Acetal Dental 500 g
ACETAL DENTAL - is a non-toxic material and does not cause allergies.
It is a suitable replacement for acrylic resin and metal in many prosthetic works.
Acetal application:
aesthetic buckles for dentures, the so-called skeletal,
partial dentures,
bridges and bridges for telescopes,
prosthetic elements on implants,
bite and stabilizing splints,
retention elements on the beams which are also reinforcement.
Injection temperature - 220 degrees C Material melting time - 20 minutes Injection and heating - 2-3 minutes Cooling time under constant pressure - 20-40 minutes Working pressure - 4.0 Bars
Package:
500 g
FJP Thermoplastic Resin
The new thermoplastic resin is an alternative to commonly used materials from the group of polyamides or "nylons" such as: "Valplast", "Flexite", "Flexi J". Dental prostheses made of these materials are famous for their high aesthetics and recognition among patients who use such prostheses. Traditional polyamides, apart from their undoubted advantages, also have disadvantages that make it difficult to process and keep clean dentures made of them. Many years of research into the improvement of nylon materials have led to the creation of a new material devoid of these drawbacks.
Pressing Dental, FJP material has the following features:
- It is slightly flexible, making it very easy to process, using traditional methods and tools. Reduced flexibility has a positive effect on the prosthetic base, does not cause trauma associated with the use of a flexible denture.
- it is translucent, thanks to which it perfectly blends with the patient's mucosa, making the used prosthesis imperceptible in the mouth.
- Contrary to traditional nylons, it almost does not absorb water (only 1/3 of traditional nylon), which significantly extends the life of dentures.
- It has very good color stability, it does not discolor during use.
- Precision ensures very good adhesion to the substrate.
- It does not deform.
- It can be sterilized at 120 degrees Celsius.
- It does not create air bubbles even with very thin elements.
- It does not need to be drained before injection.
- It is easy to process and can be polished well.
- Bonds chemically with acrylic using glue.
- It can be repaired and made corrections.
- Once remelted, it can be injected a second time (40-50% should be added to the new material) without losing its mechanical and physical properties.
Package:
250 g.
Thermo Bridge Pink 200g
Thermo Bridge pink color. Acrylic resin free from monomer for injection under pressure.
Application:
- removable dentures
- partial dentures
- complete dentures.
Package:
200g
Villacryl Thermo Press 250g
The highest-quality microcrystalline material based on polyamide ensures a perfect fit of the dentures, color stability and easy processing guaranteeing a perfectly smooth and shiny surface of the prosthesis.
Villacryl Thermo Press is dedicated to all dentures, such as:
- complete dentures,
- partial dentures,
- microprostheses,
- retention elements in frame dentures,
- relaxation splints,
- space keepers.
Available in 4 colors:
- T2 milky pink
- T3 dark pink
- T4 pink
- 0 transparent
Package:
250 g
Deflex - M10 XR - L 32.6g diameter 22mm - complete dentures + large partial
Modern polymer-based thermoplastic material for universal use. Flexible with increased hardness compared to other thermoplastic materials. Low contraction (0.6%) guarantees a good fit of the denture. It is chemically combined with traditional "cold" acrylic, so that the material can be repaired and relined in a traditional way.
Application:
- Complete dentures,
- partial dentures with supports,
- overdenture dentures,
- partial dentures on clasps
The colors of the Deflex materials are a combination of translucency and shades of pink which enable the effect of "adaptation" of the prosthesis to the natural color of the patient's teeth and gums. These effects only become visible when you place the work in your mouth.
Features:
- Does not contain residual monomer. Very easy to polish to "high gloss".
- Thanks to its stiffness and fracture resistance, it allows you to perform work of reduced thickness with delicate pelottes.
- The absorption index at the level of 0.3% guarantees long-term use of the prosthesis without affecting its aesthetics
- All Deflex cartridges are packed in a way that guarantees proper behavior of the material during injection and processing. Before thermoplastic materials are subjected to thermal processes, they are sensitive to moisture, therefore Deflex tubes, apart from plastic protective packaging, also contain a preparation that protects the material against excess moisture.
Available in colors:
- Banner
- Soft Pink - slightly veined pink transparent
- Medium Pink - veined pink
- Intense Pink - veined intense pink (opaque for working on frameworks)
Package:
tube 32.6 g
Deflex - Classic L - 32.6g diameter 22mm - complete dentures + large partial
Semi-hard polyamide for thermal injection.
Application:
All partial dentures.
Features:
Natural polyamide is perfect for all types of removable partial restorations, even with thin clamps. Compared to traditional "soft nylons", the material is distinguished by high hardness while maintaining adequate flexibility in the retention areas where it is necessary for the proper functioning of the restoration. Reduced fluid absorption makes it easier to maintain hygiene in the denture. It does not cause allergies.
Available in colors:
- Banner
- Soft Pink - slightly veined pink transparent
- Intense pink - intensely pink veined
Packed in a tube protecting against harmful external factors (moisture, sunlight).
Package:
Tube: 32.6 g
Deflex - Classic M - 23.2g, diameter 22mm - partial dentures
Characteristic:
Semi-hard polyamide for thermal injection.
Application:
All partial dentures.
Features:
Natural polyamide is perfect for all types of removable partial restorations, even with thin clamps. Compared to traditional "soft nylons", the material is distinguished by high hardness while maintaining adequate flexibility in the retention areas where it is necessary for the proper functioning of the restoration. Reduced fluid absorption makes it easier to maintain hygiene in the denture. It does not cause allergies.
Available in colors:
- Banner
- Soft Pink - slightly veined pink transparent
- Intense pink - intensely pink veined
Packed in a tube protecting against harmful external factors (moisture, sunlight).
Package:
Tube: 23.2g
Deflex - Classic S - 14.9g, diameter 22mm - repairs - touching the buckle
Characteristic:
Semi-hard polyamide for thermal injection.
Application:
All partial dentures.
Features:
Natural polyamide is perfect for all types of removable partial restorations, even with thin clamps. Compared to traditional "soft nylons", the material is distinguished by high hardness while maintaining adequate flexibility in the retention areas where it is necessary for the proper functioning of the restoration. Reduced fluid absorption makes it easier to maintain hygiene in the denture. It does not cause allergies.
Available in colors:
- Banner
- Soft Pink - slightly veined pink transparent
- Intense pink - intensely pink veined
Packed in a tube protecting against harmful external factors (moisture, sunlight).
Package:
Tube: 14.9g
Deflex - M10 XR - M 23.2g diameter 22mm - partial dentures
Characteristic:
Modern polymer-based thermoplastic material for universal use. Flexible with increased hardness compared to other thermoplastic materials. Low contraction (0.6%) guarantees a good fit of the denture. It is chemically combined with traditional "cold" acrylic, so that the material can be repaired and relined in a traditional way.
Application:
Complete dentures, partial dentures with supports, overdentures, partial dentures with latches
The colors of the Deflex materials are a combination of translucency and shades of pink which enable the effect of "adaptation" of the prosthesis to the natural color of the patient's teeth and gums. These effects only become visible when you place the work in your mouth.
Features:
Does not contain residual monomer. Very easy to polish to "high gloss". Thanks to its stiffness and fracture resistance, it allows you to perform work of reduced thickness with delicate pelottes. The absorption index at the level of 0.3% guarantees many years of use of the prosthesis without affecting its aesthetics. All Deflex cartridges are packed in a way that guarantees the proper behavior of the material during injection and processing. Before thermoplastic materials are subjected to thermal processes, they are sensitive to moisture, therefore Deflex tubes, apart from plastic protective packaging, also contain a preparation that protects the material against excess moisture.
Available in colors:
- Banner
- Soft Pink - slightly veined pink transparent
- Medium Pink - veined pink
- Intense Pink - veined intense pink (opaque for working on frameworks)
Package:
Tube: 23.2 g
Deflex - M10 XR - S 14.9g diameter 22mm - repairs - touching the buckle
Characteristic:
Modern polymer-based thermoplastic material for universal use. Flexible with increased hardness compared to other thermoplastic materials. Low contraction (0.6%) guarantees a good fit of the denture. It is chemically combined with traditional "cold" acrylic, so that the material can be repaired and relined in a traditional way.
Application:
Complete dentures, partial dentures with supports, overdentures, partial dentures with latches
The colors of the Deflex materials are a combination of translucency and shades of pink which enable the effect of "adaptation" of the prosthesis to the natural color of the patient's teeth and gums. These effects only become visible when you place the work in your mouth.
Features:
- Does not contain residual monomer. Very easy to polish to "high gloss".
- Thanks to its stiffness and fracture resistance, it allows you to perform work of reduced thickness with delicate pelottes.
- The absorption index at the level of 0.3% guarantees long-term use of the prosthesis without affecting its aesthetics
All Deflex cartridges are packed in a way that guarantees proper behavior of the material during injection and processing. Before thermoplastic materials are subjected to thermal processes, they are sensitive to moisture, therefore Deflex tubes, apart from plastic protective packaging, also contain a preparation that protects the material against excess moisture.
Available in colors:
- Banner
- Soft Pink - slightly veined pink transparent
- Medium Pink - veined pink
- Intense Pink - veined intense pink (opaque for working on frameworks)
Package:
tube 14.9 g
Acrilato - injection acrylic without residual monomer - cartridge 32.6 g
Application:
Complete dentures
Features:
Prostheses made of Acrilato fd material are more resistant to mechanical damage and lighter than those made of conventional acrylic.
- They are completely devoid of residual monomer.
- The contraction during polymerization at the level of 0.3% guarantees a perfect fit of the denture in the patient's mouth.
- The material is chemically bonded with traditional "cold" acrylics, which allows for its repair or relining in a simple and quick way.
It does not cause allergies.
Package:
Tube: 32.6g
Deflex Acetal 100g (8 cubes)
Deflex Acetal - is a non-toxic material and does not cause allergies.
It is a suitable replacement for acrylic resin and metal in many prosthetic works. Possible to work without expansion plaster.
Acetal application:
- aesthetic buckles for dentures, the so-called skeletal,
- partial dentures,
- bridges and bridges for telescopes,
- prosthetic elements on implants,
- bite and stabilizing splints,
- retention elements on the beams which are also reinforcement.
Injection temperature - 245 degrees C (+/- 5C) Material melting time - 15min Injection and heating - 30-60 seconds Cooling time under constant pressure - 30 minutes Working pressure - 5.0-7.0 Bar
Package:
8 cubes, min 100g.
Valplast Tube 22mm L
Valplast Popular nylon-based flexible thermoplastic material for the fabrication of partial dentures without metal staples.
Attention:
- should be injected into a cold can
Technical data:
- Heating time / temperature: 10 minutes at 235C
- Setting time (holding the piston): 10 minutes (under the compression of the piston)
- It is not recommended to accelerate cooling with cold water (shrinkage), we cool the can in a natural way.
- Pressure: 6-8 Bar
Package:
Tube L 1 pc.
Valplast Tuba 25mm L
Valplast Popular nylon-based flexible thermoplastic material for the fabrication of partial dentures without metal staples.
Attention:
- should be injected into a cold can
Technical data:
- Heating time / temperature: 10 minutes at 235C
- Setting time (holding the piston): 10 minutes (under the compression of the piston)
- It is not recommended to accelerate cooling with cold water (shrinkage), we cool the can in a natural way.
- Pressure: 6-8 Bar
Package:
Tube 25mm L - 1 pc.
Valplast 250g
Valplast Popular nylon-based flexible thermoplastic material for the fabrication of partial dentures without metal staples.
Attention:
- should be injected into a cold can
Technical data:
- Heating time / temperature: 10 minutes at 235C
- Setting time (holding the piston): 10 minutes (under the compression of the piston)
- It is not recommended to accelerate cooling with cold water (shrinkage), we cool the can in a natural way.
- Pressure: 6-8 Bar
Package:
250g
Valplast 500g
Valplast Popular nylon-based flexible thermoplastic material for the fabrication of partial dentures without metal staples.
Attention:
- should be injected into a cold can
Technical data:
- Heating time / temperature: 10 minutes at 235C
- Setting time (holding the piston): 10 minutes (under the compression of the piston)
- It is not recommended to accelerate cooling with cold water (shrinkage), we cool the can in a natural way.
- Pressure: 6-8 Bar
Package:
500g
Valplast 50g
Valplast Popular nylon-based flexible thermoplastic material for the fabrication of partial dentures without metal staples.
Attention:
- should be injected into a cold can
Technical data:
- Heating time / temperature: 10 minutes at 235C
- Setting time (holding the piston): 10 minutes (under the compression of the piston)
- It is not recommended to accelerate cooling with cold water (shrinkage), we cool the can in a natural way.
- Pressure: 6-8 Bar
Package:
50g
Deflex PEEK OSSIS granules for injection, beige color 20g Promotion
The manual is available in the DOWNLOAD section on www. mikran.pl Injection granules, beige color.
The biocompatible PEEK OSSIS injection material is ideal for:
- individual connectors
- structures of crowns and bridges (1- 2 spans)
- anatomical structures of crowns and bridges
- Maryland bridges
- telescopic crowns
- constructions of beams for overdentures
- hybrid dentures
- other implantoprosthetic works
- removable dentures.
The material can be used to work on a deflex injection molding machine and other devices operating at a temperature of 390 ° C.
PEEK OSSIS removable dentures are made in the traditional canning method (such as acetal), while permanent restorations are made using a special set of rings (adapted only to the Deflex device) and an investment material.
Package:
20 g
Deflex - PEEK Ossis set of rings for frameworks Promotion
Biocompatible PEEK Ossis material for injection.
A set of rings enabling the injection of material on the frameworks (crowns, bridges). The material should be veneered with composite.
Package:
- 4 casting rings (different sizes)
- Ring cover
- A stand for rings attaching the socket to the injection molding machine.
Deflex PEEK OSSIS injection granules pink color 20g Promotion
The manual is available in the DOWNLOAD section on www. mikran.pl Injection granules, pink color.
The biocompatible PEEK OSSIS injection material is ideal for:
- individual connectors
- structures of crowns and bridges (1- 2 spans)
- anatomical structures of crowns and bridges
- Maryland bridges
- telescopic crowns
- constructions of beams for overdentures
- hybrid dentures
- other implantoprosthetic works
- removable dentures.
The material can be used to work on a deflex injection molding machine and other devices operating at a temperature of 390 ° C.
PEEK OSSIS removable dentures are made in the traditional canning method (such as acetal), while permanent restorations are made using a special set of rings (adapted only to the Deflex device) and an investment material.
Package:
20 g