Product Code:: 6081
Amber Mill C12 / 5pcs PROMOTION
Hass

351.85zł +vat

380.00zł incl tax

Amber Mill C12 / 5pcs PROMOTION

Amber Mill is the first lithium disilicate glass-ceramic with the ability to regulate translucency by temperature and crystallization time (HT / MT / LT / MO).

Benefits:

  • It is characterized by unrivaled mechanical properties, easy processing and high aesthetic values.

  • Strength after crystallization 450MPa

  • Translucency is dependent on the time of crystallization.

Caution:

 Do obróbki i polerowania polecamy zestaw kamieni i gumek Diadur/Diapro kod mikran 2251

Package:

  • 5 pcs

Product Code: 6081
Brand: Hass
Amber Mill C12 / 5pcs PROMOTION

351.85zł +vat

380.00zł incl tax

Product Code:: 7657
IPS Empress CAD Cerec / InLab LT I 12 / 5pcs
Ivoclar Vivadent Technical

278.52zł +vat341.82zł

300.80zł incl tax

IPS Empress CAD Cerec / InLab LT I 12 / 5pcs

Leucite-reinforced ceramic glass blocks consisting of a glassy and a crystalline phase. They are used to perform extremely aesthetic, completely anatomical reconstruction of a single tooth, using CAD / CAM technology in the Cerec system and in the laboratory system. Due to the difference in thermal expansion coefficients (WRC) between the glass phase and the crystal phase (leucite), compressive stresses arise in the glass phase during cooling after sintering. This mechanism increases the strength, thanks to which the IPS Empress CAD material achieves a bending strength of 160 MPa

Advantages:

  • Good accuracy of fit;
  • Homogeneous surface;
  • High strength;
  • Exact color compliance with the shade guide.

Technical properties:

  • WRC (100- 400 ° C) [10 - 6- K] CTE} - 16.6
  • WRC (100-500 ° C) [10-6 K] - 17.5
  • Bending resistance (biaxial) - 160
  • Cracking resistance [MPa m0.5] - 1.3
  • Vickers hardness [MPa] - 6200
  • Chemical solubility [µg / cm2] - 25

Indications:

  • Anterior and posterior crowns
  • Partial crowns
  • Veneers

IPS Empress CAD LT (Low Translucency) LT blocks are available in 9 of the most popular AD shades and 4 Bleach BL shades. Due to their high brightness, higher than HT blocks, they are ideal for larger restorations (e.g. anterior and posterior crowns). LT blocks have a natural degree of brightness and chromaticity. This prevents the embedded restorations from graying out. These blocks have a natural fluorescence, which allows the restoration to be naturally adapted to the remaining teeth under different lighting conditions. LT blocks are perfect for working with the cut back technique.

Dimensions I 12:

  • Width: 10.0mm
  • Length: 12.0 mm
  • Height: 15.0 mm

Package:

1 box / 5pcs

Product Code: 7657
IPS Empress CAD Cerec / InLab LT I 12 / 5pcs

278.52zł +vat341.82zł

300.80zł incl tax

Product Code:: 7658
IPS Empress for CEREC / inLab CAD LT C14 / 5
Ivoclar Vivadent Technical

278.52zł +vat341.82zł

300.80zł incl tax

IPS Empress for CEREC / inLab CAD LT C14 / 5

Leucite-reinforced ceramic glass blocks consisting of a glassy and a crystalline phase. They are used to perform extremely aesthetic, completely anatomical reconstruction of a single tooth, using CAD / CAM technology in the Cerec system and in the laboratory system. Due to the difference in thermal expansion coefficients (WRC) between the glass phase and the crystal phase (leucite), compressive stresses arise in the glass phase during cooling after sintering. This mechanism increases the strength, thanks to which the IPS Empress CAD material achieves a bending strength of 160 MPa

Advantages:

  • Good accuracy of fit;
  • Homogeneous surface;
  • High strength;
  • Exact color compliance with the shade guide.

Technical properties:

  • WRC (100- 400 ° C) [10 - 6- K] CTE} - 16.6
  • WRC (100-500 ° C) [10-6 K] - 17.5
  • Bending resistance (biaxial) - 160
  • Cracking resistance [MPa m0.5] - 1.3
  • Vickers hardness [MPa] - 6200
  • Chemical solubility [µg / cm2] - 25

Indications:

  • anterior and posterior crowns
  • partial crowns
  • veneers

IPS Empress CAD LT (Low Translucency) LT blocks are available in 9 of the most popular AD shades and 4 Bleach BL shades. Due to their high brightness, higher than HT blocks, they are ideal for larger restorations (e.g. anterior and posterior crowns). LT blocks have a natural degree of brightness and chromaticity. This prevents the embedded restorations from graying out. These blocks have a natural fluorescence, which allows the restoration to be naturally adapted to the remaining teeth under different lighting conditions. LT blocks are perfect for working with the cut back technique.

Dimensions C14:

  • Width: 12.0mm
  • Length: 14.0 mm
  • Height: 18.0 mm

Package:

1 box / 5pcs

Product Code: 7658
IPS Empress for CEREC / inLab CAD LT C14 / 5

278.52zł +vat341.82zł

300.80zł incl tax

Product Code:: 7751
IPS Empress CAD Cerec / InLab Multi I12 / 5pcs
Ivoclar Vivadent Technical

360.36zł +vat442.26zł

389.19zł incl tax

IPS Empress CAD Cerec / InLab Multi I12 / 5pcs

Leucite-reinforced glass-ceramic blocks consisting of a glassy and a crystalline phase. They are used to perform extremely aesthetic, completely anatomical reconstruction of a single tooth, using CAD / CAM technology in the Cerec system and in the laboratory system. Due to the difference in thermal expansion coefficients (WRC) between the glass phase and the crystal phase (leucite), compressive stresses arise in the glass phase during cooling after sintering. This mechanism increases the strength, thanks to which the IPS Empress CAD material achieves a bending strength of 160 MPa

Advantages:

  • Good accuracy of fit;
  • Homogeneous surface;
  • High strength;
  • Exact color compliance with the shade guide.

Technical properties:

  • WRC (100- 400 ° C) [10 - 6- K] CTE} - 16.6
  • WRC (100-500 ° C) [10-6 K] - 17.5
  • Bending resistance (biaxial) - 160
  • Cracking resistance [MPa m0.5] - 1.3
  • Vickers hardness [MPa] - 6200
  • Chemical solubility [µg / cm2] - 25

Indications:

  • Anterior and posterior crowns
  • Partial crowns
  • Veneers

IPS Empress CAD Multi:

The blocks are available in the 5 most popular colors of the AD scale and in 3 sizes. Thanks to the natural shade pattern from dentin to the incisal area, restorations made of Multi IPS Empress CAD blocks ensure maximum aesthetics and naturalness. The natural arrangement of opaque and translucent layers allows for different aesthetics. The IPS Empress CAD Multi Block is characterized by a natural fluorescence pattern similar to that of a natural tooth, which allows for a perfect fit of the restoration to your own teeth. Thanks to the innovative combination of a natural color scheme, translucency and fluorescence, highly aesthetic restorations are created in the easiest way.

Dimensions I 12:

  • Width: 10.0mm
  • Length: 12.0mm
  • Height: 15.0 mm

Package:

1pack / 5pcs

Product Code: 7751
IPS Empress CAD Cerec / InLab Multi I12 / 5pcs

360.36zł +vat442.26zł

389.19zł incl tax

Product Code:: 8096
Ips E. Max Cad Cerec / inLab LT I12
Ivoclar Vivadent Technical

546.50zł +vat670.70zł

590.22zł incl tax

Ips E. Max Cad Cerec / inLab LT I12

IPS e.max CAD are lithium disilicate glass-ceramic blocks for CAD / CAM technology. The manufacturing process guarantees that the blocks are completely uniform. The pre-crystallized (blue) block is very easy to process in a CAD / CAM machine. The block in its pre-crystallized state has a characteristic white color that goes through the shade of blue to blue-gray. This color depends on the composition and structure of the glass ceramics. The strength of the material in this state is 130-150 MPa and is therefore comparable with other glass-ceramic blocks currently available on the market. After the blocks are cut out, the restoration is crystallized in an Ivoclar Vivadent ceramic kiln (eg Programat CS). The crystallization process is easy to carry out and, unlike other CAD / CAM systems, the restorations made in this way do not shrink and do not require a time-consuming infiltration process, and the entire process takes about 20-25 minutes. Crystallization at the temperature of 840 ° C causes changes in the structure of the ceramics, and the growth of lithium disilicate crystals takes place. The associated density of 0.2% is already provided for in the CAD software and taken into account in the process of cutting the restoration. Due to changes in the structure, the strength of the material increases to 360 MPa and it obtains appropriate optical properties.
IPS e.max CAD blocks have a natural brightness. Due to the translucency and the variety of shades, full anatomical restorations can be made of this glass-ceramic without any problems.

Indications:

  • Veneers

  • Inlay

  • Onlay

  • Partial crowns

  • Anterior and posterior crowns

  • Implantological superstructures for single restorations (anterior and posterior sections)

Dimensions I 12:

  • Width: 10.0mm

  • Length: 12.0 mm

  • Height: 15.0 mm

    Package:

  • 5 pcs

Product Code: 8096
Ips E. Max Cad Cerec / inLab LT I12

546.50zł +vat670.70zł

590.22zł incl tax

Product Code:: 8098
IPS e.max CAD Cerec / InLab LT C14 / 5pcs
Ivoclar Vivadent Technical

546.50zł +vat670.70zł

590.22zł incl tax

IPS e.max CAD Cerec / InLab LT C14 / 5pcs

IPS e.max CAD are lithium disilicate glass-ceramic blocks for CAD / CAM technology. The manufacturing process guarantees that the blocks are completely uniform. The pre-crystallized (blue) block is very easy to process in a CAD / CAM machine. In its pre-crystallized state, the block has a characteristic white color that goes through the shade of blue to blue-gray. This color depends on the composition and structure of the glass ceramics. The strength of the material in this state is 130-150 MPa and is therefore comparable with other glass-ceramic blocks currently available on the market. After the blocks are cut out, the restoration is crystallized in an Ivoclar Vivadent ceramic kiln (eg Programat CS). The crystallization process is easy to carry out and, unlike other CAD / CAM systems, the restorations made in this way do not shrink and do not require a time-consuming infiltration process, and the entire process takes about 20-25 minutes. Crystallization at the temperature of 840 ° C causes changes in the structure of the ceramics and the growth of lithium disilicate crystals takes place. The associated density of 0.2% is already provided for in the CAD software and taken into account in the process of cutting the restoration. Due to changes in the structure, the strength of the material increases to 360 MPa and it obtains appropriate optical properties.
IPS e.max CAD blocks have a natural brightness. Due to the translucency and the variety of shades, full anatomical restorations can be made of this glass-ceramic without any problems.

Indications:

  • Veneers

  • Inlay

  • Onlay

  • Partial crowns

  • Anterior and posterior crowns

  • Implantological superstructures for single restorations (anterior and posterior sections)

Dimensions C14:

  • Width: 12.4mm

  • Length: 14.5 mm

  • Height: 18.0 mm

    Package:

  • 5 pcs

Product Code: 8098
IPS e.max CAD Cerec / InLab LT C14 / 5pcs

546.50zł +vat670.70zł

590.22zł incl tax

Product Code:: 8379
IPS Empress CAD Cerec / InLab Multi A2 C14 / 5pcs
Ivoclar Vivadent Technical

360.36zł +vat442.26zł

389.19zł incl tax

IPS Empress CAD Cerec / InLab Multi A2 C14 / 5pcs

Characteristic:

  • Leucite-reinforced ceramic glass blocks consisting of a glassy and a crystalline phase. They are used to perform extremely aesthetic, completely anatomical reconstruction of a single tooth, using CAD / CAM technology in the Cerec system and in the laboratory system.

  • Due to the difference in thermal expansion coefficients (WRC) between the glass phase and the crystal phase (leucite), compressive stresses arise in the glass phase during cooling after sintering. This mechanism increases the strength, thanks to which the IPS Empress CAD material achieves a bending strength of 160 MPa

Advantages:

Good accuracy of fit; - homogeneous surface; - High strength; - Exact color compliance with the shade guide.

Technical properties:

  • WRC (100-400 ° C) [10 -6-K] CTE} - 16.6
  • WRC (100-500 ° C) [10-6 K] - 17.5
  • Bending resistance (biaxial) - 160
  • Cracking resistance [MPa m0.5] - 1.3
  • Vickers hardness [MPa] - 6200
  • Chemical solubility [µg / cm2] - 25

Indications:

  • anterior and posterior crowns
  • partial crowns
  • icki

IPS Empress CAD Multi:

  • The blocks are available in the 5 most popular colors of the AD scale and in 3 sizes. Thanks to the natural shade pattern from dentin to the incisal area, restorations made of Multi IPS Empress CAD blocks ensure maximum aesthetics and naturalness. The natural arrangement of opaque and translucent layers allows for different aesthetics. The IPS Empress CAD Multi block is characterized by a natural fluorescence pattern similar to a natural tooth, which allows for a perfect fit of the restoration to your own teeth. Thanks to the innovative combination of a natural color scheme, translucency and fluorescence, highly aesthetic restorations are created in the easiest way.

Dimensions C14:

  • Width: 12.0mm
  • Length: 14.0mm
  • Height: 18.0 mm

Package:

  • 1pack / 5pcs

Product Code: 8379
IPS Empress CAD Cerec / InLab Multi A2 C14 / 5pcs

360.36zł +vat442.26zł

389.19zł incl tax

Product Code:: 9347
Ips E.Max CAD Cerec / inLab HT I12 / 5
Ivoclar Vivadent Technical

546.50zł +vat670.70zł

590.22zł incl tax

Ips E.Max CAD Cerec / inLab HT I12 / 5

High translucency disilicate ceramic blocks.

IPS e.max CAD are lithium disilicate glass-ceramic blocks for CAD / CAM technology. The manufacturing process guarantees that the blocks are completely uniform. The pre-crystallized (blue) block is very easy to process in a CAD / CAM machine. The block in its pre-crystallized state has a characteristic white color that goes through the shade of blue to blue-gray. This color depends on the composition and structure of the glass ceramics. The strength of the material in this state is 130-150 MPa and is therefore comparable with other glass-ceramic blocks currently available on the market. After the blocks are cut out, the restoration is crystallized in an Ivoclar Vivadent ceramic kiln (eg Programat CS). The crystallization process is easy to carry out and, unlike other CAD / CAM systems, the restorations made in this way do not shrink and do not require a time-consuming infiltration process, and the entire process takes about 20-25 minutes. Crystallization at the temperature of 840 ° C causes changes in the structure of the ceramics, and the growth of lithium disilicate crystals takes place. The associated density of 0.2% is already provided for in the CAD software and taken into account in the process of cutting the restoration. Due to changes in the structure, the strength of the material increases to 360 MPa and it obtains appropriate optical properties. IPS e.max CAD blocks have a natural brightness. Due to the translucency and the variety of shades, full anatomical restorations can be made of this glass-ceramic without any problems.

Application:

  • Veneers

  • Iinlay

  • Onlay

  • Partial crowns

Dimensions I 12:

  • Width: 10.0mm
  • Length: 12.0mm
  • Height: 15.0 mm

Package:

  • 5 pcs / pack

Product Code: 9347
Ips E.Max CAD Cerec / inLab HT I12 / 5

546.50zł +vat670.70zł

590.22zł incl tax

Product Code:: 9736
Ips e.max CAD Cerec / inLab HT C14 / 5
Ivoclar Vivadent Technical

546.50zł +vat670.70zł

590.22zł incl tax

Ips e.max CAD Cerec / inLab HT C14 / 5

High translucency disilicate ceramic blocks.

IPS e.max CAD are lithium disilicate glass-ceramic blocks for CAD / CAM technology. The manufacturing process guarantees that the blocks are completely uniform. The pre-crystallized (blue) block is very easy to process in a CAD / CAM machine. The block in its pre-crystallized state has a characteristic white color that goes through the shade of blue to blue-gray. This color depends on the composition and structure of the glass ceramics. The strength of the material in this state is 130-150 MPa and is therefore comparable with other glass-ceramic blocks currently available on the market. After the blocks are cut out, the restoration is crystallized in an Ivoclar Vivadent ceramic kiln (eg Programat CS). The crystallization process is easy to carry out and, unlike other CAD / CAM systems, the restorations made in this way do not shrink and do not require a time-consuming infiltration process, and the entire process takes about 20-25 minutes. Crystallization at the temperature of 840 ° C causes changes in the structure of the ceramics, and the growth of lithium disilicate crystals takes place. The associated density of 0.2% is already provided for in the CAD software and taken into account in the process of cutting the restoration. Due to changes in the structure, the strength of the material increases to 360 MPa and it obtains appropriate optical properties. IPS e.max CAD blocks have a natural brightness. Due to the translucency and the variety of shades, full anatomical restorations can be made of this glass-ceramic without any problems.

Application:

  • Veneers

  • Iinlay

  • Onlay

  • Partial crowns

Dimensions C 14:

  • Width: 12.4mm
  • Length: 14.5mm
  • Height: 18.0 mm

Package:

  • 5 pcs / pack

Product Code: 9736
Ips e.max CAD Cerec / inLab HT C14 / 5

546.50zł +vat670.70zł

590.22zł incl tax

Product Code:: 11268
IPS e.max CAD CEREC / inLab LT B32 / 3
Ivoclar Vivadent Technical

963.60zł +vat1,182.60zł

1,040.69zł incl tax

IPS e.max CAD CEREC / inLab LT B32 / 3

PS e.max CAD are lithium disilicate glass-ceramic blocks for CAD / CAM technology. The manufacturing process guarantees that the blocks are completely uniform. The pre-crystallized (blue) block is very easy to process in a CAD / CAM machine. The block in its pre-crystallized state has a characteristic white color that goes through the shade of blue to blue-gray. This color depends on the composition and structure of the glass ceramics. The strength of the material in this state is 130-150 MPa and is therefore comparable with other glass-ceramic blocks currently available on the market. After the blocks are cut out, the restoration is crystallized in an Ivoclar Vivadent ceramic kiln (eg Programat CS). The crystallization process is easy to carry out and, unlike other CAD / CAM systems, the restorations made in this way do not shrink and do not require a time-consuming infiltration process, and the entire process takes about 20-25 minutes. Crystallization at the temperature of 840 ° C causes changes in the structure of the ceramics, and the growth of lithium disilicate crystals takes place. The associated density of 0.2% is already provided for in the CAD software and taken into account in the process of cutting the restoration. Due to changes in the structure, the strength of the material increases to 360 MPa and it obtains appropriate optical properties. IPS e.max CAD blocks have a natural brightness. Due to the translucency and the variety of shades, full anatomical restorations can be made of this glass-ceramic without any problems.

Indications:

  • Veneers

  • Inlay

  • Onlay

  • Partial crowns

  • Anterior and posterior crowns

  • Implantological superstructures for single restorations (anterior and posterior sections)

Dimensions:

  • Width: 14.5mm

  • Length: 14.5 mm

  • Height: 32.0 mm

Package:

3 pcs.

Product Code: 11268
IPS e.max CAD CEREC / inLab LT B32 / 3

963.60zł +vat1,182.60zł

1,040.69zł incl tax

Product Code:: 11873
IPS e.max CAD CEREC / inLab MT C14 / 5
Ivoclar Vivadent Technical

546.50zł +vat670.70zł

590.22zł incl tax

IPS e.max CAD CEREC / inLab MT C14 / 5

Medium translucency disilicate ceramic blocks.

IPS e.max CAD are lithium disilicate glass-ceramic blocks for CAD / CAM technology. The manufacturing process guarantees that the blocks are completely uniform. The pre-crystallized (blue) block is very easy to process in a CAD / CAM machine. The block in its pre-crystallized state has a characteristic white color that goes through the shade of blue to blue-gray. This color depends on the composition and structure of the glass ceramics. The strength of the material in this state is 130-150 MPa and is therefore comparable with other glass-ceramic blocks currently available on the market. After the blocks are cut out, the restoration is crystallized in an Ivoclar Vivadent ceramic kiln (eg Programat CS). The crystallization process is easy to carry out and, unlike other CAD / CAM systems, the restorations made in this way do not shrink and do not require a time-consuming infiltration process, and the entire process takes about 20-25 minutes. Crystallization at the temperature of 840 ° C causes changes in the structure of the ceramics, and the growth of lithium disilicate crystals takes place. The associated density of 0.2% is already provided for in the CAD software and taken into account in the process of cutting the restoration. Due to changes in the structure, the strength of the material increases to 360 MPa and it obtains appropriate optical properties. IPS e.max CAD blocks have a natural brightness. Due to the translucency and the variety of shades, full anatomical restorations can be made of this glass-ceramic without any problems.

Application:

  • Outlays

  • Veneers

  • Thin veneers

  • Partial crowns

  • Anterior and posterior crowns

Package:

  • 5 pcs / pack

Product Code: 11873
IPS e.max CAD CEREC / inLab MT C14 / 5

546.50zł +vat670.70zł

590.22zł incl tax

Product Code:: 13592
IPS e.max CAD for inLab MO C14 / 5 pcs
Ivoclar Vivadent Technical

546.50zł +vat670.70zł

590.22zł incl tax

IPS e.max CAD for inLab MO C14 / 5 pcs

PS e.max CAD are lithium disilicate glass-ceramic blocks for CAD / CAM technology. The manufacturing process guarantees that the blocks are completely uniform. The pre-crystallized (blue) block is very easy to process in a CAD / CAM machine. The block in its pre-crystallized state has a characteristic white color that goes through the shade of blue to blue-gray. This color depends on the composition and structure of the glass ceramics. The strength of the material in this state is 130-150 MPa and is therefore comparable with other glass-ceramic blocks currently available on the market. After the blocks are cut out, the restoration is crystallized in an Ivoclar Vivadent ceramic kiln (eg Programat CS). The crystallization process is easy to carry out and, unlike other CAD / CAM systems, the restorations made in this way do not shrink and do not require a time-consuming infiltration process, and the entire process takes about 20-25 minutes. Crystallization at the temperature of 840 ° C causes changes in the structure of the ceramics, and the growth of lithium disilicate crystals takes place. The associated density of 0.2% is already provided for in the CAD software and taken into account in the process of cutting the restoration. Due to changes in the structure, the strength of the material increases to 360 MPa and it obtains appropriate optical properties. IPS e.max CAD blocks have a natural brightness. Due to the translucency and the variety of shades, full anatomical restorations can be made of this glass-ceramic without any problems.

Application:

  • Medium-opaque blocks with ideal properties covering the discoloration of the pillars. Especially recommended for the fabrication of frameworks with a reduced anatomical shape intended for veneering and implant-supported restorations.

Dimensions C 14:

  • Width 12.4mm

  • Length 14.5mm

  • Height 18mm

Package:

5 pcs / pack

Product Code: 13592
IPS e.max CAD for inLab MO C14 / 5 pcs

546.50zł +vat670.70zł

590.22zł incl tax

Product Code:: 14257
Amber Mill C14 / 5pcs PROMOTION
Hass

361.11zł +vat

390.00zł incl tax

Amber Mill C14 / 5pcs PROMOTION

Amber Mill is the first lithium disilicate glass-ceramic with the ability to regulate translucency by temperature and crystallization time (HT / MT / LT / MO).

Benefits:

  • It is characterized by unrivaled mechanical properties, easy processing and high aesthetic values.

  • Strength after crystallization 450MPa

  • Translucency is dependent on the time of crystallization.

Caution:

  • For processing and polishing, we recommend the Diadur / Diapro stone and rubber set, code mikran 2251

Package:

  • 5 pcs

Product Code: 14257
Brand: Hass
Amber Mill C14 / 5pcs PROMOTION

361.11zł +vat

390.00zł incl tax

Product Code:: 14268
Amber Mill C32 / 3pcs
Hass

750.00zł +vat

810.00zł incl tax

Amber Mill C32 / 3pcs

Amber Mill is the first lithium disilicate glass-ceramic with the ability to regulate translucency by temperature and crystallization time (HT / MT / LT / MO).

It is characterized by unrivaled mechanical properties, easy processing and high aesthetic values.

Strength after crystallization 450MPa

Translucency is dependent on the time of crystallization.

Caution:

  • For processing and polishing, we recommend the Diadur / Diapro stone and rubber set, code mikran 2251

Package:

3 pcs

Product Code: 14268
Brand: Hass
Amber Mill C32 / 3pcs

750.00zł +vat

810.00zł incl tax

Product Code:: 14273
Amber Mill C40 / 3pcs
Hass

796.30zł +vat

860.00zł incl tax

Amber Mill C40 / 3pcs

Amber Mill is the first lithium disilicate glass-ceramic with the ability to regulate translucency by temperature and crystallization time (HT / MT / LT / MO).

It is characterized by unrivaled mechanical properties, easy processing and high aesthetic values.

Strength after crystallization 450MPa

Translucency is dependent on the time of crystallization.

Caution:

  • For processing and polishing, we recommend the Diadur / Diapro stone and rubber set, code mikran 2251

Package:

3 pcs

Product Code: 14273
Brand: Hass
Amber Mill C40 / 3pcs

796.30zł +vat

860.00zł incl tax

Product Code:: 14332
AMBER MILL C14 any color 1pc - to try
Hass

26.85zł +vat

29.00zł incl tax

AMBER MILL C14 any color 1pc - to try

ATTENTION:

  • The sample can be ordered only once per company.

Amber Mill is the first lithium disilicate glass-ceramic with the ability to regulate translucency by temperature and crystallization time (HT / MT / LT / MO).

Benefits:

  • It is characterized by unrivaled mechanical properties, easy processing and high aesthetic values.

  • Strength after crystallization 450MPa

  • Translucency is dependent on the time of crystallization.

Attention:

  • For processing and polishing, we recommend the Diadur / Diapro stone and rubber set, code mikran 2251

Package:

1 piece.

Product Code: 14332
Brand: Hass
AMBER MILL C14 any color 1pc - to try

26.85zł +vat

29.00zł incl tax

Product Code:: 14333
Amber Mill kiln calibration kit
Hass

112.96zł +vat

122.00zł incl tax

Amber Mill kiln calibration kit

Oven calibration kit

Package:

1 piece.

Product Code: 14333
Brand: Hass
Amber Mill kiln calibration kit

112.96zł +vat

122.00zł incl tax

Showing 1 to 17 of 17 (1 Pages)