Stand for Twister vacuum mixer

This stand is designed to fit all types of Twister mixers.

Renfert catalog number 18210102

Advantages:

• Safe installation of the device in just a few moves.
• Flexibility and ergonomics.

Packaging:

• 1 pc/ tripod only without device

Protective mesh for the glass for the Vario Basic sandblaster

Protective mesh for the glass for the Vario Basic sandblaster.

Renfert catalog number 29600003

Packaging:

• 1 piece

Zeiser Pinarka P10 + starter set for 100 models

A precise system for making plaster models with a plastic base that eliminates the expansion of plaster and facilitates and shortens work time.

Pinnacle P10:

• Dimensions: 250 x 185 x 350 mm
• Weight: 10 kg
• Voltage: 230 (100/115) V / 0.30 W
• Revolutions: 2,800 min
• Laser category: II < 1mW

Set contains:

Zeiser part number, description:

176010 Zeiser drill bit 107033 Insert carrier - 3 pieces 321070 Stanley knife 359010 Hammer 576050 Zeiser pins 14mm 1.000 pieces 576050.1 Zeiser pins 12mm short 1.000 pieces 576080 Zeiser silicone Combisil putty 1kg 576830 Zeiser base plates new small 100 pieces 576881 Alignment plates clear large and small 2 pieces 576802 Insulating foil 100 Stück

Packaging:

Pin machine P10 1 pc. + Starter set 1 pc.

Stationary widia nozzle for the Effegi Brega sandblaster

Stationary sandblaster nozzle.

Nozzle Size:

• 2.5 mm
• 3.5 mm

Package:

• 1 piece

Cyclope - induction heater for knives and modelers

Induction heater for knives and modelers.

Advantages:

• Minimizes the risk of burns.
• Saves time.
• Improves the quality of work.

Packaging:

• 1 piece

Power Light curing lamp

Technical data:

• bulbs type UVA + white light + halogen
• emits a temperature of 40 degrees C.
• wavelength 320- 550 nm

It polymerizes most of the composites available on the market, equipped with a rotating table and a temperature stabilization system in the polymerization chamber.

Package:

1 piece.

OMEC WIZARD 60J laser welding machine

The OMEC Wizard laser welding machine is the perfect solution for professionals working in dental technology laboratories. This advanced device combines extraordinary operating power, low power consumption and extended lamp life. Despite its compact size, the welder is equipped with a powerful water and air cooling system, ensuring optimal performance during each operation.

Key features that distinguish the Wizard laser welding machine:

1. Intuitive user interface: Navigate easily with the 7-inch touchscreen and joystick that allow you to easily select and adjust welding parameters. This user-friendly interface allows fine adjustments that give you confidence in precision welding.
2. Spacious and Accessible Compartment: The Wizard has a wide compartment that provides easy access to your work. The large front door makes it easy to load and unload, and the chamber is illuminated by energy-saving cold LED lights, providing excellent visibility for any welding job.
3. Advanced Optical System: Equipped with a Leica 10x 45° stereo microscope, the Wizard offers unparalleled magnification and viewing angles. This high-quality optical system enables precise examination and work on fine details, ensuring perfect results every time you weld.
4. Real-time monitoring: The built-in webcam, located along the axis of view of the device, provides real-time visual information on a dedicated screen. This extremely useful feature enables the tracking and control of objects being welded, ensuring precise execution and minimizing the margin for error.

Experience the transformational power of the Wizard laser welder and take your laboratory capabilities to a new level. Its compact yet powerful design, combined with intuitive controls and advanced optics, guarantees excellent welding performance in a variety of applications. Whether you're working with dental prosthetics, intricate pieces of jewelry or delicate eyeglass parts, Wizard is your trusted partner for exceptional results.

Note: The Wizard laser welding machine is backed by our commitment to reliability, durability and innovation. Invest in this modern device and discover a new level of precision in laboratory work.

OMEC WIZARD.60.3D Laser Welding Machine

Saw for OMEC models

A device for precise cutting of plaster models. Equipped with a built-in suction extraction of dust generated during operation.

Technical data:

• 125W power,
• 6000 rpm,
• disc thickness 0.2mm

Option to purchase a version with a laser pointer (kod_mikran10238)

Package:

1 piece

Saw for OMEC models with a laser pointer

Characteristic:

A device for precise cutting of plaster models. Equipped with a built-in suction extraction of dust generated during operation. Equipped with a precise laser pointer.

Technical data:

• power 125W,
• 6000 rpm,
• disc thickness 0.2mm
• laser pointer

Package:

1 piece

OMEC laser pinning machine

STING pincher

Technical data:

• Power100 W,
• 2,800 rpm
• Dimensions 20x21x36 h cm. 5-year warranty.

Package:

1 piece

Lamp for polymerization of OMEC composites

Thanks to the use of modern LED technology, it is perfectly suited for the polymerization of most composites available on the market. The device has a rotating table inside the chamber.

The device uses 3 different types of light sources, two types of LED diodes and one halogen bulb which additionally emits a temperature of 45 ° C. The temperature inside the device is stabilized by a fan. It has a rotating table with a mirror surface that makes it easier for light waves to reach even the largest arcades.

Technical data:

• Voltage: 230V / 50 Hz
• Power: 150 W
• Table dimensions: 15x16x10h cm
• Weight: 8 Kg
• Dimensions: 30x35x35h cm

Package:

1 piece.

Aktive Carbon - activated carbon

For regular cleaning of the porcelain furnace by absorbing oxides that precipitate during the firing process.

Renfert catalog number 20650000

Advantages:

• Optimal for firing alloys containing no base metals and alloys for firing precious metals as well as for furnace brazing.
• Prevention of pollution and deposits.
• Does not affect the quality of ceramics.

Packaging:

• 10 pcs. incl. 2 metal retaining pins.

Waxlectric II handle with yellow cable

Waxlectric II knife handle with cable, yellow.

Renfert catalog number 21540001

Packaging:

• 1 piece.

Oil-free compressor JWA 30 - Shipped on a pallet

Attention:

• The compressor is shipped only on a pallet.

The Magnum JWA-30 compressor is an oil-free compressed air compressor. It is equipped with an aluminum air tank, the design ensures quiet operation.

It is a source of air of increased quality - clean and oil-free. This allows the compressor to be used for applications requiring high-quality clean air, e.g. in a dental office and prosthetic laboratory.

Technical data:

• Tank capacity 30l.
• Capacity 150 l/min.
• Supply voltage 230V.
• Pressure 8 bar.
• Power 800W.
• Volume 55dB.
• Dimensions: length 80cm x width 30cm x height 60cm.
• weight 24 kg.

Packaging:

• 1 piece

IP Division Sandblaster Sandy 2

Sandy 2 A solid 2-tank prosthetic sandblaster for universal use.

Advantages:

• Solid, compact design.
• 700 ml tanks.
• Regulating pressure 1- 7 bar.
• Compatible with sand 50 microns - 250 microns.
• Dimensions 400x430x380mm.
• Weight 13 kg.
• 2 years warranty.

Packaging:

• 1 piece.

Dreve Lamp Eye Volution MAX

A new lamp for the polymerization of light-cured composites. Thanks to the DWL (double wavelength light) technology, it perfectly copes with both small works and large bridges on a metal foundation.

ATTENTION:

The lamp will cure 100% of any technical composite!

Wavelength 385-465nm + 465-47nm, and a reverse table (180 degree rotation technology) make this compact device unmatched among other lamps for composite polymerization available on the market. The use of LED technology allows for many years of trouble-free use of the lamp, even in an intensive cycle.

Dimensions: 205 x 205 x 255 mm Weight: 1.8 kg Socket: 100-240 V / 50-60 Hz, 0.7 A Power consumption: max. 30 W Wavelength: 385-390 + 465-470 nm Programs (cycles): 1/2/3/5/10 min

Package:

1 piece

Programat P510- G2 PROMOTION **VP5 pump for FREE**

Special offer:

• When purchasing the P510 G2 Vacuum pump VP5 furnace (Material sent directly from Ivoclar Schaan)

New Programat P510 G2 - Your intelligent specialist for high-quality firing results. Modern, intuitive, intelligent. It is designed to meet the requirements of your dental laboratory. Proven technologies such as infrared technology combined with new functions - this is what makes the new Programat ceramic furnace your reliable specialist.

Advantages:

• High process reliability thanks to infrared technology (IRT):
• The integrated thermographic camera is sensitive to infrared radiation and measures the temperature directly on the surface of fired objects.
• The oven head and heater are controlled by an infrared camera to ensure that a predefined drying temperature is constantly maintained on objects in the oven.
• Modern design.
• Dynamic color concept.
• Ergonomic shapes and forms.
• Optimized firing stand for more space and better cooling.
• High process reliability.
• Fast and high-quality firing results thanks to infrared technology.
• IoT feature for free monthly hardware usage reports.
• Ready-made programs for various materials.
• Intuitive operation
• New sealed membrane keyboard with proven color touch display.
• New user interface with new symbols and icons.
• Efficient and reliable performance thanks to software optimization.

Packaging:

• Programat P510 G2 - complete with network cable; vacuum hose; a plate for storing fired products; SiC firing table; pliers holder; a set of media for fired products 2; ATK2 automatic temperature control kit (test kit); USB cable; USB memory and WLAN kit.

SY Klamrograph

Surveyor clamp + set of analyzers.

Benefits:

• The design ensures accuracy and easy guidance of the arm.
• A stable base.
• Table for models can be set in any position.
• Possible locking of the arms and the analyzer in any position.

Package:

• 1pc + analyzers

Programat P310- G2 PROMOTION **VP3 pump FREE**

Special offer

• When purchasing the P310 G2 Vacuum pump VP3 easy furnace, it is free (Material sent directly from Ivoclar Schaan)

New Programat P310 G2 - Your intelligent specialist for high-quality firing results. Modern, intuitive, intelligent. It is designed to meet the requirements of your dental laboratory. Proven technologies combined with new functions - this is what makes the new Programat ceramic furnace your reliable specialist.

Technical data:

• Size 32.0 x 49.5 x 32.0 cm without storage plate, 39.0 x 49.5 x 32.0 cm with storage plate;
• Power supply 200-240 V, 50/60 Hz;
• Power consumption max. 8.5 A;
• Firing temperature max. 1200°C;
• Firing chamber diameter 90 mm, height 80 mm;
• USB connector;
• Weight 15.6 kg.

Advantages:

• New operating unit (membrane keyboard with color touch screen) with new symbols
• New operating software with new color concept and new symbols and icons
• IoT function - the customer is informed about service work at an early stage to prevent furnace breakdowns
• New, optimized cooling tray - larger surface for storing fired objects and optimized cooling in the marginal area
• New design and color concept - perfect integration of the furnace with the Ivoclar Vivadent device line
• Various software optimizations

Additional features:

• QTK sleeve technology
• 300 individual programs
• The OSD display (easy) allows you to easily recognize the operating status even from a distance
• USB and Ethernet Interface: The stoves can be connected to a computer/internet at any time for software updates
• Energy saving technology
• Temperature calibration using a silver test sample and a special program

Packaging:

• Programat P310 G2 - complete with network cable; vacuum hose; a plate for storing fired products; SiC firing table; holder for pliers; a set of media for fired products 2; temperature control kit 2; USB cable and USB memory stick.

Plaster sedimentation tank 26l

Settling tank 26 l It is used to precipitate gypsum or investment materials from water during the processing of models, thanks to the hermetic closed, four-chamber purification system, it prevents clogging of the sewage system and the release of unpleasant odors. Settling tank with a four-stage sequential handle. In connection with EU regulations and requirements, devices of this type must be installed in all renovated and newly built prosthetic laboratories. The settling tank has assembly and operating instructions and a full certificate of compliance required by Sanepid.

dimensions (diameter x height): 330x400mm max. dimensions with mounted hydraulic connections (horizontal x vertical): 550x480mm height of water outflow from the base: 250 mm

Packaging:

1 piece

Twister cuvette with mixer 1000 ml

Cuvette with a stirrer for the Twister device.

Renfert catalog number 182001001

Advantages:

• The well-thought-out geometry of the mixing paddle ensures proper mixing of the masses.
  • Marking the maximum filling level of the container.
  • The excess material collection zone protects the container against accidental overfilling.
  • Container made of high-strength polycarbonate.

Packaging:

• Cuvette with stirrer 1000 ml

Milo and Milo pro milling cutter with cross cuts for milling machines

Milling cutter with cross cuts for Milo and Milo pro milling machines.

Renfert catalog number 18060001

Packaging:

• 1 piece

Spindle for Omec polisher

Spindle (tip) for the polisher. Right or left.

Packaging:

• 1 piece

Grinding box processing chamber

Acrylic processing chamber with magnifying glass.

Renfert catalog number 26250000

Advantages:

• Provides optimal protection when grinding, especially small items, e.g. inserts.
• Transparent acrylic with a double magnifying glass allows you to easily view your work.
• Can be used to collect gold dust.

Dimensions:

• (width x height x depth) 250 x 150 x 150 mm.
• Weight 400 g.

Packaging:

• 1 piece

ISP-2 polymerizer

ISP-2 polymerizer

Advantages:

• 40 different polymerization programs can be set
• ease and convenience of use, the ability to control the process by reading on the display
• reliable, fully automatic operation
• made of stainless steel
• dimensions 360x240x310mm
• number of frames 3

Package:

1 piece

Basic sandblaster nozzle 50-110 µm

Sandblasting nozzle for Basic sandblasters Ø 0.80 mm. Recommended for sand from 50-110 microns, especially recommended for sand 90 microns.

Renfert catalog number 900021204

Advantages:

• Thanks to the use of very durable boron carbide, durability has been increased four times compared to traditional nozzles.
• The extended shape of the nozzle ensures very good guidance and concentration of the sand beam.
• Possibility of adapting the nozzle to each application.

Packaging:

• 1 piece

Waxlectric handle set (handle only)

Set of holders for Waxlectric Light I and II.

The product is sold without tips and a knife, only a plastic holder for the tips and handles.

Renfert catalog number 21511500

Packaging:

• 1 set

Bag for the W2000 Prod-Dent extractor

Filter bag for extractor W 2000.

Package:

• 1 piece.

IvoBase Injector 100-240V/50-60Hz

IvoBase is a system - a device and materials, and above all a specially developed technology that enables the production of a prosthesis perfectly matched to the prosthetic field. All this can be done in a short time without having to follow complicated procedures.

• Traditional methods do not provide high-quality polymerization.
• IvoBase is a fully automated injection and polymerization system for making polymethylmethacrylate (PMMA) denture plates.
• Known methods of cold and hot polymerization have many advantages, but they are also not free from disadvantages resulting from the specificity of the technological process. IvoBase managed to use the advantages of both methods.

Advantages:

• Polymerization rate.

• High process quality.

• Maximum reduction of residual monomer content.

• Perfect fit of the denture plate to the prosthetic field.

• Ease of use of the device.

Indications:

• Complete dentures.
• Partial dentures.
• Combined dentures.
• Prosthetics on implants.

Packaging:

• 1 piece

Millo and Millo pro cylindrical milling cutter with cross cuts

Cylindrical cutter with cross cuts for Millo and Millo pro milling machines.

Renfert catalog number 18060003

Packaging:

• 1 piece.

Programat EP 3010- G2 PROMOTION **VP5 pump FREE**

Special offer:

• When purchasing the EP3010 G2 Vacuum pump VP5 furnace (Material sent directly from Ivoclar Schaan)

New Programat EP 3010 G2 - Your intelligent specialist for high-quality stamping results.

Advantages:

• Infrared technology and fully automatic press function (FPF) Innovative infrared technology (IRT) with an integrated thermographic camera measures the exact temperature on the surface of the fired objects and on the ring.
• The Programat oven automatically controls the pre-drying and sealing process and adjusts the pressing process accordingly.
• Thanks to the new patented and fully automatic ironing function (FPF), ironing is now even easier and more economical.
• Just insert the ring into the stove and press the start button - the stove itself does the rest.
• Reduced risk of ceramic cracking.
• High process reliability thanks to consistently and reproducibly high-quality firing results.
• Optimum coordination of the preheating furnace with the pressing furnace.
• Automatic, fast and convenient ring size selection

Technical data:

• Dimensions: 32.0 x 46.5 x 55.0 cm without storage plate, 39.0 x 46.5 x 55.0 cm with storage plate;
• Power supply 200-240 V, 50/60 Hz;
• Power consumption max. 8.5A;
• Firing temperature max. 1200°C;
• Firing chamber diameter 90 mm, height 80 mm;
• USB connector; 18.3 kg.

Packaging:

• Programat EP 3010 G2 - complete with network cable; vacuum hose; a plate for storing fired products; SiC firing table; pliers holder; muffle cooling grid; a set of media for fired products 2; ATK2 automatic temperature control kit (test kit); USB cable; USB memory and various accessories.

Programat EP 5010- G2 PROMOTION **VP5 pump FREE**

Special offer:

• When purchasing the EP5010 G2 Vacuum pump VP5 furnace (Material sent directly from Ivoclar Schaan)

New Programat EP 5010 G2 - Your intelligent specialist for high-quality stamping results.

Advantages:

• Infrared technology and fully automatic press function (FPF) Innovative infrared technology (IRT) with an integrated thermographic camera measures the exact temperature on the surface of the fired objects and on the ring.
• The Programat oven automatically controls the pre-drying and sealing process and adjusts the pressing process accordingly.
• Thanks to the new patented and fully automatic ironing function (FPF), ironing is now even easier and more economical.
• Just insert the ring into the stove and press the start button - the stove itself does the rest.
• Reduced risk of ceramic cracking.
• High process reliability thanks to consistently and reproducibly high-quality firing results.
• Optimum coordination of the preheating furnace with the pressing furnace.
• Automatic, fast and convenient ring size selection

Technical data:

• Dimensions 32.0 x 49.5 x 55.0 cm without storage plate, 39.5 x 49.5 x 55.0 cm with storage plate;
• Power supply 200-240V, 50/60Hz;
• Power consumption max. 8.5A;
• Firing temperature max. 1200°C;
• Firing chamber diameter 90 mm, height 80 mm;
• 3 USB connectors;
• SD card reader;
• Weight 20.5 kg.

Packaging:

• Programat EP 5010 G2 - complete with network cable; vacuum hose; a plate for storing fired products; SiC firing table; pliers holder; muffle cooling grid; a set of media for fired products 2; ATK2 automatic temperature control kit (test kit); WLAN kit; USB cable; USB memory and various accessories.

Fine filter for Vortex extractor 1 piece

Fine filter for Vortex prosthetic hood.

Renfert catalog number 29245004

Packaging:

• 1 piece

Compressed air blower type "finger" - sale

Rubber blower for compressed air. Available for 10mm hose. 'Christmas tree' type connector

Packaging:

• 1 piece.

Suction hose for extractor hood 3m + 2 end connectors

3 m suction hose (plus 2 end fittings).

Renfert catalog number 900034240

Packaging:

• 1 set

Suction hose for hood 6m

Suction hose 6 m.

Renfert catalog number 901150823

• Exhaust hose diameter internal/external 38 mm / 44 mm

Packaging:

• 6m

Suction hose for extractor 9m

Suction hose 9 m

Renfert catalog number 902150823

• Exhaust hose diameter internal/external 38 mm / 44 mm

Packaging:

• 1 piece.

H+Hepa Silent TS/TS2 filter set

H+Hepa Silent TS/TS2 filter, set

Renfert catalog number 900034410

Packaging:

• 1 set

H+Hepa filter for Vortex Compact

H+Hepa Vortex compact 3L filter.

Renfert catalog number 900034420

Packaging:

• 1 piece

Vario Jet Drum sandblaster

Professional and effective drum sandblaster. It can work in both automatic and manual mode.

Renfert catalog number 29610000

Advantages:

• Precise adjustment of the most important sandblasting parameters (pressure, time, sand grain size).
• Intelligent extraction system: only useless, fine dust is removed.
• Great freedom of movement thanks to the easily removable sandblasting basket.
• 36-month warranty.

Technical data:

• Mains voltage 220-240 V, 50/60 Hz
• Working pressure 1-6 bar
• External connection pressure max. 10 bar
• Air consumption at 6 bar (87 psi) 200 l/min
• Lamp power 11 W
• Max. connected power 1200 W
• Dimensions (W x H x D) 405 x 650 x 460 mm
• The size of the sandblasting chamber is 25 l
• Weight 26 kg

Packaging:

• 1 piece

Vario Basic Right tank with 25-70 micron nozzle

Additional right tank, with a 25-70 micron sandblasting nozzle.

Renfert catalog number 29540050

Packaging:

• 1 piece

Vario Basic Left tank with 70-250 micron nozzle

Additional left tank for the Vario Basic sandblaster with a 1.2 mm sandblasting nozzle

Renfert catalog number 29540251

Packaging:

• 1 piece.

Set of wheels for Silent TS and TS2 lifts

Set of wheels for the Silent TS / TS2 lift

Renfert catalog number 29210001

Packaging:

• 1 set

Silent TS/TS2 external ventilation adapter

External ventilation adapter.

Renfert catalog number 29210004

Packaging:

• 1 piece

Silencer (silencer) for Silent lifts

Silent silencer for ski lifts.

Renfert catalog number 29560000

Advantages:

• Up to 50% reduction in perceived suction noise, with constant suction power.
• Quick and easy installation on suction hoses.
• We recommend positioning the muffler vertically to achieve full noise reduction effectiveness.

Packaging:

• 1 piece

Vortex Compact Plastic dust bag 5 pieces

Plastic dust bag.

Renfert catalog number 29245002

Packaging:

• 5 pcs

Universal suction hose adapter for extractor hood

Universal suction hose adapter.

Renfert catalog number 900034430

Packaging:

• 1 piece

Exhausting air from the Silent V4 hood

Exhaust air from the Silent V4 hood to the outside

Renfert catalog number 29330002

Packaging:

• 1 piece

Vario basic Boron carbide nozzle for sandblaster

The quality and speed of sandblasting of castings depends on the combination of the abrasive and the sandblasting nozzle, as well as on the use of the optimal sandblasting technique.

Boron carbide nozzle for the Vario basic sandblaster.

Renfert catalog number 900035520

Packaging:

• 1 piece