Triplex Hot is an acrylic material that polymerizes at high temperature.

Features:

• Intended for making dentures with the application technique.
• Standard polymerization method (recommended) - Place the framed can in a vessel with cold water. Heat the water to 100 C. Keep boiling for 45 minutes.
• Alternative polymerization method - Place the framed can in a vessel with boiling water and keep it boiling for 20 minutes.
• Pink color with veins.

Indications:

• Complete dentures.
• Partial dentures.
• Combined dentures.
• Relining

Package:

• 3x 500g powder
• 500 ml liquid

4 All nickel-chromium alloy for ceramics.

Features:

• White color
• Compatible with feldspar and low-fusing ceramics.
• Easy casting and processing.
• Reduced hardness.
• Biocompatibility with tissues.

Indications:

• Single crowns.
• Telescopic and conical crowns.
• Bridges with short and long spans.
• Crown-root inlays.

Composition:

• Nothing 61.4%.
• Cr 25.7%.
• Mo 11.0%.
• Si 1.5%.
• Mn <1.0, Al <1.0%.

Technical data:

• Density (g / cm3) - 8.4.
• Melting point range (deg C) - 1260-1350.
• Coefficient of linear thermal expansion 25-500 (x10-6 / degrees C) - 13.8, 20-600 (x 10-6 / degrees C) - 14.1.
• Elongation (%) - 12.0.
• Hardness on the Vickers scale - 235.
• Yield point (0.2% elongati
  ...

4 All nickel-chromium alloy for ceramics.

Features:

• White color
• Compatible with feldspar and low-fusing ceramics.
• Easy casting and processing.
• Reduced hardness.
• Biocompatibility with tissues.

Indications:

• Single crowns.
• Telescopic and conical crowns.
• Bridges with short and long spans.
• Crown-root inlays.

Composition:

• Nothing 61.4%.
• Cr 25.7%.
• Mo 11.0%.
• Si 1.5%.
• Mn <1.0, Al <1.0%.

Technical data:

• Density (g / cm3) - 8.4.
• Melting point range (deg C) - 1260-1350.
• Coefficient of linear thermal expansion 25-500 (x10-6 / degrees C) - 13.8, 20-600 (x 10-6 / degrees C) - 14.1.
• Elongation (%) - 12.0.
• Hardness on the Vickers scale - 235.
• Yield point (0.2% elongati
  ...

Shade guide for AD system

Package:

1 piece.

Automatic test for calibrating porcelain kilns P 500, P 700, EP 3000, EP 5000.

Package:

5 pcs

Chromascop shade guide - key 20 Chromascop colors in 5 groups. Chromascop can be used to define the colors of Vivadent composite materials, and Ivoclar plastic and ceramic materials.

Package:

• 1 piece.

Collado CC is a nickel-free alloy intended for the fabrication of metal frames, for veneering with ceramic material or composite.

Indications:

• crowns
• telescopic crowns
• crown-root inlays
• bridges
• extensive restorations and long bridges
• restorations placed on implants
• extensive frameworks on implants.

Chemical composition:

• Co 59.0% Cr 25.5% Mo 5.5% W 5.0% Ga 3.2% Nb, Fe, B less than 1%

Package:

1 kg

Characteristics :
Ceramic crown-root inlays in a cylindrical shape, made of zirconium oxide, designed for the aesthetic reconstruction of damaged tooth structures with uniformly ceramic restorations in the anterior and posterior parts of the maxilla and mandible.

Features:
& nbsp & nbsp Prosthetic stabilization, strengthening of the rebuilt dead teeth after root canal treatment, with slight damage to the crown part.
& nbsp & nbsp Prosthetic reconstruction of dead teeth after root canal treatment, with a damaged crown part and, as a result, loss of the retention surface.
& nbsp & nbsp The 1.7 mm insert is used in the anterior region for all those teeth where the diameter of the crown part of the canal matches the diameter of the insert.
<

Characteristics :
Ceramic crown-root inlays in a cylindrical shape, made of zirconium oxide, designed for the aesthetic reconstruction of damaged tooth structures with uniformly ceramic restorations in the anterior and posterior parts of the maxilla and mandible.

Features:
& nbsp & nbsp Prosthetic stabilization, strengthening of the rebuilt dead teeth after root canal treatment, with slight damage to the crown part.
& nbsp & nbsp Prosthetic reconstruction of dead teeth after root canal treatment, with a damaged crown part and, as a result, loss of the retention surface.
& nbsp & nbsp The 1.4 mm insert is used in the anterior region only for the second maxillary incisors and for all mandibular incisors.

E .max Ceram - technical shade guide - Dentins according to the Chromascop shade guide

Package:

1 piece.

Gnathostar teeth are designed in accordance with the latest knowledge about the morphology of natural teeth. Due to their shape, color and special layered structure, they can be used in all types of removable dentures.

Features:

• Gnathostar tines conform to DIN 13914 and ISO 3336.
• They are registered and admitted to trading in Poland (certificate number 10184 / M / 94).
• They are produced in five sizes for the maxilla and five sizes for the mandible.
• The color of the teeth follows the Chromascop color key, which includes 20 shades divided into five color groups, and in 16 A-D shades and 4 bleached teeth.
• In each group, the individual shades are marked with increasing numbers as the color intensity increases.
• Gnathostar's tooth colors are compatible with other materials produced by Ivoclar and can be used in the fabrication of all types of dentures.
• Gnathostar teeth have a layered structure th
  ...

Ips d.Sign 96 High gold-content porcelain alloy Specially developed for metal structures used in conjunction with IPS d.Sign Fluoroapatite Glass Ceramics. It can also be used to make metal structures for IPS Classic and IPS Inline ceramics and others.

Indications:

• Recommended for making inlays / onlays,
• partial crowns,
• total crowns,
• telescopic and conical crowns,
• crown-root inlays,
• bridges with short and long spans.

The percentage composition:

• Au - 73.8
• Fri - 8.5
• Pd - 5.4
• Ag - 9.0
• In - 1.9
• Nb - <1
• Mn - <
• Fe - <1
• Ta - <1
• Li - <1
• Ru - <1
• Re - <1

Technical data:

• Type - 4
• Color - yellow
• Density (g / cmł) - 16.7
• Melting temperature (° C) - 1050 - 1170 ...

IPS Style Ceram Build-Up Liquid 250ml soft

Package:

250 ml

IPS Style is an innovative ceramic material for veneering metal structures, which allows you to achieve the highest quality results and a natural look. A characteristic feature of the materials included in IPS Style is the unique crystal lattice, which has been so far unprecedented in this type of material. As a glass ceramics, IPS Style is made of three different crystals: leucite, fluoroapatite and oxyapatite. A novelty in the composition of this material are oxyapatite crystals, which make the restorations made of IPS Style present unique aesthetics.

The content and distribution of crystals in glass ceramics, their viscosity and the carefully selected grain size in the veneering materials affect the physical and chemical properties of the IPS Style material. This principle applies to all layers, from the opaque to the incisal edge, and ensures optimum preparation of the restoration in terms of bonding, compatibility and aesthetic appearance. In addition, the leucite and

IPS Ceramic Etching Gel is an etching agent designed to create an adhesive retention surface for ceramic materials deposited with composite materials. It increases the bond strength of the composite material (cement) with the ceramic surface.

ATTENTION ! The material cannot be used directly in the mouth.

Package:

5 ml gel

Porcelain insulator.

This liquid is used to cover surfaces that have been previously impregnated with IPS Model Sealer or IPS Margin Sealer. Provides complete isolation of the ceramic material from the plaster model or post. The fluid can be used with all Ivoclar Vivadent ceramics.

Package:

• 15 ml.

IPS Classic modeling liquid for ceramic masses.

Tanning:

• 60ml.

IPS Classic modeling liquid for ceramic masses.

Package:

• 250ml.

Glaze liquid.

Consistency fluid for enamel paste, IPS Stains P stains, IPS Shade and opaques.

Package:

• 15ml.

IPS Classic Glazing Paste, glaze.

Features:

• It comes in the form of a paste.
• Gives a natural mirror shine.

Package:

• Syringe with 3g of paste.

Fluid to the Margin.

Package:

• 60 ml.

IPS Classic Opal Incisal are iridescent materials of the incisal edge.

Features:

• They come in five colors S1 to S5.

Package:

• 100 g

IPS Classic Opal Schneide / Incisal opalescent incisal materials.

Features:

• They come in five colors S1 to S5.

Package:

• 20g.

IPS Classic Transparent are transparent materials designed to recreate the natural appearance of the incisal edge.

Features:

• They are available in four colors T1 to T4.

Package:

• 20g.

• IPS Classic is a well-proven ceramic material that offers great design freedom. Due to the balanced particle distribution, the material is perfectly modelable and stable, even after several firing cycles.

Features:

• Dentine is available in 16 colors according to Vity

Package:

100 g

IPS Classic is a well-proven ceramic material that offers great design freedom. Due to the balanced particle distribution, the material is perfectly modelable and stable, even with several firing cycles.

Features:

• V dentine is available in 16 Vita colors.

Packaging:

• 20g.

IPS Classic V Schneide / Incisal are incisal weights.

Features:

• They come in four colors S1 to S4.

Package:

• 20g.

IPS Classic margin, mass intended for the reconstruction of the cervical area.

Package:

20g.

IPS Classic V Opaque Dentin, low translucency ceramic materials.

Features:

• They do not change the original color of the dentin.
• It is available in 16 colors according to Vita.

Package:

20g.

IPS Classic V Opaquer Paste, fuel mass.

Features:

• The paste-like packs provide good covering properties, even when applied with a thin layer.
• They are very convenient and economical to use.
• It comes in 16 colors according to Vita

Package:

Syringe with 3g of paste.

IPS Classic V Transpa is a transparent mass designed to recreate the natural appearance of the incisal area.

Features:

• It comes in Clear and Neutral colors.

Package:

• 20g.

The IPS Contrast Spray Chairside is intended for the preparation of the oral cavity before the optical recording of the situation. With the help of the IPS Contrast Spray Chairside, the different optical properties of the natural tooth (dentin and enamel) are smoothed out to obtain the best possible registration. The optimized geometry of the rotatable disposable cannula allows it to reach the preparation. IPS Contrast Spray is available in blue and has a lemon flavor.

Package:

1 piece

IPS d.SIGN Brilant Dentin

Features:

• Low translucency, characterized by high color saturation.

Package:

20g.

IPS d.SIGN Cervical Incisal is a very translucent, slightly colored incisal material. Designed for use in the cervical area to achieve a natural depth effect. These masses are distinguished by very strong white fluorescence.

Features:

• It comes in 4 colors

Package:

20g

IPS d.SIGN Deep Dentin AD is a material used to increase the color intensity in layers that can be applied in a limited thickness.

Features:

• There is no color titer relative to the base dentine shade.
• Increased color quality and intensity.
• It comes in 16 A- D colors.

Package:

20g.

IPS d.SIGN Dentin AD, a specially developed ceramic glass which, thanks to the content of fluoroapatite, gives prosthetic restorations a natural look. Fluoroapatite also improves optical properties.

Features:

• High color stability.
• Natural fluorescence.
• It comes in 16 A- D colors.

Package:

20g.

IPS d.SIGN Effect. Effect 1 shows natural-like opalescence combined with high translucency. The brightness of the masses gradually increases from Effect 2 to Effect 4. In contrast, the mass with a shade of purple reduces the brightness in the incisal area.

Features:

• It comes in 6 shades.

Package:

20g.

IPS d.SIGN Opaquer Gingiva.

Opaque in pink for Gingiva.

Package:

3g

IPS d.SIGN Incisal Edge allows you to achieve the so-called halo effect, which is created in natural teeth by refracting light at the incisal edges.

Package:

20g.

IPS d.SIGN Margin AD, mass intended for the reconstruction of the cervical area.

Features:

• High fracture toughness and edge strength.
• Good firing stability.
• It comes in 16 A- D colors.

Package:

20g.

IPS d.SIGN Margin Builid-Up Liquid, margin fluid.

Package:

60ml.

IPS d.SIGN modeling liquid for ceramic masses.

Package:

250ml.

IPS d.SIGN Opaqer Liquid, opaque liquid.

Package:

15ml.

IPS d.SIGN Opaquer Paste AD, opaque mass.

Features:

• Paste packets provide excellent masking properties, even when using a thin layer.
• Convenient and economical to use.
• They come in 16 A- D colors.

Package:

Syringe with 3g of paste.

IPS d.SIGN T Incisal, incisal masses.

Features; - They come in 3 colors.

Package:

100 g.

PS d.SIGN T Incisal, transparent incisal materials.

Features; - They come in 3 colors.

Package:

20g.

IPS d.SING Transparent, transparent materials.

Features:

• Available in four shades.

Package:

20g

IPS e.max CAD are lithium disilicate glass-ceramic blocks for CAD / CAM technology. The manufacturing process guarantees that the blocks are completely uniform. The pre-crystallized (blue) block is very easy to process in a CAD / CAM machine. The block in its pre-crystallized state has a characteristic white color that goes through the shade of blue to blue-gray. This color depends on the composition and structure of the glass ceramics. The strength of the material in this state is 130-150 MPa and is therefore comparable with other glass-ceramic blocks currently available on the market. After the blocks are cut out, the restoration is crystallized in an Ivoclar Vivadent ceramic kiln (eg Programat CS). The crystallization process is easy to carry out and, unlike other CAD / CAM systems, the restorations made in this way do not shrink and do not require a time-consuming infiltration process, and the entire process takes about 20-25 minutes. Crystallization at the temperature of 840 °

IPS e.max Ceram Transpa Incisal, incisal material.

Package:

100 g.

IPS e.max Alox Plunger. The pistons are used to force the molten material into the mold in a ring of investment.

Features:

• They are shorter and larger in diameter than the pistons from the Empress system.
• The pistons are rounded on both sides, so they can be used for stamping with both ends.

Package:

2 pcs.