Prosthetics / Agar

What is agar and what is it for ?

Agar is a material composed primarily of water and marine algae. It shows high precision in making molds, but less than silicone, therefore it is rather not used to duplicate models for combined and precise works. The advantage of agar is its low price and the possibility of multiple use. The disadvantage is the long preparation process, the short lifetime of the mold, and in the case of duplicating the models in the refractory mass, the disposability of the matrix made. Making an agar mold begins with melting it, i.e. bringing it to a liquid state. For this purpose, the agar is diced with a regular knife and thrown into an agar dish. The smaller the cube, the faster the agar dissolves.

Product Code:: 438
Castogel Agar 6kg
Bego

459.85zł +vat512.00zł

496.64zł incl tax

Castogel Agar 6kg

Agar Castogel is a special duplicating material designed for the fabrication of precision partial dentures and combined work.

Features:

  • High accuracy of reproducing even the smallest details.
  • Tear-resistant duplicating mold.
  • Exceptional flexibility.
  • Very high durability, when heated once a day, it can be used for about 4 weeks.

Package:

6kg.

Product Code: 438
Brand: Bego
Castogel Agar 6kg

459.85zł +vat512.00zł

496.64zł incl tax

Product Code:: 842
Repligel PG - agar for duplicating plaster models
Dent-E-Con

189.51zł +vat259.00zł

233.10zł incl tax

Repligel PG - agar for duplicating plaster models

Repligel PG is an agar mass adapted to duplicate gypsum models. Due to the use of a special recipe, the surface of the cast negative after binding of the agar remains dry and does not react with the plaster model. The material allows you to obtain high-quality duplicated models even with sharp contours and deep undercuts. Repligel PG can be used many times just like traditional agar - it allows to significantly reduce the cost of duplicating models - we recommend it especially to technicians who work by thermal injection of acetal and nylon.

Instruction:

The gel should be cut into small pieces (the smaller the better), placed in an agar dish or other melting device. Preheat to 90-95C, stirring constantly. Stirring prevents the formation of lumps and helps to obtain a uniform gel consistency. Avoid overheating the gel (boiling) as it causes the water to evaporate and shortens the life of the product. To minimize water evaporation during heating, keep the agar dish closed. Never add water when melting the agar for the first time.

After melting, the gel must be cooled to 47-48C.

Before duplicating, place the model in warm water for 15-20 minutes to "soak" it.

CAUTION:

Before duplicating, the model on the surface must be absolutely dry to prevent water from entering the plaster surface from reacting with the agar.

The setting time at room temperature is about 1 hour.

After the model is released, the agar should be washed and closed in a container until re-use - this process (washing) also replenishes the water lost during melting. However, add 50-100 ml of water per 6 kg of gel if the gel dries out during storage.

Features:

  • Accurate mapping of details.
  • Tear resistant.
  • High durability.

Packaging: - 6 kg

Product Code: 842
Repligel PG - agar for duplicating plaster models

189.51zł +vat259.00zł

233.10zł incl tax

Product Code:: 919
Agar Microform 6kg
Schutz Dental

305.56zł +vat

375.84zł incl tax

Agar Microform 6kg

Agar Microform is a special duplicating material designed for the fabrication of precision partial dentures and combined work.

Features:

  • Tear-resistant shape.
  • Very flexible.
  • High durability.
  • Green color.

Package:

6kg.

Product Code: 919
Agar Microform 6kg

305.56zł +vat

375.84zł incl tax

Product Code:: 2255
Shera - Sheraform 6kg
Shera

415.45zł +vat

511.00zł incl tax

Shera - Sheraform 6kg

White material for duplicating agar-based models. Very precise - its consistency resembles silicone.

Features:

  • White color
  • extremely durable material
  • very smooth casting surfaces - qualitatively comparable to the effects of silicone
  • tear resistance
  • reusable mass

Instruction:

  • When using for the first time, do not add water.
  • The melting point should not exceed 90/92 degrees C, higher melting point may damage the mass.
  • Stir until the mass is completely liquid, otherwise it will be lumpy.
  • Before doubling, irrigate the model in lukewarm water for 15 to 30 minutes.
  • Working temperature 45 to 50 degrees C
  • Setting time minimum 60 minutes
  • If cold water is used to cool the agar to accelerate setting, allow the mold to warm to room temperature before pouring in the investment material.
  • Add 50 to 100 ml of water for re-use.

When melting the mass in a microwave:

  • Cut the agar into small pieces, add water and stir, then pour off the water.
  • Put the prepared mass into the microwave in a non-metallic container.
  • Switch the device on for 60 seconds at full power.
  • Remove and stir for about 30 seconds.
  • Repeat points 3 and 4 2 or 3 times until the weight is approximately 84 degrees C.
  • Pouring the prepared model with agar.

Package:

  • 6kg

Product Code: 2255
Brand: Shera
Shera - Sheraform 6kg

415.45zł +vat

511.00zł incl tax

Product Code:: 4754
Agar Gelon 6kg
Dreve

326.18zł +vat472.00zł

401.20zł incl tax

Agar Gelon 6kg

Agar Gelon is a special duplicating material designed for the fabrication of precision partial dentures and combination work and dentures using the infusion method.

It melts very well in the microwave!

Colour:

  • green

Package:

6kg.

Product Code: 4754
Brand: Dreve
Agar Gelon 6kg

326.18zł +vat472.00zł

401.20zł incl tax

Product Code:: 11770
Agar Repligel PD 6kg Promotion
Dent-E-Con

243.09zł +vat

299.00zł incl tax

Agar Repligel PD 6kg Promotion

Skeleton and infusion agar. Can be melted in a microwave oven. Very accurate and hard. Red colour

Package:

  • 6kg

Product Code: 11770
Agar Repligel PD 6kg Promotion

243.09zł +vat

299.00zł incl tax

Product Code:: 12821
6 kg Repligel P Agar for skeletons
Dent-E-Con

210.57zł +vat

259.00zł incl tax

6 kg Repligel P Agar for skeletons

Thanks to the excellent accuracy of reproducing even the smallest details, REPLIGEL is perfectly suited for demanding partial dentures. It creates a tear-resistant, highly flexible duplicating mold that causes no problems with undercuts. The high-quality base material ensures an extremely long service life.

Features:

  • pink color
  • for duplicating investment material models

Packaging: - 6 kg

Product Code: 12821
6 kg Repligel P Agar for skeletons

210.57zł +vat

259.00zł incl tax

Product Code:: 13056
ECOgel-agar for duplicating plaster models pink 6 kg
Ecoline

202.44zł +vat

249.00zł incl tax

ECOgel-agar for duplicating plaster models pink 6 kg

Pink agar for duplicating plaster models in the technique of making prostheses from thermoplastic materials (May be used instead of silicone.)

Instruction:

The gel should be cut into small pieces (the smaller the better), placed in an agar dish or other melting device. Preheat to 90-95C, stirring constantly. Stirring prevents the formation of lumps and helps to obtain a uniform gel consistency. Avoid overheating the gel (cooking) as it causes water evaporation and shortens the life of the product. To minimize water evaporation during heating, keep the agar dish closed. Never add water when melting the agar for the first time.

After melting, the gel must be cooled to 47-48C.

Before duplicating, place the model in warm water for 15-20 minutes to "soak" it.

ATTENTION:

Prior to multiplication, the model on the surface must be absolutely dry to prevent water from entering the plaster surface from reacting with the agar.

The setting time at room temperature is about 1 hour.

After the model is released, the agar should be washed and closed in a container until re-use - this process (washing) also replenishes the water lost during melting. However, add 50-100 ml of water per 6 kg of gel if the gel dries out during storage.

Package:

6kg.

Product Code: 13056
Brand: Ecoline
ECOgel-agar for duplicating plaster models pink 6 kg

202.44zł +vat

249.00zł incl tax

Product Code:: 13057
ECOgel-agar for duplicating plaster models transparent 6 kg
Ecoline

202.44zł +vat

249.00zł incl tax

ECOgel-agar for duplicating plaster models transparent 6 kg

Transparent agar for duplicating gypsum models in the technique of making dentures from thermoplastic materials (Can be used instead of silicone.)

Instruction:

The gel should be cut into small pieces (the smaller the better), placed in an agar dish or other melting device. Preheat to 90-95C, stirring constantly. Stirring prevents the formation of lumps and helps to obtain a uniform gel consistency. Avoid overheating the gel (cooking) as it causes water evaporation and shortens the life of the product. To minimize water evaporation during heating, keep the agar dish closed. Never add water when melting the agar for the first time.

After melting, the gel must be cooled to 47-48C.

Before duplicating, place the model in warm water for 15-20 minutes to "soak" it.

ATTENTION:

Prior to multiplication, the model on the surface must be absolutely dry to prevent water from entering the plaster surface from reacting with the agar.

The setting time at room temperature is about 1 hour.

After the model is released, the agar should be washed and closed in a container until re-use - this process (washing) also replenishes the water lost during melting. However, add 50-100 ml of water per 6 kg of gel if the gel dries out during storage.

Package:

6kg

Product Code: 13057
Brand: Ecoline
ECOgel-agar for duplicating plaster models transparent 6 kg

202.44zł +vat

249.00zł incl tax

Product Code:: 13058
Green ECOgel-agar for duplicating 6 kg models
Ecoline

202.44zł +vat

249.00zł incl tax

Green ECOgel-agar for duplicating 6 kg models

Agar for duplicating models, for skeletal dentures and for the "infusion" method

Package:

6 kg

Product Code: 13058
Brand: Ecoline
Green ECOgel-agar for duplicating 6 kg models

202.44zł +vat

249.00zł incl tax

Product Code:: 15154
Agar Progel 2kg
Emichem

83.40zł +vat111.50zł

102.58zł incl tax

Agar Progel 2kg

Agar Progel is an agar hydrocolloid mass for duplicating models, intended for the fabrication of skeletal dentures and combined works. Flexible, thermally reversible, reusable. Temp. working 45 ° C. It reproduces the finest details accurately. Low temperature handling reduces shrinkage and optimizes the result

Features:

  • Accurate mapping of details.
  • Tear resistant.
  • High durability.

Package:

  • 2kg

Product Code: 15154
Brand: Emichem
Agar Progel 2kg

83.40zł +vat111.50zł

102.58zł incl tax

Showing 1 to 11 of 11 (1 Pages)