AS800 Silent prosthetic lift
High-performance prosthetic lift.
2 options available for purchase:
- start of work after switching on the device
- work start integrated with the device (Effegi Brega sandblasters only)
Technical data:
- Voltage 230 V
- 50 Hz frequency
- Power .. 800 W
- Noise level [EN- 3746 - LpA] 77 dB (A)
- Vibration level ISO 8041 - aw] 0.07 m / s2
- Length 800 mm
- Width 185 mm
- Height 425 mm
- Weight 12 kg
Package:
1 piece
...Box Light work chamber
Chamber for work. Clean and dust-free work in your laboratory. Possibility to connect any suction lift. Equipped with shadowless lighting and a protective glass with a silicone coating to prevent scratching.
Dimensions:
- internal diameter: 200 cm
- exhaust hose diameter: 32 mm
- length: 36 cm
- depth: 28 cm
- height: 19 cm
- weight: 3.6 kg
- package weight: 5.5 kg
Package:
1 piece
...Effegi Brega - Atlantis - Sand-free investment release device Promotion
Effegi Brega, an Italian manufacturer of prosthetic equipment, presents a novelty.
Atlantis - a device for removing investment from castings without the use of sand. Dedicated for the release of works mainly made of pressed ceramics (eg IPS e.max Ceram). Thanks to the use of water under very high pressure, the object is released up to 3 times faster than with traditional sandblasting - at the same time eliminating the risk of surface damage (conventional sandblasting can lead to microcracks in the sandblasted object.
The use of high-pressure water as an abrasive agent instead of sand is a technologically innovative solution that works well in a dental technology laboratory
Advantages:
- significant reduction of the time needed to release the object from the investment material - release lasts 3 times faster than with the traditional sandblasting technique with aluminum oxide (IPS e.max release)
- 3 power levels
- c ...
Heater for the composite Effegi Brega
The composite heater improves the smoothness of composites during injection and molding, speeds up the work and improves the final result. Heating composites (both paste and liquid) improves the ease of application.
Technical data:
- Thermally insulated housing.
- Options available: four 8mm chambers, six 15mm chambers, two 10mm chambers and one 4mm chamber for temperature probe.
- Indoor temperature control accuracy +/- 5 ° C.
- Heating element temperature adjustable from +40 ° C to + 60 ° C
Dimensions:
- Height 120 mm
- Length 110 mm
- 160 mm deep
Package:
- 1 piece.
Steam generator VK 200
Steam generator VK 200 A convenient to use steam generator, perfect for any dental laboratory. It has a separate water tank (we do not fill the boiler) so you do not have to wait for the device to cool down to fill it.
Advantages:
- it does not require connection to the water network as it has its own tank
- 10 minutes after switching on, the device is ready for use
- a yellow light indicates the need to refill the water in the tank
- gun with 3 buttons (blue hot water, blue-red mixture of water and steam, red steam)
Technical data:
- Voltage 230 V
- The frequency of 50 HZ
- Power consumption 1950 W
- Max. working temperature 135 degrees C
- Tank capacity 2.0 dm3
- The heater capacity is 2.2 dm3
- Water consumption 0.2 l / min
- Max. operating pressure 0.4 MPa
- The set pressure of the safety valve is 0.55 MPa
- ...
Steam generator VK 300
Steam generating device with a maximum pressure of 4 bar. Compact, intended for connection to the water network. The housing is made of varnished stainless steel, the cover is made of varnished aluminum.
Advantages:
- control lamps signaling operation
- the pressure gauge allows you to control the pressure in the boiler
- dry steam outlet button
- dry steam nozzle
- reset button to resume the cycle when the pump protection has tripped
- gun operating button
- safety pistol, possibility of working both on the right and on the left side, ergonomic, made of special heat-resistant material
- components - a copper boiler with a capacity of 3.6 l, boiler insulation using fiber resistant to 500 degrees C, casing made of painted stainless steel, copper pipes, brass fittings, safety valve numbered and set to 5.5 bar.
Technical data:
Voltage - 230 V Frequency - 5
...Steam generator VK 400
Steam generator Vk 400.
Steam generating device with a maximum pressure of 8 bar. Compact, intended for connection to the water network. The housing is made of varnished stainless steel, the cover is made of varnished aluminum.
Advantages:
- control lamps signaling operation
- the pressure gauge allows you to control the pressure in the boiler
- dry steam outlet button
- dry steam nozzle
- reset button to resume the cycle when the pump protection has tripped
- gun operating button
- safety pistol, possibility of working both on the right and on the left side, ergonomic, made of special heat-resistant material
- components - a copper boiler with a capacity of 4.8 l, boiler insulation using fiber resistant to 500 degrees C, casing made of stainless, painted steel, copper pipes, brass fittings, safety valve numbered and set to 10 bar.
It is recommended to use a water softe
...Steam generator VK100
Steam generator VK100 The newest compact steam generator from Effegi Brega. 1900 W power, 4 bar pressure. Perfect for any laboratory.
Convenient to use steam generator, perfect for every prosthetic laboratory. It has a separate water tank (we do not fill the boiler) so you do not have to wait for the device to cool down to fill it.
The use of a separate small boiler also allows for faster readiness of the device for operation, energy saving and extends the life of the device because the water tank is not constantly kept under high pressure. [Contrary to the Effega Brega, in the older generation chillers the entire multi-liter water tank is heated and pressurized].
It does not require connection to the water network, because it has its own tank, the device is ready for use after 10 minutes from switching on
Technical data of the VK100:
- Power supply: 230 V / 50Hz
- Power: 1900 W
- Maximum working temperatur ...
Vibrating table Twin Pulsar Promotion
Plaster vibrator. Large and comfortable to use with smooth vibration intensity control and 2 types of vibrations (smooth and dynamic).
Technical data:
- Voltage - 230 V
- Frequency - 50 Hz
- Power - 100 W
- Width - 170 mm
- Length 240 mm
- Height - 90 mm
- Weight - 5 kg
Package:
1 piece.
...