Special Offers
* Primo Splint KIT - universal light-curing molding material
A light-cured multifunctional composite material for use in dental prosthetics.
Advantages:
- quick and easy work due to easy forming
- the consistency resembles plasticine at room temperature (no need to heat)
- polymerizes in most curing lamps
- extremely precise, no shrinkage, expansion or distortion
- safe for allergy sufferers, does not contain MMA and peroxides
- can be sterilized in autoclaves and cleaned with hot steam
- easily combines with other materials (thermoformable tiles, acrylic)
- no taste and smell, easy to repair
Application:
- templates for implants
- "Michigan" rails
- splints for bruxists
- short circuit lifting rails
- CT scan guides
- transfers and guides for implants
- PIB - Procera implant bridges
- control keys
- keys for cementing veneers
Package:<
...
0 degree milling kit
A set of drills and erasers for milling 0 degrees
Package:
1 set contains 12 cutters and 6 rubbers
...
1000ml separate
Separate liquid for acrylic-gypsum and gypsum-gypsum insulation. Preparation for technical and dental works. It is designed to isolate the surface of plaster molds from acrylic dough for dentures, veneers for crowns, crowns and other prosthetic works. Creates the appropriate thickness of an insulating membrane depending on the type. The individual types differ in color.
Features:
- The pink separate can be used universally.
- Slow-drying blue separate absorbed by gypsum recommended in pressure techniques, holds well, does not come off.
Package:
1000 ml.
...
155mm rag
A cloth for a polisher for high-gloss polishing of metal, acrylic. Diameter 155mm.
Package:
1 piece.
...
17.5mm Bi-Pin without a needle
Nickel plated pin with double guiding for secure and non-rotational seating of the post. Precise fit with light friction between pin and sleeve. It does not oxidize even after a long time.
Technical data:
- pin length - 17.5mm
- head length - 5.5mm
- head diameter - 2.0mm
- max width of the T-shirt - 3.6mm
Package:
100 pins + 100 sleeves
...
2.5mm wax wire Bego
Medium-hard green wax wire for foundry channels 2.5mm thick.
Features:
- Easy to form, does not bend and burns without residue.
- High resistance to deformation and compression during forming.
Package :
Roll of 250g (about 50m).
...
250 um saline sand 5 kg
Sand for sandblaster 250 microns.
Composition:
- Al2O3 content: more than 99%
- Dopants: Na20, K20, CaO, SiO2 and Fe2O
- Specific density: 3.95 +/- 0.5 g / cm3
- Bulk density: 1.52-1.85 g / cm3
- Hardness: over 9 on the Mohs scale
- Grain shape: sharp-edged
Package:
5 kg.
...
2mm garter type mouldable fibers
2mm garter type mouldable fibers.
Application:
- Support for permanent composite restorations such as crowns, bridges, inlays, onlays
- Splinting loose teeth
- Orthodontic retainers
- Individual crown-root inlays
Instructions for use:
- Prepare teeth in accordance with applicable rules.
- In the indirect method, isolate the teeth with petroleum jelly / silicone or make an impression and model of sharp contour plaster.
- In the indirect method, not recommended, etch and cover the teeth with a bonding system, protect the gum with foil.
Fiber Fixing:
- Simple bending: Remove the orange cover, press the entire fiber to the composite through the transparent cover, irradiate with 5 mm sections
- Complicated course. Release the fiber from both sheaths with 3-5 mm sections, holding the orange sheath towards the light, expose ...
3-way screw BERTONI A
Stainless steel multi-section screw according to Bertoni.
Features:
- With three independent sections.
- For Y plates
- Reinforced guides.
- 4mm travel in each segment.
Package:
1 piece
...
3m suction hose + 2 end couplings
Suction hose, 3 m (plus 2 end fittings)
Renfert catalog number 900034240
Package:
1 set
...
3mm garter type mouldable fibers
3mm garter type mouldable fibers.
Application:
- Support for permanent composite restorations such as crowns, bridges, inlays, onlays
- Splinting loose teeth
- Orthodontic retainers
- Individual crown-root inlays
Instructions for use:
- Prepare teeth in accordance with applicable rules.
- In the indirect method, isolate the teeth with petroleum jelly / silicone or make an impression and model of sharp contour plaster.
- In the indirect method, not recommended, etch and cover the teeth with a bonding system, protect the gum with foil.
Fiber Fixing:
- Simple bending: Remove the orange cover, press the entire fiber to the composite through the transparent cover, irradiate with 5 mm sections
- Complicated course. Release the fiber from both sheaths with 3-5 mm sections, holding the orange sheath towards the light, expose ...
4 all metal for porcealan 250g
4 All nickel-chromium alloy for ceramics.
Features:
- White color
- Compatible with feldspar and low-fusing ceramics.
- Easy casting and processing.
- Reduced hardness.
- Biocompatibility with tissues.
Indications:
- Single crowns.
- Telescopic and conical crowns.
- Bridges with short and long spans.
- Crown-root inlays.
Composition:
- Nothing 61.4%.
- Cr 25.7%.
- Mo 11.0%.
- Si 1.5%.
- Mn <1.0, Al <1.0%.
Technical data:
- Density (g / cm3) - 8.4.
- Melting point range (deg C) - 1260-1350.
- Coefficient of linear thermal expansion 25-500 (x10-6 / degrees C) - 13.8, 20-600 (x 10-6 / degrees C) - 14.1.
- Elongation (%) - 12.0.
- Hardness on the Vickers scale - 235.
- Yield point (0.2% elongati ...
4.0 mm wax wire Bego
Wax wire for foundry channels, green 4.0mm.
Features:
- Easy to form, does not bend and burns without residue.
- High resistance to deformation and compression during forming.
- Medium-hard
Package:
Roll of 250g. (approx. 21m)
...
4: 1 impression material gun
4: 1 ratio dispenser for silicone impression materials and temporary crown materials
Package:
1 piece
...
4ALL 1 kg
4 All nickel-chromium alloy for ceramics.
Features:
- White color
- Compatible with feldspar and low-fusing ceramics.
- Easy casting and processing.
- Reduced hardness.
- Biocompatibility with tissues.
Indications:
- Single crowns.
- Telescopic and conical crowns.
- Bridges with short and long spans.
- Crown-root inlays.
Composition:
- Nothing 61.4%.
- Cr 25.7%.
- Mo 11.0%.
- Si 1.5%.
- Mn <1.0, Al <1.0%.
Technical data:
- Density (g / cm3) - 8.4.
- Melting point range (deg C) - 1260-1350.
- Coefficient of linear thermal expansion 25-500 (x10-6 / degrees C) - 13.8, 20-600 (x 10-6 / degrees C) - 14.1.
- Elongation (%) - 12.0.
- Hardness on the Vickers scale - 235.
- Yield point (0.2% elongati ...
4x1.7 mm sublingual wax profiles
Sublingual arches for the lower jaw.
Features:
- Teardrop shape.
- Size 4.0 x 1.7mm.
Package:
65g / pack
...
4x2 mm sublingual wax profiles
Sublingual wax arches for the lower jaw
Features:
- Teardrop shape.
- 4.0x2.0mm.
Package :
65g / pack
...
50mm lamb brush
Cotton brush "lamb".
Features:
- Very delicate.
- 50mm diameter.
- On the polisher.
Package:
1 piece.
...
9.0mm Adams buckles
Adams buckles mesial - distal 9.0mm.
Features:
- Wire 0.7mm / 28.
- Hardness class sprung - hard 1800-2000 MPa.
Package:
10 pcs.
...
A handle for winding the modeller
A colorful handle for winding the modeler's tip. Reversible.
Attention:
Numbers for selecting tips to be screwed onto the handle
8690
8695
Package:
- 1 piece.
Acetal - aluminum rollers with J100 plugs
Acetal aluminum rollers with plugs for J100 injection molding machine.
Package:
1 pc roller + 1 cork
...
Acetal Acecril acetal / acrylic glue
Adhesive providing a chemical bond between acetal and acrylic. Strengthens and improves the maintenance of acrylic saddles in acetal skeletal dentures. It prevents the acrylic from peeling off (sticking out) from the acetal surface and the accumulation of food debris in the denture.
Package:
1 piece
...
Acetal-can type 200
Acetal type 200 can Injection and polymerization of all acrylic resins
Thanks to the 200-type can, two dentures can be made and polymerized simultaneously in record time in just 30 minutes
Package:
1 piece.
...
Adams 8.0mm buckles
Adams buckles mesial - distal 8.0 mm.
Features:
- Wire 0.7 mm / 28.
- Hardness class: elastic - hard 1800- 2000 MPa.
Package:
10 pcs.
...
Adams buckles 10.0mm
Adams buckles mesio-distal 10.0 mm.
Features:
- Wire 0.7mm / 28.
- Hardness class sprung - hard 1800-2000 MPa.
Package:
10 pcs.
...
Adams buckles 11.0mm
Adams buckles mesial - distal 11.0mm.
Features:
- Wire 0.7 mm / 28.
- Hardness class sprung - hard 1800-2000 MPa.
Package:
10 pcs.
...
Adams buckles 12.0mm
Adams buckles mesial - distal 12.0mm.
Features:
- Wire 0.7mm / 28.
- Hardness class sprung - hard 1800-2000 MPa.
Package:
10 pcs.
...
Adams buckles 7.0mm
Adams buckles mesial - distal 7.0 mm.
Features:
- Wire 0.7mm / 28.
- Hardness class sprung - hard 1800-2000 MPa.
Package:
10 pcs.
...
Adams Orthodontic Wire Forming Forceps
Adams forceps for forming clamps and wire. For wire max 0.7 mm, made of the highest quality stainless steel.
Package:
1 piece.
...