palladium.

Packaging:

• 1 piece.

Erkoform 3D + is a device for vacuum deep forming.

Characteristics:

• Temperature measurement sensor.
• Touch panel with menu in Polish.
• Does not require connection to a compressor.
• A vacuum is immediately created before pressing.
• No preheating required.
• Vertical foil pressing guarantees uniform thickness of the work performed.
• Easy access to the model during heating.
• Lots of space for tall models.
• Telescopic and tiltable foil application.
• Practical, one-handed attachment of foil up to 5 mm thick.

Technical data:

• Dimensions - 37.0 x 35.0 x 31.5 cm.
• Power supply - 230 V/50 Hz; 340 W
• Max. vacuum 0.8 bar.
• Volume < 70 dB(A).
• Weight 11.9 kg.
• 12-month warranty

Packaging:

• Erkoform-3d+, foil trial package, foil securing ring, granulate collection device, model plate, granulate container, granulate filling brush with rubber pad, on-off magnet, power cable, white work tray, filling granules, machine documentation ( folder )

Universal polishing paste.

• Designed to give a final gloss to pre-smoothed surfaces.
• It can be used for polishing details made of acrylic resins and metals.
• Characterized by good adhesion to the polished surface, it does not run down during processing.

Packaging:

• 150g

Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700 °C. As the outer layer wears away, more sharp diamond particles emerge.

Characteristics:

• Macro Diamond - 15,000 - 30,000 rpm.
• Application - chrome-cobalt, palladium, porcelain.

Packaging:

• 1 piece.

Cuvette with lid for zirconium sintering.

Technical data:

• Diameter 10 cm
• Height 3.5 cm
• Lid height 0.5 cm

Packaging:

• 1 piece

Can for duplicating models in silicone (small).

• Precise reproduction.
• Material savings.
• Dimensional stability.
• Three interchangeable palatal molds that fundamentally support reproduction accuracy and enable extremely economical use of silicone due to flexible positioning.

Packaging:

• 1 piece.

Polishing brush.

• 4 layer
• convergent.
• Hard.
• Diameter 80mm.

Packaging:

• 1 piece.

Bijou 90 tabletop laboratory burner.

Renfert catalog number 9600000

Characteristics:

• Proven quality and safety thanks to the DIN-DVGW type examination certificate in accordance with DIN 30665-1.
• The necessary flame intensity can be selected steplessly between the main flame and the economy flame.
• The oxygen supply is regulated by setting rings on the chimney.
• Each burner, apart from the vertical position, can be tilted in any direction by 30 degrees.
• This prevents dripping wax from clogging the nozzle. You can easily disconnect the burner from the non-tipping base.
• Propane-butane gas burner.
• 3 years warranty.

Technical data:

• Temperature range (max. ambient temperature) 40°C
• Weight 530 g
• Dimensions (W x H x D) 100 x 109 x 60 mm
• Diameter (nozzle) 0.34 mm
• Connection pressure 50 mbar
• Height (depending on the angle) 102 - 109 mm
• Connection hose (standard) DIN 30664
• Consumption 48 g/h
• Gas type Liquid gas

Packaging:

• 1 piece.

Double-sided articulation paper. Shape and straight.

Characteristics:

• Blue - red 80um.
• Universal.
• No tweezers required.

Packaging :

• 144 sheets/1pack

String bags.

• Dimensions 7x10cm.
• Perfect for transporting impressions and finished prosthetic works.

Packaging:

• 100pcs

For making miniplastic bite splints, anti-grinding splints and dressing plates, cast moldings, drilling, planning and X-ray templates.

Characteristics:

• Round ⌀ 120 mm.
• Thickness 0.8mm.
• Hard.
• Burns without residue.
• Does not require preliminary drying.
• Transparent.
• Made of polyethylene terephthalate glycol (PETG)

Packaging:

• 20 pcs

Reliable water softening and filtering system, specially adapted to the POWER 2 steamer. The system provides optimal protection for the POWER steamer, increasing its efficiency, reliability and durability.

Renfert catalog number 18460100

Advantages:

• Affordable and advanced water softening/filtering technology that is usually only available in large and expensive systems.
• It supplies the POWER 2 evaporator with clean, calcium-reduced water.
• Easy, compact installation (free-standing or wall-mounted) that can be completed in minutes.
• Simple operation and monitoring (visual and acoustic signal) using a flow sensor with an OLED display.
• Quick replacement of filter cartridges in seconds - remove, insert, that's it.
• Durable filter cartridges.
• Venting and rinsing directly at the filter head, without disconnecting the pipes (using automatic inlet and outlet shut-off valves).
• Automatic replacement of all gaskets between head and cartridge with each cartridge change.

Packaging:

• POWER Steamer water softener, filter head with rinsing hose, rinsing hose, connection hose, 2 adapters 3/4" - 3/8", gaskets, M filter insert for POWER steamer softener, flow meter for POWER steamer softener, user manual/ Quick Start Guide, test strips for determining water hardness

Mold for model bases.

Characteristics:

• Made of flexible PVC material.
• Different sizes top and bottom.

Sizes:

• Top L 10×7.7 cm.
• Top M 8.7×6.8 cm.
• Top S 7.5×5.7 cm.
• Bottom M 8.7×6.5 cm.
• Bottom S 8×5.7 cm.

Packaging:

• Set of 5 pcs.

Mold for model bases.

Characteristics:

• Made of flexible PVC material.
• Different sizes top and bottom.

Sizes:

• Top L 10×7.7 cm.
• Top M 8.7×6.8 cm.
• Top S 7.5×5.7 cm.
• Bottom M 8.7×6.5 cm.
• Bottom S 8×5.7 cm.

Packaging:

• Set of 5 pcs.

Sand for a prosthetic sandblaster. Gradation 350 microns.

Composition:

• Al2O3 content: over 99%.
• Admixtures: Na20, K20, CaO, SiO2 and Fe2O.
• Specific density: 3.95 +/- 0.5 g/cm3.
• Bulk density: 1.52- 1.85 g/cm3.
• Hardness: over 9 on the Mohs scale.
• Grain shape: sharp-edged.

Packaging:

• 5kg

BurnOutPost plastic cones for taking impressions for crown-root inlays. They burn without residue.

Packaging:

60 pcs.

IPS d.SIGN Dentin, a specially developed ceramic glass which, thanks to the content of fluorapatite, gives prosthetic restorations a natural look. Fluoroapatite also improves optical properties.

Characteristics:

• High color stability.
• Natural fluorescence.
• It comes in 16 colors A-D.

Packaging:

• 20g.

Polishing silicone eraser. Intended for the preparation and processing of acrylic dentures.

Characteristics:

• Green erasers: rough machining, coarse-grained.
• Gray erasers: polishing, medium grain.
• Yellow erasers: final polishing, fine-grained.

Packaging:

• 1 piece.

Pencil erasers, EVEFLEX pins.

Characteristics:

• The diameter of the eraser is 2x22mm.
• Speed 7,000- 15,000 rpm. max 25,000 rpm.
• Mounted on a special holder (handle mikran code 1527).

Brown color :

• coarse, very hard

Blue color:

• coarse hard

Grey colour:

• medium grain, soft

Red colour:

• fine-grained soft

Green color:

• very fine-grained, soft.

Packaging:

• 1 piece.

Erkoflex foil 4.0mm.

For making positioners, for duplicating training models, splints for athletes.

Characteristics:

• Soft.
• Round, diameter 120mm.
• Made of ethylene vinyl acetate (EVA).

Packaging:

• 50 pcs.

Round wax profiles 1.5 mm.

Packaging:

• 50g/pack

Adhesive wax.

• Good bonding effect on all materials.
• Ideal for attaching retention or carrier elements, repair and soldering work.
• Melting point 71 °C.
• Red colour.

Packaging:

• 1 piece

Cervical wax, eggplant color.

Characteristics:

• Flexible, stress-free, soft and non-shrinking special wax for modeling the cervical edges of crowns, precision parts and inlays.
• Cervical wax burns without leaving any residue, making it also suitable for the ceramic pressing technique.
• It has a very low elastic limit, so any deformation has only a plastic effect. This allows for safe modeling of thin plates up to the preparation border.
• Freezing point approx. 62°C.

Packaging:

• 70g