Product Code: 4018
Qty: Only on request
SIRIO InFire S Ring Preheating Furnace
Sirio

1,367.91€ +vat

1,682.53€ incl tax

SIRIO InFire S Ring Preheating Furnace

  • Electronically controlled furnace for annealing rings.

  • 20 heating programs:

  • 15 for traditional annealing

  • 5 "fast" - putting the ring into a hot oven

In each program we can control 3 parameters:

  • temperature
  • temperature increase
  • temperature maintenance time

  • Delayed start function up to 100 hours.

  • The oven will hold 9 rings in the traditional size "3" or 2 rings in the size "9"

parameters:

  • voltage 230V
  • power 1500W
  • temp. max. 1100°C
  • external dimensions 32 (L) x 40 (P) x 47 (H) cm
  • chamber dimensions 16 (L) x 16 (P) x 10 (H) cm
  • weight 28 kg
  • 12 months warranty

Packaging:

  • 1 piece

Product Code: 4018
Brands Sirio
SIRIO InFire S Ring Preheating Furnace

1,367.91€ +vat

1,682.53€ incl tax

Product Code: 4906
Qty: Only on request
Laboratory oven Lift 3.0 KXP4 (P,S,R version)
Neoterm

1,260.92€ +vat

1,550.93€ incl tax

Laboratory oven Lift 3.0 KXP4 (P,S,R version)

  • The stove is distinguished by a number of innovative design solutions that make work pleasant and the stove reliable.
  • The furnace uses high-quality refractory insulation materials and a reliable corundum heating unit with built-in heaters.
  • The furnace is designed for laboratory work requiring precise temperature measurement, including heating, ashing, melting, burning off impurities, heating casting molds in prosthetic laboratories, etc.

The LIFT 3.0 stove has:

  • Heating chamber capacity 3 dm3.
  • Stainless steel housing, double ventilated, ensuring low temperature of the outer surface.
  • Heating unit with built-in heaters of exceptionally high reliability.
  • The interior of the chamber and the heaters are resistant to mechanical damage,
  • The door lifts up to protect the user from heat radiating from them and burns by touch.
  • Door switch disconnecting the power supply to the heaters.
  • Sheathed, closed thermocouple with increased durability and low time constant.
  • Thermal insulation made of fibrous refractory materials.
  • Fireplace for connecting the extractor.
  • Thermoregulator placed under the stove.
  • Large chamber in relation to external dimensions.
  • Small furnace weight.
  • Optionally, the furnace can be equipped with a catalyst.

KXP4 thermoregulator:

  • The KXP4 is a programmable microprocessor controller with a backlit alphanumeric display, sound signaling and a Bluetooth modem that enables recording and visualization of the process on a computer in real time.

The KXP4 is available in three versions:

  • [P]basic - 1 program, 1 stage
  • [S]standard 3 programs max. 3-stage, stages 2 and 3 can have a programmed cooling rate instead of heating, adjustable delay of switching on the furnace operation up to 9 days.
  • [R]extended 9 programs max. 5-stage, stages 2, 3, 4 and 5 can have a programmed cooling rate instead of heating, adjustable delay of switching on the furnace operation up to 9 days.

Each version has:

  • stages with programmable heating rate and stop time,
  • special program C (e.g. for Speed masses),
  • indication of thermocouple wear,
  • SPMW software automatically reducing overshoots,
  • the possibility of changing the program during its implementation,
  • kiln operating hours counter,
  • optionally, the ability to control the catalyst and program its shutdown threshold,
    • optional wireless communication with a computer enabling registration of parameters and visualization of the process.

Parameters common to all KXP4 versions:

  • Temperature setting range: 40°C - 1100°C
  • Stop times: from 0min to 9h59min
  • Program. heating rate: from 1 to 20 [°C/min]
  • Temperature indication error (<700°C): +/-2°C
  • Temperature indication error (>700°C): +/-3°C
  • Timing Accuracy: 0.4%
  • No-load power consumption: 5VA

Packaging:

  • 1 piece

Product Code: 4906
Brands Neoterm
Laboratory oven Lift 3.0 KXP4 (P,S,R version)

1,260.92€ +vat

1,550.93€ incl tax

Product Code: 5955
Qty: 2-3 Days
Neoterm - Thermocouple for the Lift furnace
Neoterm

82.26€ +vat

101.18€ incl tax

Neoterm - Thermocouple for the Lift furnace

  • Temperature sensor - sheathed thermocouple NiCr-NiAl (type K) for ring heating furnaces Lift Neoterm.

Packaging:

  • 1 piece

Product Code: 5955
Brands Neoterm
Neoterm - Thermocouple for the Lift furnace

82.26€ +vat

101.18€ incl tax

Product Code: 6239
Qty: 3
Ugin Thermocouple FCH05THE0014
Ugin

88.45€ +vat

108.79€ incl tax

Ugin Thermocouple FCH05THE0014

Type K thermocouple for UGIN ring annealing furnaces. (Programix 25, Programix 50, Programix 100, and PC 30)

Packaging:

  • 1 piece

Product Code: 6239
Brands Ugin
Ugin Thermocouple FCH05THE0014

88.45€ +vat

108.79€ incl tax

Product Code: 6335
Qty: Only on request
Laboratory furnace NT 1313 KXP 4 with catalyst (P,S,R version)
Neoterm

2,152.87€ +vat

2,648.03€ incl tax

Laboratory furnace NT 1313 KXP 4 with catalyst (P,S,R version)

  • NT 1313 is a muffle plate furnace for laboratory and industrial use. The furnace uses high-quality insulating refractory materials and a reliable corundum heating unit with built-in heaters.
  • The furnace is designed for work requiring precise temperature measurement, including heating, ashing, melting, burning off impurities, heating casting molds in prosthetic laboratories, heat treatment of metals, firing fine ceramics and stained glass windows.

Benefits:

  • heating chamber capacity 4.5 dm3,

  • stainless steel housing,

  • heating unit with built-in heaters, with three heating plates, with exceptionally high reliability,

  • the interior of the chamber and the heater resistant to mechanical damage,

  • large chamber in relation to external dimensions,

  • two-position door pressed with a spring protecting against self-closing during operation,

  • door switch disconnecting the power supply to the heaters,

  • sheathed thermocouple, closed, with increased durability,

  • thermal insulation made of fibrous refractory materials,

  • a fireplace that allows you to connect an extractor,

  • the thermoregulator placed on the side of the oven facilitates operation and is not exposed to the heat radiating from the door and the removable load,

  • small furnace weight,

Technical data:

  • heating chamber capacity 4.5 dm3,

  • stainless steel housing,

  • heating unit with built-in heaters, with three heating plates, with exceptionally high reliability,

  • the interior of the chamber and the heater resistant to mechanical damage,

  • large chamber in relation to external dimensions,

  • two-position door pressed with a spring protecting against self-closing during operation,

  • door switch disconnecting the power supply to the heaters,

  • sheathed thermocouple, closed, with increased durability,

  • thermal insulation made of fibrous refractory materials,

  • a fireplace that allows you to connect an extractor,

  • the thermoregulator placed on the side of the oven facilitates operation and is not exposed to the heat radiating from the door and the removable load,

  • small furnace weight,

  • furnace equipped with a catalyst.

KXP4 thermoregulator:

  • The KXP4 is a programmable microprocessor controller with a backlit alphanumeric display, sound signaling and a Bluetooth modem that enables recording and visualization of the process on a computer.

    The KXP4 is available in three versions:

  • [P]basic - 1 1-stage program

  • [S]standard 3 programs max. 3-stage, stages 2 and 3 can have a programmed cooling rate instead of heating, adjustable delay of switching on the furnace operation up to 9 days.
  • [R]extended 9 programs max. 5-stage, stages 2, 3, 4 and 5 can have a programmed cooling rate instead of heating, adjustable delay of switching on the furnace operation up to 9 days.

Each version has:

  • stages with programmable heating rate and stop time,
  • special program C (e.g. for Speed masses),
  • indication of thermocouple wear,
  • SPMW software automatically reducing overshoots,
  • the possibility of changing the program during its implementation,
  • kiln operating hours counter,
  • optionally, the ability to control the catalyst and program its shutdown threshold,
  • optional wireless communication with a computer enabling registration of parameters and visualization of the process.

Parameters common to all KXP4 versions:

  • Temperature setting range: 40°C - 1100°C
  • Stop times: from 0min to 9h59min
  • Program. heating rate: from 1 to 20 [°C/min]
  • Temperature indication error (<700°C): +/-2°C
  • Temperature indication error (>700°C): +/-3°C
  • Timing Accuracy: 0.4%
  • Power consumption without load: 5 VA

Packaging:

  • 1 piece

Product Code: 6335
Brands Neoterm
Laboratory furnace NT 1313 KXP 4 with catalyst (P,S,R version)

2,152.87€ +vat

2,648.03€ incl tax

Product Code: 6846
Qty: Only on request
Magma catalyst for ring heating furnace
Renfert

880.71€ +vat

1,083.28€ incl tax

Magma catalyst for ring heating furnace

Thanks to the catalytic oxidation of gases, the catalytic converter reduces annoying smoke and odor.

Renfert catalog number 23000001

Advantages:

  • Intelligent control by the Magma furnace.
  • Chemical conversion of organic substances to carbon dioxide and water vapor.
  • Increasing the durability of the catalyst thanks to the automatic shutdown function at a temperature of 650 °C.
  • When using the Speed program, the catalytic converter remains on all the time.

Technical data:

  • Permissible mains voltage is 230 V.
  • Power consumption 580 W
  • Weight 4.8 kg.
  • Dimensions (width x height x depth) 190x370x170mm.

Packaging:

  • 1 piece

Product Code: 6846
Brands Renfert
Magma catalyst for ring heating furnace

880.71€ +vat

1,083.28€ incl tax

Product Code: 8228
Qty: Only on request
Magma Furnace for heating rings
Renfert

2,454.75€ +vat

3,019.34€ incl tax

Magma Furnace for heating rings

Magma is a ring heating furnace with the best technical properties that meet all requirements in terms of programming, operation and ergonomics.

Renfert catalog number 23000000

Advantages:

  • Four-sided heating ensures even heating throughout the entire oven chamber.
  • Fast heating: up to 900°C (1654°F) in just 60 minutes.
  • 99 places to set programs + 1 program for quick heating.
  • The one-piece furnace chamber prevents local heat loss.
  • It guarantees even temperature distribution thanks to the high density of heating coils in areas requiring heat.

Technical data:

  • Permissible mains voltage 220 - 240 V
  • Permissible mains frequency 50 - 60 Hz
  • Temperature range 1100°C
  • Power consumption 1900 W
  • Mains input fuse 12 A(T)
  • Programmable heating rate 9°C/min
  • Max. heating rate in 1 hour 900°C
  • Number of programmable stage programs 99
  • Number of quick programs 1
  • Volume (chamber) 3.45 l
  • Temperature sensor type PtRh-Pt
  • Weight 30 kg
  • Dimensions (W x H x D) 430 x 500 x 440 mm

Packaging:

  • 1 pc. device without catalytic converter

Product Code: 8228
Brands Renfert
Magma Furnace for heating rings

2,454.75€ +vat

3,019.34€ incl tax

Product Code: 8491
Qty: Out Of Stock
PROGRAMIX 50 ring heating furnace PROMOTION
Ugin

1,754.87€ +vat

2,158.49€ incl tax

PROGRAMIX 50 ring heating furnace PROMOTION

PROGRAMIX 50:

  • 30 programs;
  • power supply: 220 V / 50 Hz;
  • power 2000W;
  • 120 (H) x 170 (W) x 210 (D) mm;
  • weight 34 kg

Package:

1 piece.

Product Code: 8491
Brands Ugin
PROGRAMIX 50 ring heating furnace PROMOTION

1,754.87€ +vat

2,158.49€ incl tax

Product Code: 8500
Qty: 2-3 Days
Ugin PROGRAMIX 50 - heating muffle
Ugin

538.73€ +vat

662.64€ incl tax

Ugin PROGRAMIX 50 - heating muffle

Heating muffle for the Programix-50 furnace

Package:

  • 1 piece

Product Code: 8500
Brands Ugin
Ugin PROGRAMIX 50 - heating muffle

538.73€ +vat

662.64€ incl tax

Product Code: 11612
Qty: Out Of Stock
The furnace for heating up the MAGMA rings with an outlet for a catalyst
Renfert

2,545.63€ +vat

3,131.13€ incl tax

The furnace for heating up the MAGMA rings with an outlet for a catalyst

Magma - ring annealing furnace.

Advantages:

  • Even distribution of heat throughout the chamber by heating it from four sides.
  • Fast heating up time of only 60 minutes. up to 900 ° C.
  • 99 programmable places + 1 program for baking a quick mass.

Technical data:

  • mains voltage 220-240 V
  • power consumption 1900 W
  • mains fuse at the 12 A input
  • temperature range 0 ° C - 1100 ° C.
  • programmable degree of temperature increase 0 ° C - 9 ° C / min.
  • maximum temperature rise in 1 hour 900 ° C.
  • number of programmable programs 99
  • number of quick programs 1
  • heating chamber volume 3.45l
  • external dimensions with a handle and chimney 430x500x440 mm
  • external dimensions with a handle and a catalyst 430x610x550 mm
  • thermocouple type PtRh- Pt
  • weight booster with catalyst 34.8 kg
  • weight with the chimney 30 kg.

Package:

1 piece.

Product Code: 11612
Brands Renfert
The furnace for heating up the MAGMA rings with an outlet for a catalyst

2,545.63€ +vat

3,131.13€ incl tax

Product Code: 13247
Qty: 2-3 Days
Laboratory furnace NT1313 KXP4 (P, S, R version)
Neoterm

1,388.15€ +vat

1,707.42€ incl tax

Laboratory furnace NT1313 KXP4 (P, S, R version)

NT 1313 is a muffle and plate furnace for laboratory and industrial purposes. The furnace uses high-quality insulating refractory materials and a reliable corundum heating unit with embedded heaters. The furnace is designed for works requiring precise temperature measurement, including annealing, incineration, melting, burning of pollutants, heating of foundry molds in prosthetic laboratories, heat treatment of metals, firing of fine ceramics and stained glass.

Advantages:

  • heating chamber capacity 4.5 dm3,

  • stainless steel housing,

  • heating unit with built-in heaters, with three heating plates, extremely reliable,

  • the interior of the chamber and heaters resistant to mechanical damage,

  • large chamber in relation to the external dimensions,

  • two-position door pressed with a spring protecting against self-closing during operation,

  • door switch disconnecting the power supply to the heaters,

  • sheathed, closed thermocouple with increased durability,

  • thermal insulation from fibrous refractory materials,

  • a fireplace that allows you to connect an extractor hood,

  • a thermoregulator located on the side of the furnace facilitates its operation and is not exposed to heat radiating from the door and the removable load,

  • low weight of the stove,

Technical data:

  • heating chamber capacity 4.5 dm3,

  • stainless steel housing,

  • heating unit with built-in heaters, with three heating plates, extremely reliable,

  • the interior of the chamber and heaters resistant to mechanical damage,

  • large chamber in relation to the external dimensions,

  • two-position door pressed with a spring protecting against self-closing during operation,

  • door switch disconnecting the power supply to the heaters,

  • sheathed, closed thermocouple with increased durability,

  • thermal insulation from fibrous refractory materials,

  • a fireplace that allows you to connect an extractor hood,

  • a thermoregulator located on the side of the furnace facilitates its operation and is not exposed to heat radiating from the door and the removable load,

  • low weight of the stove,

  • optionally, the furnace can be equipped with a catalytic converter.

KXP4 thermoregulator:

  • The KXP4 is a programmable microprocessor controller with an illuminated alphanumeric display, sound signaling and a Bluetooth modem that enables registration and visualization of the process on a computer.

    The KXP4 is available in three versions:

  • [P] basic - 1 1-stage program

  • [S] standard 3 programs max. 3 stages, stages 2 and 3 can be programmed for cooling rate instead of heating, adjustable delay for turning on the oven operation up to 9 days.
  • [R] extended 9 programs max. 5 steps, steps 2, 3, 4 and 5 can be programmed for cooling rate instead of heating, adjustable delay for turning on the oven operation up to 9 days.

Each version has:

  • stages with programmable heating rate and stop time,
    • special C program (e.g. for Speed masses),
    • indication of thermocouple wear,
  • SPMW software that automatically reduces overshoots,
  • the possibility of changing the program during its implementation,
  • stove operating hours counter,
  • optional catalyst control and programming of its switch-off threshold,
  • optional wireless communication with a computer for parameter registration and process visualization.

Parameters common to all KXP4 versions:

  • Temperature setting range: 40 ° C - 1100 ° C
    • Stop times: from 0 minutes to 9 hours 59 minutes
    • Program. heating rate: from 1 to 20 [° C / min]
    • Temperature indication error (<700 ° C): +/- 2 ° C
    • Temperature indication error (> 700 ° C): +/- 3 ° C
    • Timing accuracy: 0.4%
    • No-load power consumption: 5 VA

Package:

  • 1 piece

Product Code: 13247
Brands Neoterm
Laboratory furnace NT1313 KXP4 (P, S, R version)

1,388.15€ +vat

1,707.42€ incl tax

Product Code: 15692
Qty: 2-3 Days
Laboratory furnace Lift 3.0 MX
Neoterm

1,760.11€ +vat

2,164.94€ incl tax

Laboratory furnace Lift 3.0 MX

The furnace is distinguished by a number of innovative design solutions that make the work pleasant and the furnace reliable. The furnace uses high-quality refractory insulation materials and a reliable corundum heating unit with embedded heaters. The furnace is designed for laboratory work requiring precise temperature measurement, including annealing, incineration, melting, burning of pollutants, heating of casting molds in prosthetic laboratories, etc.

The LIFT 3.0 furnace has:

  • Heating chamber capacity: 3 dm3,
  • Stainless steel housing, double, ventilated, ensuring a low temperature of the external surface,
  • Heating unit with built-in heaters with extremely high reliability,
  • The interior of the chamber and heaters resistant to mechanical damage,
  • The door lifted up to protect the user against heat radiating from it and burns by touch,
  • Door switch disconnecting the power supply to the heaters,
  • Sheathed, closed thermocouple with increased durability and low time constant,
  • Thermal insulation from fibrous refractory materials,
  • A fireplace that allows you to connect an extractor hood,
  • A thermoregulator located under the stove,
  • Large chamber in relation to the external dimensions,
  • Low weight of the stove,
  • Optionally, the furnace can be equipped with a catalyst.

MX thermoregulator:

  • The MX is a programmable microprocessor controller with two 4-digit LED displays.
  • simultaneously displays the preset / preset temperature and temperature in the furnace chamber,
  • is programmed with a 4-button key,
  • has a reading resolution of 1 ° C,
  • signals the heating and wear of the thermocouple,
  • performs PID control (factory-selected settings for the furnace).

Packaging:

  • 1 piece

Product Code: 15692
Brands Neoterm
Laboratory furnace Lift 3.0 MX

1,760.11€ +vat

2,164.94€ incl tax

Showing 1 to 12 of 12 (1 Pages)