Product Code: 1381
Qty: Out Of Stock
Erkoform 3D+
Erkodent

1,928.01€ +vat

2,371.45€ incl tax

Erkoform 3D+

Erkoform 3D + is a device for vacuum deep-moulding.

Characteristics:

  • Temperature measurement sensor.
  • Touch panel with menu in Polish.
  • Does not require connection to the compressor.
  • Before pressing, a vacuum is created immediately.
  • No preheating required.
  • Vertical foil stamping guarantees even thickness of the work performed.
  • Easy access to the model during heating.
  • Plenty of space for tall models.
  • Telescopic and tilting film application.
  • Practical, one-handed clamping of foils up to 5 mm thick.

Technical data:

  • Dimensions - 37.0 x 35.0 x 31.5 cm.
  • Power - 230V/50Hz; 340W
  • max. vacuum 0.8 bar.
  • Noise < 70dB(A).
  • Weight 11.9 kg.
  • 12 months warranty

Packaging:

  • Erkoform-3d+, film trial pack, film retaining ring, granulate collecting device, model plate, granulate container, granulate filling brush with rubber cap, on-off magnet, power cable, white working tray, filling pellets, machine documentation ( folder)

Product Code: 1381
Brands Erkodent
Erkoform 3D+

1,928.01€ +vat

2,371.45€ incl tax

Product Code: 2727
Qty: 2-3 Days
Dunaform Plus pressure former
Al Dente

2,417.27€ +vat

2,973.24€ incl tax

Dunaform Plus pressure former

Our DUNAFORM PLUS pressure molding device is a new generation device.

Advantages:

  • Menu driven and user friendly service.
  • Large and clear display.
  • Fixed press programs + 10 freely programmable memory locations.
  • Time information is provided visually and acoustically.
  • There is no need to preheat, the shortwave infrared heater will instantly set the desired temperature.
  • The foil is heated with the side facing the model.
  • Possibility of embossing foil with a diameter of 120 mm and 125 mm.
  • Almost all commercially available foils can be used in this way.

Technical data:

  • Electric power supply: 230V/50Hz.
  • Power : 850W
  • Weight: approx. 8.5 kg.
  • Width: 350mm.
  • Depth: 300mm.
  • Height: 190mm.

Packaging:

  • 1pc device + trial set of film and 2 kg of granulate.

Product Code: 2727
Brands Al Dente
Dunaform Plus pressure former

2,417.27€ +vat

2,973.24€ incl tax

Product Code: 4258
Qty: Out Of Stock
Erkoform 3D Motion
Erkodent

2,127.69€ +vat

2,617.06€ incl tax

Erkoform 3D Motion

  • Automated deep-drawing process.
  • Non-contact temperature sensor.
  • Backup vacuum and touch panel for all functions.
  • The foil temperature is displayed all the time; the deep-drawing process starts automatically as soon as the deep-drawing temperature is reached.

Benefits:

  • A compressed air connection is not required;
  • No time required for preheating;
  • The vacuum formed before the sudden fit deep-drawing process;
  • Vertical stretch and fit to ensure even film thickness;
  • Automatic foil lowering with obstacle detection;
  • Simple operation via high-resolution 3.2 inch color TFT display (resistive touch panel)
  • Foil memorization for quick setting of the necessary parameters;
  • Free programming of foil parameters.

Technical data:

  • Dimensions35.0 x 37.0 x 31.5 cm.
  • Power supply 230V/50Hz;
  • Power Consumption 380W
  • 280 W medium wave infrared heater
  • Infrared temperature sensor with measuring range up to 240 °C.
  • Vacuum max. 0.8 bar, 6.0 l/min.
  • Sound pressure level < 70 dB(A).
  • Foil diameter 120 mm.
  • film thickness max. 6.0 mm.
  • Weight 13.1 kg.
  • Warranty 24 months.

Packaging:

  • Erkoform 3d motion - complete with network cable,
  • foil tightening ring,
  • granulate tank,
  • centering disc for retrofitting the Occluform-3 occluder,
  • model plate,
  • 1300 g of stainless steel filler granulate.
  • brush with a magnet for filling granules.
  • replacement screen protector
  • foil trial pack.

Product Code: 4258
Brands Erkodent
Erkoform 3D Motion

2,127.69€ +vat

2,617.06€ incl tax

Product Code: 7123
Qty: 8
Plastvac P7 vacuum former
Bio-Art

308.82€ +vat391.59€

379.84€ incl tax

Plastvac P7 vacuum former

Vacuum device for forming thermoplastic tiles. Adapted to the use of both round (125mm diameter) and square inserts. with sides from 125mm to 130mm.

Application:

  • Matrices for composite resins.
  • Temporary and makeshift bridges.
  • Guards and positioners.
  • Soft and hard teeth whitening trays.
  • Splints used in the prophylaxis of bruxism.
  • Relaxation rails.
  • surgical templates.

Technical data:

  • Power supply: 220 - 240V
  • Heater power: 450 W
  • Suction motor power: 1400W.
  • Dimensions: (length × width × height) 180 × 230 × 290 mm.
  • Weight: 4.5 kg.

Packaging:

  • 1 piece.

Product Code: 7123
Brands Bio-Art
Plastvac P7 vacuum former

308.82€ +vat391.59€

379.84€ incl tax

Product Code: 7798
Qty: Out Of Stock
SCAN Drufomat
Dreve

3,541.58€ +vat

4,356.15€ incl tax

SCAN Drufomat

Modern pressure molding device with self-explanatory keyboard and display function of all parameters.

Drufomat SCAN gives excellent results when stamping all types of thermoformable foils.

Application:

  • Whitening trays.
  • Splints for athletes (2 and 3 layers).
  • Retainers.
  • Positioners.
  • Individual spoons.
  • Bruxism splints.
  • Appliances for snorers.
  • Impression trays.
  • Dressing templates.

Full automation ensures comfort and safety of work.

Advantages:

  • Loading all stamping parameters using the built-in scanner.
  • High working pressure of 6 bar for all professional applications.
  • Simple operation, easy to use keyboard.
  • Vertical adjustment of the foil to the model.
  • For all types of foil between 0.1 mm and 5.0 mm.
  • Two-handed operation and LEDs that light up when the heating is on.

Technical data:

  • Dimensions (height, width): 460 x 290 x 290 mm.
  • Voltage 115- 240V 50/60 Hz.
  • Power max 315 W.
  • Variable pressure adjustable in the range of 2-6 bar.
  • For foil with a diameter of 120 mm.
  • Weight 16 kg.

Packaging:

  • 1pcs with accessories.

Product Code: 7798
Brands Dreve
SCAN Drufomat

3,541.58€ +vat

4,356.15€ incl tax

Product Code: 7879
Qty: Out Of Stock
Drufosmart pressure stamping machine DREVE
Dreve

1,817.64€ +vat

2,235.70€ incl tax

Drufosmart pressure stamping machine DREVE

Benefits:

  • Suitable for all films with a material thickness between 0.1 mm and 5.0 mm.
  • Overheating protection by automatic switch-off of the heat radiator after the end of the heating time.
  • Digital and acoustic control of the heating and cooling phase.
  • Safe to use by two-handed control.

Technical data:

  • 32.0 x 29.0 x 42.0 cm
  • 100-240 V, 50/60 Hz
  • max. 315 W
  • operating pressure 2.5 bar
  • used foils ø 120 mm and 120 x 120 mm
  • 15.0 kg.

Package:

  • 1 piece.

Product Code: 7879
Brands Dreve
Drufosmart pressure stamping machine DREVE

1,817.64€ +vat

2,235.70€ incl tax

Product Code: 7880
Qty: Out Of Stock
Dreve Vacfomat V9
Dreve

9,537.91€ +vat

11,731.63€ incl tax

Dreve Vacfomat V9

A modern vacuum device designed for large-scale production of "clear-aligner" devices. It allows you to produce 9 cameras during one thermoforming process, resulting in up to 108 cameras per hour. At the end of the warm-up time, a very powerful vacuum pump is activated and performs plate alignment on the 9 models placed in the machine simultaneously.

Advantages:

  • takes up less space, saves time
  • lower material costs (we press 9 apparatuses from 1 sheet)
  • higher production volume

Vacfomat V9 works with Biolon plates with dimensions of 354 x 354 mm, in the following thicknesses traditionally used in "clear-aligner" devices:

  • 0.5mm
  • 0.625 mm
  • 0.75 mm
  • 1.0 mm

Technical data:

voltage: 220-240V 50-60HZ vacuum: 32li / Min absolute 100mbar handle dimensions: 354x354 mm device dimensions 415x488x600mm

Package:

1 piece.

Product Code: 7880
Brands Dreve
Dreve Vacfomat V9

9,537.91€ +vat

11,731.63€ incl tax

Product Code: 7891
Qty: Out Of Stock
Dreve - Funky Tool
Dreve

505.94€ +vat

622.31€ incl tax

Dreve - Funky Tool

An auxiliary device for making multi-colored protectors for athletes, relaxation splints and others from thermoformed plates.

Works with Drufosmart, Drufosmart SCAN and Drufomat SCAN devices.

See how easy it is! http://www.youtube.com/watch?v=OXw7H0gzE7w

Package:

  • 1 piece

Product Code: 7891
Brands Dreve
Dreve - Funky Tool

505.94€ +vat

622.31€ incl tax

Product Code: 8415
Qty: Out Of Stock
Drufosmart Scan with foil recognition. Promotion
Dreve

2,449.88€ +vat

3,013.35€ incl tax

Drufosmart Scan with foil recognition. Promotion

A modern automatic pressure molding device with a self-explanatory keypad and the function of displaying all material parameters on a large screen simplifies the operation. It presses the material at a pressure of 4 Bar with excellent results.

Benefits:

  • Very good shaping results;
  • Suitable for all films with a material thickness between 0.1 mm and 5.0 mm;
  • Integrated digital code scanner captures foil codes;
  • Protection against overheating by automatic switch-off of the heat radiator after the end of the heating time;
  • Digital and acoustic control of the heating and cooling phase.
  • red or silver color

Technical data:

  • 32.0 x 29.0 x 42.0 cm;
  • 100-240 V, 50/60 Hz;
  • max. 315 W;
  • working pressure freely adjustable from 2-4 bar;
  • used films of 120 mm and 120 x 120 mm;
  • 15.0 kg.

Delivery range:

  • Drufosmart scan complete with power cord, granulate drawer, pan and plate with bunches; clamp ring with drain valve; compressed air hose including hose clamp and quick coupling and the basic range of foil.

Product Code: 8415
Brands Dreve
Drufosmart Scan with foil recognition. Promotion

2,449.88€ +vat

3,013.35€ incl tax

Product Code: 14238
Qty: 4
B-Form Silent Manual vacuum molder Promotion Hits of the Month
Bart Medical

372.90€ +vat

458.66€ incl tax

B-Form Silent Manual vacuum molder Promotion Hits of the Month

Manual vacuum molder.

Thermoforming device with excellent parameters. Made of the highest quality materials. It has an attractive and modern appearance. The latest generation vacuum pump ensures quiet operation and strong adhesion of the tile to the model. The heater heats the plates quickly and evenly. The working platform is compatible with any type of tiles: square 125 x 125 mm, round with a diameter of 120 and 125 mm.

Technical data:

  • height 33 cm
  • width 24 cm
  • depth 28 cm
  • weight 5.1 kg

Parameters:

  • 230V power supply
  • power 325 Watts
  • frequency 50Hz
  • Final pressure mbar
  • noise level 56 dB (A)
  • engine power 80Watt

Packaging:

  • 1 piece

Product Code: 14238
B-Form Silent Manual vacuum molder Promotion Hits of the Month

372.90€ +vat

458.66€ incl tax

Product Code: 16170
Qty: 2-3 Days
B-Form Deluxe Automatic Vacuum Molder. Promotion of the Hits of the Month
Bart Medical

974.22€ +vat

1,198.29€ incl tax

B-Form Deluxe Automatic Vacuum Molder. Promotion of the Hits of the Month

Fully automatic DELUXE model for excellent thermoforming results. After selecting the type of plate to be molded, the machine automatically carries out the entire process.

Benefits:

  • Color LCD display with a simple and intuitive interface.
  • Strong and quiet vacuum pump of the latest generation,
  • Perfect precision and short execution time.
  • A very large hopper for stainless steel granules, which makes it possible to stamp on plaster models with bases, always achieving perfect results.
  • Pressure plate compatible with square and round plates: square 125 x 125 mm, round 120 and 125 mm.
  • Infrared heating element: the heat is evenly emitted down towards the heated plate.
  • Infrared temperature sensor for precise detection of the actual temperature of the plate.
  • Automatic activation of the clamping plate.
  • Energy saving device.
  • Automatic standby after 10 min. inactivity.
  • Sufficient space for tall plaster models.
  • Access to the plaster model in the heating phase.
  • Easy insertion of discs up to a thickness of 5 mm.

Package:

  • 1 piece

Product Code: 16170
B-Form Deluxe Automatic Vacuum Molder. Promotion of the Hits of the Month

974.22€ +vat

1,198.29€ incl tax

Showing 1 to 11 of 11 (1 Pages)