Prosthetics / Injection of thermoplastics

What are the biggest advantages of thermoplastic materials :?

  • no residual monomer
  • no metal parts
  • flexibility - aesthetics
  • low weight

Due to their chemical composition, thermoplastics are divided into:

  • polyamides
  • polymers, copolymers
  • PEEK
  • acetals
  • nylons

Polyamides and polymers exhibit an optimal combination of stiffness and flexibility, making them ideal for partial and full dentures. Due to high translucency and transparency, dentures made of these materials are aesthetic and look good in the oral cavity.

PEEK, lightweight, hypoallergenic material for skeletal dentures, primary and secondary telescopic crowns as well as frameworks for veneering with a composite of hardness and density similar to real bone. PEEK is currently the most biocompatible thermoplastic for use in dental prosthetics

Acetal and nylon are older thermoplastic materials with high flexibility. The biggest disadvantage of these materials is water absorption, which leads to rapid discoloration and unsightly appearance.

Product Code:: 1710
Hatho - brush 80mm white hard bristles + fleece
Hatho

31.71zł +vat

39.00zł incl tax

Hatho - brush 80mm white hard bristles + fleece

Hatho - brush 80mm white hard bristles + fleece. For thermoplastics and acrylic.

Package:

1 piece.

Product Code: 1710
Brand: Hatho
Hatho - brush 80mm white hard bristles + fleece

31.71zł +vat

39.00zł incl tax

Product Code:: 2237
Unitrim stone for thermoplastics / acetal large EVE
Deflex

37.32zł +vat

45.90zł incl tax

Unitrim stone for thermoplastics / acetal large EVE

Highly abrasive stone which, thanks to its porous structure, does not heat up the thermoplastic material during processing, reducing the risk of material deformation. Use the stone for pre-treatment - collecting material. (use 3000-5000 rpm optimally / max 20,000 rpm)

Package :

1 piece.

Product Code: 2237
Brand: Deflex
Unitrim stone for thermoplastics / acetal large EVE

37.32zł +vat

45.90zł incl tax

Product Code:: 2238
Chamois leather with pumice stone 22mm orange (1 step) EVE
Eve

7.32zł +vat

9.00zł incl tax

Chamois leather with pumice stone 22mm orange (1 step) EVE

Orange chamois soaked in pumice.

Use an orange chamois leather to smooth the surface and prepare it for gloss polishing of acrylic, acetal, nylon and all thermoplastics. Deerskin is already soaked in pumice - do not use additional pastes and preparations. (use 5,000-7,000 rpm optimally / 10,000 rpm maximum)

For the best effect, use an orange chamois and then a pink chamois - kod_mikran: 2243

package:

1 piece 22 mm / 3mm

Product Code: 2238
Brand: Eve
Chamois leather with pumice stone 22mm orange (1 step) EVE

7.32zł +vat

9.00zł incl tax

Product Code:: 2243
Chamois leather with pumice stone 22mm pink (2nd step) - EVE
Eve

7.32zł +vat

9.00zł incl tax

Chamois leather with pumice stone 22mm pink (2nd step) - EVE

Characteristic:

Pink chamois soaked in pumice.

After using an orange chamois, use a pink chamois for a high gloss finish for acrylic, acetal, nylon and other thermoplastics. Deerskin is already soaked in pumice - do not use additional pastes and preparations. (use 5,000-7,000 rpm optimally / 10,000 rpm maximum)

For best results, use an orange chamois and then a pink chamois.

Package:

1 piece 22 mm / 3mm

Product Code: 2243
Brand: Eve
Chamois leather with pumice stone 22mm pink (2nd step) - EVE

7.32zł +vat

9.00zł incl tax

Product Code:: 2325
Hatho - PoliStar pink paste 150g
Hatho

72.36zł +vat

89.00zł incl tax

Hatho - PoliStar pink paste 150g

Hatho - PoliStar pink paste 150g. For thermoplastics and acrylic.

Package:

1 piece

Product Code: 2325
Brand: Hatho
Hatho - PoliStar pink paste 150g

72.36zł +vat

89.00zł incl tax

Product Code:: 2369
Hatho - PoliStar Creme paste high gloss 90 gr
Hatho

56.91zł +vat

70.00zł incl tax

Hatho - PoliStar Creme paste high gloss 90 gr

Hatho - paste PoliStar TUBA high gloss 90 gr. For thermoplastics and acrylic.

Package:

1 piece

Product Code: 2369
Brand: Hatho
Hatho - PoliStar Creme paste high gloss 90 gr

56.91zł +vat

70.00zł incl tax

Product Code:: 3333
Hatho - soft green silicone cotton brush
Hatho

66.83zł +vat

82.20zł incl tax

Hatho - soft green silicone cotton brush

Hatho - brush soft green silicone cotton. For thermoplastics and acrylic.

Package:

1 piece

Product Code: 3333
Brand: Hatho
Hatho - soft green silicone cotton brush

66.83zł +vat

82.20zł incl tax

Product Code:: 3798
Villacryl Thermo Iso-clear light-curing insulator 30ml
Everall7

178.88zł +vat239.16zł

220.03zł incl tax

Villacryl Thermo Iso-clear light-curing insulator 30ml

Villacryl Thermo Iso-clear High temperature resistant light-curing insulator. Perfect for all types of thermoplastics.

Package:

  • 30 ml.

Product Code: 3798
Brand: Everall7
Villacryl Thermo Iso-clear light-curing insulator 30ml

178.88zł +vat239.16zł

220.03zł incl tax

Product Code:: 4119
Thermo Flexi-J Primer 10 ml
Everall7

120.37zł +vat

130.00zł incl tax

Thermo Flexi-J Primer 10 ml

Villacryl Thermo Flexi-J Primer. The primer connects thermoplastic materials based on polyamides. Useful in the case of extra injection of clamps, repairs or relining.

Package:

10ml.

Product Code: 4119
Brand: Everall7
Thermo Flexi-J Primer 10 ml

120.37zł +vat

130.00zł incl tax

Product Code:: 4891
Hatho - Lintygrey polishing paste 90gr (gray)
Hatho

23.58zł +vat

29.00zł incl tax

Hatho - Lintygrey polishing paste 90gr (gray)

Hatho - Lintygrey polishing paste 90 gr (gray). For thermoplastics and acrylic.

Package:

1 piece

Product Code: 4891
Brand: Hatho
Hatho - Lintygrey polishing paste 90gr (gray)

23.58zł +vat

29.00zł incl tax

Product Code:: 5227
Hatho - cotton shield 4x50 (100mm) muslin
Hatho

13.01zł +vat

16.00zł incl tax

Hatho - cotton shield 4x50 (100mm) muslin

Cotton disc 4x50 (100mm) muslin. For polishing thermoplastic materials and acrylic.

Package:

1 piece

Product Code: 5227
Brand: Hatho
Hatho - cotton shield 4x50 (100mm) muslin

13.01zł +vat

16.00zł incl tax

J100 Acetal and nylon injection molding machine automatic. J-100 Evolution + starter kit + course

J-100 EVOLUTION - Automatic injection molding machine for thermoplastics

Mikran.pl presents the most modern injection system for thermoplastics, Pressing Dental. J100 Evolution is one of the few open systems that allows the use of many different thermoplastic materials in one device!

Features:

  • A MICROPROCESSOR CONTROLLING THE COURSE OF THE TECHNOLOGICAL PROCESS
  • 30 CONTROL PROGRAMS WITH THE POSSIBILITY OF MAKING YOUR OWN CHANGES
  • INDIVIDUALLY PREPARED INJECTION CARTRIDGES ACCORDING TO YOUR NEEDS (LARGE MATERIAL SAVINGS)
  • THE POSSIBILITY OF VIEWING FACTORY PROGRAMS, ALSO WHILE THE DEVICE IS OPERATING
  • LIQUID CRYSTAL SCREEN
  • ELECTRONIC RELAYS (no sparking and no wear in conditions of high humidity)
  • HIGH PERFORMANCE HYDRAULIC CHAMBER - NO INJECTION PROBLEMS
  • LOW WORKING PRESSURE - PLASTER MOLDS, CLASS III HARDNESS
  • ELECTRONIC PRESSURE MEASUREMENT
  • ADDITIONAL VENTILATION - TO COOL THE CAN
  • HEATING THE CAN BEFORE INJECTION AND DURING THE MATERIAL CONDENSATION PROCEDURE

  • European CE certificate

  • warranty and post-warranty service
  • technological support and consultation in our education center for dentists and dental technicians
  • training in the field of Pressing technology
  • courses for dentists cooperating with a prosthetic laboratory equipped with a system in the area of the laboratory.
  • permanent discount on Pressing Dental materials

SIMPLE AND SAFE WORK !!!

  • Full temperature control
  • Full control of process times
  • Acoustic and optical information signals
  • Pre-injection alarm can be programmed
  • Disposable cartridges applied to the cold core
  • The hot cartridge is in the device during the process - no contact with hot elements
  • If the correct procedures are exceeded, the device switches off the program

WITH THE PURCHASE OF THE J100 DEVICE, TRAINING AND MATERIALS STARTER KIT FOR FREE!

Thermoplastic materials for injection molding machine. Starter kit includes:

  • Silicone insulator, code: 00050,
  • Polishing paste for acetal and acrylic, code: 00060,
  • Acetal assortment (1150g + shade guide), code: 00550,
  • Gyplux 30ml (photopolymerizing insulator for gypsum models), code: 00090,
  • Marble Stone 3kg, code: 00084E,
  • Big box type 100, code: 00020,
  • Can type 50 double, code: 00030,
  • Rollers (60 pieces +60 caps), code: 00040.

Package:

Injection molding machine + promotional kit

Product Code: 7698
J100 Acetal and nylon injection molding machine automatic. J-100 Evolution + starter kit + course

13,414.63zł +vat

16,499.99zł incl tax

Gypsum Marble Stone Evolution 3kg - expansion gypsum for injection molding machines

Characteristic:

Special double expansion plaster for duplicating models, white color. It does not require the use of a special liquid, mixed with demineralized water. Dedicated to work with devices that inject thermoplastic materials.

Package:

3 kg bucket

Product Code: 8029
Gypsum Marble Stone Evolution 3kg - expansion gypsum for injection molding machines

193.51zł +vat

238.02zł incl tax

Product Code:: 8030
Gyplux insulator
Pressing Dental

212.14zł +vat269.00zł

260.93zł incl tax

Gyplux insulator

Characteristic:

The varnish used on the duplicated plaster model provides a perfectly smooth and shiny mucosal surface in acetal, nylon and other thermoplastic dentures. (note gyplux polymerizes under the influence of UV light)

Package:

30ml

Product Code: 8030
Gyplux insulator

212.14zł +vat269.00zł

260.93zł incl tax

Product Code:: 8031
Acetal Dental 500 g
Pressing Dental

327.78zł +vat

354.00zł incl tax

Acetal Dental 500 g

ACETAL DENTAL - is a non-toxic material and does not cause allergies.

It is a suitable replacement for acrylic resin and metal in many prosthetic works.

Acetal application:

  • aesthetic buckles for dentures, the so-called skeletal,

  • partial dentures,

  • bridges and bridges for telescopes,

  • prosthetic elements on implants,

  • bite and stabilizing splints,

  • retention elements on the beams which are also reinforcement.

Injection temperature - 220 degrees C Material melting time - 20 minutes Injection and heating - 2-3 minutes Cooling time under constant pressure - 20-40 minutes Working pressure - 4.0 Bars

Package:

500 g

Product Code: 8031
Acetal Dental 500 g

327.78zł +vat

354.00zł incl tax

Product Code:: 8032
Acetal - J100 type polymerization can
Pressing Dental

446.34zł +vat

549.00zł incl tax

Acetal - J100 type polymerization can

Universal box for standard works.

Package:

1 piece.

Product Code: 8032
Acetal - J100 type polymerization can

446.34zł +vat

549.00zł incl tax

Product Code:: 8033
Metal cork for nylon
Pressing Dental

37.40zł +vat

46.00zł incl tax

Metal cork for nylon

Injection cartridge closing plug with nylon material prevents material from flowing into the device.

Package:

1 piece.

Product Code: 8033
Metal cork for nylon

37.40zł +vat

46.00zł incl tax

Product Code:: 8034
Acetal - aluminum rollers with J100 plugs - 22mm
Pressing Dental

6.63zł +vat8.40zł

8.15zł incl tax

Acetal - aluminum rollers with J100 plugs - 22mm

Acetal aluminum rollers with plugs for J100 injection molding machine. - 22 mm.

Package:

1 pc roller + 1 cork

Product Code: 8034
Acetal - aluminum rollers with J100 plugs - 22mm

6.63zł +vat8.40zł

8.15zł incl tax

Product Code:: 8035
Acetal - Silicone Insulator - Tube Lubricant
Pressing Dental

85.37zł +vat

105.01zł incl tax

Acetal - Silicone Insulator - Tube Lubricant

Characteristic:

Silicone insulator for high temperature work. Only for devices: ACTIO, J-100, J-200

Package:

50 ml

Product Code: 8035
Acetal - Silicone Insulator - Tube Lubricant

85.37zł +vat

105.01zł incl tax

Product Code:: 8036
Polishing paste for acetal and acrylic
Pressing Dental

59.35zł +vat

73.00zł incl tax

Polishing paste for acetal and acrylic

Universal polishing paste for acetal and acrylic,

Package:

50 ml

Product Code: 8036
Polishing paste for acetal and acrylic

59.35zł +vat

73.00zł incl tax

Product Code:: 8037
FJP Thermoplastic Resin
Pressing Dental

462.04zł +vat

499.00zł incl tax

FJP Thermoplastic Resin

The new thermoplastic resin is an alternative to commonly used materials from the group of polyamides or "nylons" such as: "Valplast", "Flexite", "Flexi J". Dental prostheses made of these materials are famous for their high aesthetics and recognition among patients who use such prostheses. Traditional polyamides, apart from their undoubted advantages, also have disadvantages that make it difficult to process and keep clean dentures made of them. Many years of research into the improvement of nylon materials have led to the creation of a new material devoid of these drawbacks.

Pressing Dental, FJP material has the following features:

  • It is slightly flexible, making it very easy to process, using traditional methods and tools. Reduced flexibility has a positive effect on the prosthetic base, does not cause trauma associated with the use of a flexible denture.
  • it is translucent, thanks to which it perfectly blends with the patient's mucosa, making the used prosthesis imperceptible in the mouth.
  • Contrary to traditional nylons, it almost does not absorb water (only 1/3 of traditional nylon), which significantly extends the life of dentures.
  • It has very good color stability, it does not discolor during use.
  • Precision ensures very good adhesion to the substrate.
  • It does not deform.
  • It can be sterilized at 120 degrees Celsius.
  • It does not create air bubbles even with very thin elements.
  • It does not need to be drained before injection.
  • It is easy to process and can be polished well.
  • Bonds chemically with acrylic using glue.
  • It can be repaired and made corrections.
  • Once remelted, it can be injected a second time (40-50% should be added to the new material) without losing its mechanical and physical properties.

Package:

250 g.

Product Code: 8037
FJP Thermoplastic Resin

462.04zł +vat

499.00zł incl tax

Product Code:: 8615
MaxiFresh cleaning tablets 24 pcs.
Deflex

30.74zł +vat42.00zł

37.80zł incl tax

MaxiFresh cleaning tablets 24 pcs.

MaxiFresh cleaning tablets

For professional and home cleaning and care of bleaching splints, retainers, relaxation splints, bruxism splints and sports splints. Perfect for cleaning all thermoplastic materials and trainers.

Benefits:

  • It reduces discoloration
  • Refreshes the surface and eliminates unpleasant odors
  • Saves material as it does not contain abrasives
  • Increased service life of the tooth rail with daily cleaning.

Use:

  • Place the Maxi-Fresh cleaning tablet in a vessel filled with 150 ml of water at approx. 37C.
  • (Colder water may take longer to dissolve the tablet).
  • After the tablet has completely dissolved, place the rail in the vessel for a minimum of 45 minutes.
  • After the cleaning process is complete, rinse the rail under running water and dry the surface.

Package:

  • 24 pcs.

Product Code: 8615
Brand: Deflex
MaxiFresh cleaning tablets 24 pcs.

30.74zł +vat42.00zł

37.80zł incl tax

Product Code:: 9251
Acetal - Teflon plugs
Pressing Dental

2.03zł +vat

2.50zł incl tax

Acetal - Teflon plugs

Teflon plugs.

Package:

60 pieces

Product Code: 9251
Acetal - Teflon plugs

2.03zł +vat

2.50zł incl tax

Product Code:: 9252
Acetal - FJP polishing paste
Pressing Dental

84.26zł +vat

91.00zł incl tax

Acetal - FJP polishing paste

Polishing paste for nylon.

Package:

50 ml.

Product Code: 9252
Acetal - FJP polishing paste

84.26zł +vat

91.00zł incl tax

Product Code:: 9253
Acetal - J100 rollers
Pressing Dental

5.84zł +vat7.40zł

7.18zł incl tax

Acetal - J100 rollers

Acetal rolls for injection molding machine J-100 without plugs.

Package:

1 piece.

Product Code: 9253
Acetal - J100 rollers

5.84zł +vat7.40zł

7.18zł incl tax

Product Code:: 9289
Corflex - polishing liquid
Pressing Dental

78.70zł +vat

85.00zł incl tax

Corflex - polishing liquid

Aromatic liquid for polishing rails and protectors made of CORFLEX and other thermoplastics and acrylic. Apply a small amount of the aromatic liquid to the work surface, before handing it over to the patient. It gives a pleasant mint flavor and aroma and adds shine.

Package:

30 ml.

Product Code: 9289
Corflex - polishing liquid

78.70zł +vat

85.00zł incl tax

Product Code:: 9485
Thermo Bridge Pink 200g
Pressing Dental

148.20zł +vat165.00zł

160.05zł incl tax

Thermo Bridge Pink 200g

Thermo Bridge pink color. Acrylic resin free from monomer for injection under pressure.

Application:

  • removable dentures
  • partial dentures
  • complete dentures.

Package:

200g

Product Code: 9485
Thermo Bridge Pink 200g

148.20zł +vat165.00zł

160.05zł incl tax

Product Code:: 9739
Deflex material shade guide
Deflex

47.97zł +vat

59.00zł incl tax

Deflex material shade guide

Deflex material shade guide

Package:

1 piece

Product Code: 9739
Brand: Deflex
Deflex material shade guide

47.97zł +vat

59.00zł incl tax

Product Code:: 9759
Acetal Acecril acetal / acrylic glue
Pressing Dental

269.45zł +vat300.00zł

291.00zł incl tax

Acetal Acecril acetal / acrylic glue

Adhesive providing a chemical bond between acetal and acrylic. Strengthens and improves the maintenance of acrylic saddles in acetal skeletal dentures. It prevents the acrylic from peeling off (sticking out) from the acetal surface and the accumulation of food debris in the denture.

Package:

1 piece

Product Code: 9759
Acetal Acecril acetal / acrylic glue

269.45zł +vat300.00zł

291.00zł incl tax

Product Code:: 10041
Acetal-can type 200
Pressing Dental

620.41zł +vat

763.10zł incl tax

Acetal-can type 200

Acetal type 200 can Injection and polymerization of all acrylic resins

Thanks to the 200-type can, two dentures can be made and polymerized simultaneously in record time in just 30 minutes

Package:

1 piece.

Product Code: 10041
Acetal-can type 200

620.41zł +vat

763.10zł incl tax

Product Code:: 10715
Villacryl Thermo Press 250g
Everall7

407.41zł +vat

440.00zł incl tax

Villacryl Thermo Press 250g

The highest quality microcrystalline material based on polyamide ensures a perfect fit of the dentures, color stability and easy processing guaranteeing a perfectly smooth and shiny surface of the prosthesis.

Villacryl Thermo Press is dedicated to all removable dentures, such as:

  • complete dentures,

  • partial dentures,

  • microprostheses,

  • retention elements in skeletal dentures,

  • relaxation splints,

  • space keepers.

Available in 4 colors:

  • T2 milky pink

  • T3 dark pink

  • T4 pink

  • 0 transparent

Package:

  • 250 g

Product Code: 10715
Brand: Everall7
Villacryl Thermo Press 250g

407.41zł +vat

440.00zł incl tax

Product Code:: 10945
Luvac 8ml
Roko

76.42zł +vat

94.00zł incl tax

Luvac 8ml

LUVAC - UV varnish - light cured.

Package:

8 ml

Product Code: 10945
Brand: Roko
Luvac 8ml

76.42zł +vat

94.00zł incl tax

Product Code:: 11159
Silicone spray for injection molding machines
Deflex

80.00zł +vat

98.40zł incl tax

Silicone spray for injection molding machines

Silicone spray to lubricate the cartridge prior to insertion into the injection molding machine. Reduces friction during injection.

Packaging: 400 ml

Product Code: 11159
Brand: Deflex
Silicone spray for injection molding machines

80.00zł +vat

98.40zł incl tax

Product Code:: 11632
Deflex - M10 XR - L 32.6g diameter 22mm - complete dentures + large partial
Deflex

50.93zł +vat

55.00zł incl tax

Deflex - M10 XR - L 32.6g diameter 22mm - complete dentures + large partial

Modern polymer-based thermoplastic material for universal use. Flexible with increased hardness compared to other thermoplastic materials. Low contraction (0.6%) guarantees a good fit of the denture. It is chemically combined with traditional "cold" acrylic, so that the material can be repaired and relined in a traditional way.

Application:

  • Complete dentures,
  • partial dentures with supports,
  • overdenture dentures,
  • partial dentures on clasps

The colors of the Deflex materials are a combination of translucency and shades of pink which enable the effect of "adaptation" of the prosthesis to the natural color of the patient's teeth and gums. These effects only become visible when you place the work in your mouth.

Features:

  • Does not contain residual monomer. Very easy to polish to "high gloss".
  • Thanks to its stiffness and fracture resistance, it allows you to perform work of reduced thickness with delicate pelottes.
  • The absorption index at the level of 0.3% guarantees long-term use of the prosthesis without affecting its aesthetics
  • All Deflex cartridges are packed in a way that guarantees proper behavior of the material during injection and processing. Before thermoplastic materials are subjected to thermal processes, they are sensitive to moisture, therefore Deflex tubes, apart from plastic protective packaging, also contain a preparation that protects the material against excess moisture.

Available in colors:

  • Banner
  • Soft Pink - slightly veined pink transparent
  • Medium Pink - veined pink
  • Intense Pink - veined intense pink (opaque for working on frameworks)

Package:

tube 32.6 g

Product Code: 11632
Brand: Deflex
Deflex - M10 XR - L 32.6g diameter 22mm - complete dentures + large partial

50.93zł +vat

55.00zł incl tax

Product Code:: 11779
Deflex box - for the MAD1300 injection molding machine
Deflex

365.85zł +vat

450.00zł incl tax

Deflex box - for the MAD1300 injection molding machine

Can for injection of thermoplastic materials - compatible with the Deflex MAD1300 injection molding machine. Durable and solid construction.

Package:

1 piece

Product Code: 11779
Brand: Deflex
Deflex box - for the MAD1300 injection molding machine

365.85zł +vat

450.00zł incl tax

Product Code:: 11780
* Deflex - MAD 1300 injection molding machine
Deflex

11,300.81zł +vat

13,900.00zł incl tax

* Deflex - MAD 1300 injection molding machine

Characteristic:

The MAD1300 injection molding machine from Deflex is the newest injection molding machine for thermoplastic dentures. The fully open device (any material available on the market can be used in it) has an innovative super-strong pneumatic piston that allows for injection of even the most demanding materials. The Deflex company has been specializing in the production of materials and devices related to dental technology for 15 years. Thanks to the accumulated experience, the MAD1300 injection molding machine is the best adapted device available on the market: it is characterized by easy operation, failure-free operation and efficient use of compressed air - thanks to which, even with the use of a small amount of compressed air, we obtain a high injection force.

Deflex MAD1300 injection molding machine is:

  • maximum time savings
  • fully automatic
  • pre-defined and empty programs
  • easy to install and use
  • "open" system - possibility to use all materials available on the market
  • user-friendly controls
  • safe operation (in accordance with EU standards)
  • can cover
  • piston blockage sensor
  • connection to the compressor
  • can heating function

Parameters:

  • Dimensions: 65 cm x 15 cm x 30 cm
  • Weight: 21 kg
  • Voltage: 220V
  • Piston diameter: 22mm or 25mm
  • Max. working temperature: 390 ° C
  • Max. operating pressure: 10 bar

The Deflex company, apart from the MAD 1300 injection molding machine, has a commercial offer

thermoplastic materials (M 10 XR, Classic, Acrilato). Their physical and chemical properties allow to eliminate in the works:

  • metal retention elements
  • they give the possibility of partial and complete works
  • Deflex materials are 100% natural origin
  • completely free of harmful residual monomer

Patient satisfaction:

  • no unsightly metal retention elements
  • Deflex materials are 100% natural origin
  • completely free of harmful residual monomer

Time saving:

  • dentures are easy to work with and high-gloss polishing
  • we make the prosthesis up to 30% faster than with traditional techniques

Comfort of use:

  • Low absorption makes it easier to keep the dentures clean.
  • Dentures made of Deflex materials are up to 60% lighter than traditional skeletal dentures.
  • Performing restorations with thickness reduced by up to 50% - they do not interfere with speech
  • Flexible retention elements with "shape memory" guarantee a stable fixation of the prosthesis

The starter kit includes:

  • Deflex MAD1300 injection molding machine
  • Deflex can
  • EVE processing kit
  • HATHO high gloss polishing set
  • 20 material cartridges (selectable)
  • 500g of acetal
  • Maxi Fresh tablets for cleaning dentures
  • 2 phantom models
  • 200 leaflets for patients
  • wax channels 0.6 X15cm (20 pcs.)

By investing in the Deflex system, apart from a solid and modern device for stamping thermoplastic materials, you receive marketing support in the form of phantoms and leaflets for patients, thanks to which you will attract potential customers to your new product.

Product Code: 11780
Brand: Deflex
* Deflex - MAD 1300 injection molding machine

11,300.81zł +vat

13,900.00zł incl tax

Product Code:: 11781
Deflex - Classic L - 32.6g diameter 22mm - complete dentures + large partial
Deflex

45.37zł +vat

49.00zł incl tax

Deflex - Classic L - 32.6g diameter 22mm - complete dentures + large partial

Semi-hard polyamide for thermal injection.

Application:

All partial dentures.

Features:

Natural polyamide is perfect for all types of removable partial restorations, even with thin clamps. Compared to traditional "soft nylons", the material is distinguished by high hardness while maintaining adequate flexibility in the retention areas where it is necessary for the proper functioning of the restoration. Reduced fluid absorption makes it easier to maintain hygiene in the denture. It does not cause allergies.

Available in colors:

  • Banner
  • Soft Pink - slightly veined pink transparent
  • Intense pink - intensely pink veined

Packed in a tube protecting against harmful external factors (moisture, sunlight).

Package:

Tube: 32.6 g

Product Code: 11781
Brand: Deflex
Deflex - Classic L - 32.6g diameter 22mm - complete dentures + large partial

45.37zł +vat

49.00zł incl tax

Product Code:: 11782
Deflex - Classic M - 23.2g, diameter 22mm - partial dentures
Deflex

41.67zł +vat

45.00zł incl tax

Deflex - Classic M - 23.2g, diameter 22mm - partial dentures

Characteristic:

Semi-hard polyamide for thermal injection.

Application:

All partial dentures.

Features:

Natural polyamide is perfect for all types of removable partial restorations, even with thin clamps. Compared to traditional "soft nylons", the material is distinguished by high hardness while maintaining adequate flexibility in the retention areas where it is necessary for the proper functioning of the restoration. Reduced fluid absorption makes it easier to maintain hygiene in the denture. It does not cause allergies.

Available in colors:

  • Banner
  • Soft Pink - slightly veined pink transparent
  • Intense pink - intensely pink veined

Packed in a tube protecting against harmful external factors (moisture, sunlight).

Package:

Tube: 23.2g

Product Code: 11782
Brand: Deflex
Deflex - Classic M - 23.2g, diameter 22mm - partial dentures

41.67zł +vat

45.00zł incl tax

Product Code:: 11783
Deflex - Classic S - 14.9g, diameter 22mm - repairs - touching the buckle
Deflex

36.11zł +vat

39.00zł incl tax

Deflex - Classic S - 14.9g, diameter 22mm - repairs - touching the buckle

Characteristic:

Semi-hard polyamide for thermal injection.

Application:

All partial dentures.

Features:

Natural polyamide is perfect for all types of removable partial restorations, even with thin clamps. Compared to traditional "soft nylons", the material is distinguished by high hardness while maintaining adequate flexibility in the retention areas where it is necessary for the proper functioning of the restoration. Reduced fluid absorption makes it easier to maintain hygiene in the denture. It does not cause allergies.

Available in colors:

  • Banner
  • Soft Pink - slightly veined pink transparent
  • Intense pink - intensely pink veined

Packed in a tube protecting against harmful external factors (moisture, sunlight).

Package:

Tube: 14.9g

Product Code: 11783
Brand: Deflex
Deflex - Classic S - 14.9g, diameter 22mm - repairs - touching the buckle

36.11zł +vat

39.00zł incl tax

Product Code:: 11785
Deflex - M10 XR - M 23.2g diameter 22mm - partial dentures
Deflex

41.67zł +vat

45.00zł incl tax

Deflex - M10 XR - M 23.2g diameter 22mm - partial dentures

Characteristic:

Modern polymer-based thermoplastic material for universal use. Flexible with increased hardness compared to other thermoplastic materials. Low contraction (0.6%) guarantees a good fit of the denture. It is chemically combined with traditional "cold" acrylic, so that the material can be repaired and relined in a traditional way.

Application:

Complete dentures, partial dentures with supports, overdentures, partial dentures with latches

The colors of the Deflex materials are a combination of translucency and shades of pink which enable the effect of "adaptation" of the prosthesis to the natural color of the patient's teeth and gums. These effects only become visible when you place the work in your mouth.

Features:

Does not contain residual monomer. Very easy to polish to "high gloss". Thanks to its stiffness and fracture resistance, it allows you to perform work of reduced thickness with delicate pelottes. The absorption index at the level of 0.3% guarantees many years of use of the prosthesis without affecting its aesthetics. All Deflex cartridges are packed in a way that guarantees the proper behavior of the material during injection and processing. Before thermoplastic materials are subjected to thermal processes, they are sensitive to moisture, therefore Deflex tubes, apart from plastic protective packaging, also contain a preparation that protects the material against excess moisture.

Available in colors:

  • Banner
  • Soft Pink - slightly veined pink transparent
  • Medium Pink - veined pink
  • Intense Pink - veined intense pink (opaque for working on frameworks)

Package:

Tube: 23.2 g

Product Code: 11785
Brand: Deflex
Deflex - M10 XR - M 23.2g diameter 22mm - partial dentures

41.67zł +vat

45.00zł incl tax

Product Code:: 11787
Deflex - M10 XR - S 14.9g diameter 22mm - repairs - touching the buckle
Deflex

36.11zł +vat

39.00zł incl tax

Deflex - M10 XR - S 14.9g diameter 22mm - repairs - touching the buckle

Characteristic:

Modern polymer-based thermoplastic material for universal use. Flexible with increased hardness compared to other thermoplastic materials. Low contraction (0.6%) guarantees a good fit of the denture. It is chemically combined with traditional "cold" acrylic, so that the material can be repaired and relined in a traditional way.

Application:

Complete dentures, partial dentures with supports, overdentures, partial dentures with latches

The colors of the Deflex materials are a combination of translucency and shades of pink which enable the effect of "adaptation" of the prosthesis to the natural color of the patient's teeth and gums. These effects only become visible when you place the work in your mouth.

Features:

  • Does not contain residual monomer. Very easy to polish to "high gloss".
  • Thanks to its stiffness and fracture resistance, it allows you to perform work of reduced thickness with delicate pelottes.
  • The absorption index at the level of 0.3% guarantees long-term use of the prosthesis without affecting its aesthetics

All Deflex cartridges are packed in a way that guarantees proper behavior of the material during injection and processing. Before thermoplastic materials are subjected to thermal processes, they are sensitive to moisture, therefore Deflex tubes, apart from plastic protective packaging, also contain a preparation that protects the material against excess moisture.

Available in colors:

  • Banner
  • Soft Pink - slightly veined pink transparent
  • Medium Pink - veined pink
  • Intense Pink - veined intense pink (opaque for working on frameworks)

Package:

tube 14.9 g

Product Code: 11787
Brand: Deflex
Deflex - M10 XR - S 14.9g diameter 22mm - repairs - touching the buckle

36.11zł +vat

39.00zł incl tax

Product Code:: 11788
Acrilato - injection acrylic without residual monomer - cartridge 32.6 g
Deflex

45.37zł +vat

49.00zł incl tax

Acrilato - injection acrylic without residual monomer - cartridge 32.6 g

Application:

Complete dentures

Features:

Prostheses made of Acrilato fd material are more resistant to mechanical damage and lighter than those made of conventional acrylic.

  • They are completely devoid of residual monomer.
  • The contraction during polymerization at the level of 0.3% guarantees a perfect fit of the denture in the patient's mouth.
  • The material is chemically bonded with traditional "cold" acrylics, which allows for its repair or relining in a simple and quick way.

It does not cause allergies.

Package:

Tube: 32.6g

Product Code: 11788
Brand: Deflex
Acrilato - injection acrylic without residual monomer - cartridge 32.6 g

45.37zł +vat

49.00zł incl tax

Product Code:: 11795
Deflex - wax channels 6mm 20 pcs / pack
Deflex

44.72zł +vat

55.01zł incl tax

Deflex - wax channels 6mm 20 pcs / pack

6mm wax channels.

Package:

  • 20 pcs

Product Code: 11795
Brand: Deflex
Deflex - wax channels 6mm 20 pcs / pack

44.72zł +vat

55.01zł incl tax

Product Code:: 11802
Tubes 22mm with a cap
Vertex-Dental B.V.

3.90zł +vat

4.80zł incl tax

Tubes 22mm with a cap

Empty tubes with a cap for injection of thermoplastic materials.

Data:

  • Diameter 22mm.

  • Size M and L

Package:

  • 1pc tube

  • 1pc cap

Product Code: 11802
Tubes 22mm with a cap

3.90zł +vat

4.80zł incl tax

Product Code:: 11814
* Set for polishing thermoplastic materials EVE - PROMOTION
Eve

74.80zł +vat

92.00zł incl tax

* Set for polishing thermoplastic materials EVE - PROMOTION

A complete kit needed for processing and polishing thermoplastic materials (polymers) to a high gloss. Also recommended for edging and polishing traditional acrylic.

Includes:

Step 1:

  • Unitrimm Stone - 1x Highly abrasive stone which, thanks to its porous structure, does not heat the thermoplastic material during processing, reducing the risk of deformation of the material. Use the stone for pre-treatment - collecting material. (use 3000-5000 rpm optimally / max 20,000 rpm)

Step 2:

  • Silicone rubber bands - 3x Classic silicone rubber bands prepare the surface of the thermoplastic material for further polishing. They smooth the surface. (use 5,000-7,000 rpm optimally / 15,000 rpm maximum)

Step 3:

  • Orange chamois soaked in pumice - 1x Use an orange chamois leather to smooth the surface and prepare for gloss polishing. Deerskin is already soaked in pumice - do not use additional pastes and preparations. (use 5,000-7,000 rpm optimally / 10,000 rpm maximum)

Step 4:

  • Pink chamois soaked with pumice - 1x After using an orange chamois, use a pink chamois for a high gloss. Deerskin is already soaked in pumice - do not use additional pastes and preparations. The shining properties of the pumice stone and the delicate structure of the fabric give the thermoplastic material a high gloss, even after a short treatment. (use 5,000-7,000 rpm optimally / 10,000 rpm maximum)

Package:

1 set

Product Code: 11814
Brand: Eve
* Set for polishing thermoplastic materials EVE - PROMOTION

74.80zł +vat

92.00zł incl tax

Product Code:: 11852
Unitrim stone for thermoplastics / acetal small
Deflex

33.33zł +vat

41.00zł incl tax

Unitrim stone for thermoplastics / acetal small

Characteristic:

Highly abrasive stone which, thanks to its porous structure, does not heat up the thermoplastic material during processing, reducing the risk of material deformation. Use the stone for pre-treatment - collecting material. (use 3000-5000 rpm optimally / max 20,000 rpm)

Package :

1 piece.

Product Code: 11852
Brand: Deflex
Unitrim stone for thermoplastics / acetal small

33.33zł +vat

41.00zł incl tax

Product Code:: 12169
Hatho- polishing set for thermoplastics Promotion
Hatho

262.60zł +vat

323.00zł incl tax

Hatho- polishing set for thermoplastics Promotion

HATHO has created a set for polishing in thermoplastics. It is a three-step process, the polishing result is much faster compared to the existing methods. The HATHO ThermoPol Set products allow you to easily polish your thermoplastic dentures to a high gloss.

The polishing set for thermoplastics is divided into three stages:

  1. Initial polishing. Attach a brush 80 mm white hard bristles + scotch brite (catalog no. 4280) on the polisher and set the speed to 1800 rpm. Use gray paste (item no. 313168) and rub it on the brush for 2 seconds. Polish the selected surface for about 3-4 minutes until smooth.

  2. Cleaning, polishing to a shine. Attach a 14 layer soft silicone cotton polishing brush (cat. No. 869 100/14) to the polisher and set the speed to 1800 rpm. Apply the appropriate amount of cream (catalog number 313200) recommended 0.5 on the denture. Polish for approximately 3-4 minutes until smooth for final polishing.

  3. Polishing to the final mirror shine. Attach an impregnated muslin cotton pad (Cat. No. 868 4 "x 50 H) to the polisher and set the speed to 1800 rpm. Use the finest pink paste (Cat. No. 313196) and rub on the cotton pad for 2 seconds. Lightly and gently polish for about 3-4 minutes until the final mirror shine is achieved on the surface of the denture.

The kit includes the following products

  • Brushes 80 mm, white hard bristles + abrasive scotch brite. Mounted on a plastic hub that allows you to work wet and dry. Two rows of bristles separated by a layer of scotch brite. Designed to work at max. revolutions 3,500 rpm. Professional denture brush for acrylic (PMMA), thermoplastic (nylon), 3D (acrylic prototyping), light-curing materials. No. catalog 4280.

  • PoliStar polishing paste. Top-quality, professional polishing paste by PoliStar / Hatho. The consistency of the paste allows you to work perfectly with it on rotary polishing tools. Paste intended for polishing acrylic dentures (PMMA), thermoplastic (nylon), light-cured materials. No. catalog 313168 (90g).

  • A soft polishing brush made of 14 fine layers of silicone cotton mounted on plastic. Designed to work at max. revolutions 3,500 rpm. For polishing acrylic (PMMA), thermoplastic (nylon) dentures, light-curing materials, titanium, precious and non-precious metal alloys. No. catalog number 869 100/14.

  • HATHO PoliStar cream is the highest-quality cream filled with fine-grained grits that gives a high gloss. For polishing acrylic (PMMA), thermoplastic (nylon), 3D dentures in acrylic, light-curing materials and precious metal alloys. Free of surfactants and solvents. No. catalog 313200. - Cotton disc 4x50 (100mm). Top-quality HATHO muslin polishing wheel. Designed to work at max. revolutions 3,500 rpm. Used for high gloss polishing of acrylic (PMMA), thermoplastic (nylon) dentures, 3D in acrylic, light-curing materials, chrome, cobalt, titanium, stainless steel, aluminum and other non-precious alloys. No. catalog 868 4 "x 50 H.

  • Professional pink polishing paste for polishing to the final shine with the finest grain, intended for acrylic (PMMA), thermoplastic (nylon) dentures, 3D in acrylic, light-curing materials. No. catalog 313196.

Product Code: 12169
Brand: Hatho
Hatho- polishing set for thermoplastics Promotion

262.60zł +vat

323.00zł incl tax

Product Code:: 13414
Deflex Acetal 100g (8 cubes)
Deflex

53.70zł +vat

58.00zł incl tax

Deflex Acetal 100g (8 cubes)

Deflex Acetal - is a non-toxic material and does not cause allergies.

It is a suitable replacement for acrylic resin and metal in many prosthetic works. Possible to work without expansion plaster.

Acetal application:

  • aesthetic buckles for dentures, the so-called skeletal,
  • partial dentures,
  • bridges and bridges for telescopes,
  • prosthetic elements on implants,
  • bite and stabilizing splints,
  • retention elements on the beams which are also reinforcement.

Injection temperature - 245 degrees C (+/- 5C) Material melting time - 15min Injection and heating - 30-60 seconds Cooling time under constant pressure - 30 minutes Working pressure - 5.0-7.0 Bar

Package:

8 cubes, min 100g.

Product Code: 13414
Brand: Deflex
Deflex Acetal 100g (8 cubes)

53.70zł +vat

58.00zł incl tax

Product Code:: 14306
Valplast Tube 22mm L
Valplast International Corp

40.74zł +vat

44.00zł incl tax

Valplast Tube 22mm L

Valplast Popular nylon-based flexible thermoplastic material for the fabrication of partial dentures without metal staples.

Attention:

  • should be injected into a cold can

Technical data:

  • Heating time / temperature: 10 minutes at 235C
  • Setting time (holding the piston): 10 minutes (under the compression of the piston)
  • It is not recommended to accelerate cooling with cold water (shrinkage), we cool the can in a natural way.
  • Pressure: 6-8 Bar

Package:

Tube L 1 pc.

Product Code: 14306
Valplast Tube 22mm L

40.74zł +vat

44.00zł incl tax

Product Code:: 14307
Valplast Tuba 25mm L
Valplast International Corp

40.74zł +vat

44.00zł incl tax

Valplast Tuba 25mm L

Valplast Popular nylon-based flexible thermoplastic material for the fabrication of partial dentures without metal staples.

Attention:

  • should be injected into a cold can

Technical data:

  • Heating time / temperature: 10 minutes at 235C
  • Setting time (holding the piston): 10 minutes (under the compression of the piston)
  • It is not recommended to accelerate cooling with cold water (shrinkage), we cool the can in a natural way.
  • Pressure: 6-8 Bar

Package:

Tube 25mm L - 1 pc.

Product Code: 14307
Valplast Tuba 25mm L

40.74zł +vat

44.00zł incl tax

Showing 1 to 50 of 61 (2 Pages)