Product Code: 1033
Qty: 5
Stratogel 3D - Insulator for 100ml 3D models
Protechno

40.29€ +vat

49.55€ incl tax

Stratogel 3D - Insulator for 100ml 3D models

Gel, despite its stickiness, spreads easily over the surface and forms a thin layer after drying. STRATOGEL acts as a separating film between the 3D resin and acrylic resin. The product has the right viscosity, effective with just one layer. However, a second layer can be applied when dealing with rougher surfaces (printed models larger than 100 microns). The first layer must be completely dry. The plastic layer is easily removed with water and a brush. STRATOGEL comes off without residue, does not damage acrylic and 3D resin, does not change the properties of resins. It is safe and does not contain any toxic substances.

Benefits:

  • Easy application: a single layer is applied with a brush.
  • Creates a very thin insulating layer.
  • Does not contaminate 3D resin or acrylics.
  • Easily removable with water.

Directions for use:

  • Apply a few drops directly from the bottle to the dry model and spread it evenly with a brush.
  • For quick drying, it is recommended to dry the gel with compressed air at low pressure for 30 seconds, air drying for 30 minutes.

Package:

  • 100 ml

Product Code: 1033
Brands Protechno
Stratogel 3D - Insulator for 100ml 3D models

40.29€ +vat

49.55€ incl tax

Product Code: 1985
Qty: 64
Simplex model isolation 80g
Renfert

23.42€ +vat

28.81€ incl tax

Simplex model isolation 80g

SIMPLEX model isolation, Isolator for 3D printed models from resins and filaments.

Renfert catalog number 17350010

Thanks to the ready-to-use agent, you can easily and safely make orthodontic appliances from dental resin on a printed model. Apply a thin layer of the agent using a brush. Once dry, this layer creates a clear insulation between the printed model and the dental acrylic.

Advantages:

  • Suitable for use with models printed from 3D filament and resin.
  • Intended for isolating models in the production of removable orthodontic appliances.
  • Also suitable for models made using the SLA/DLP printing process.
  • One application is enough to achieve optimal separation of the model from the workpiece.
  • The agent can be easily removed with water and does not require steam cleaning.
  • It does not contain substances harmful to health.

Packaging:

  • 1pc/80g

Product Code: 1985
Brands Renfert
Simplex model isolation 80g

23.42€ +vat

28.81€ incl tax

Product Code: 3531
Qty: 13
Anycubic EcoPrint Screen Protector 5 pcs.
Ecoprint

23.42€ +vat

28.81€ incl tax

Anycubic EcoPrint Screen Protector 5 pcs.

EcoPrint printer cover mounted on the LCD screen to protect against spilled resin and mechanical damage. Thanks to this, scratches, cracks and other damage will not appear on the screen. The cover has high light transmittance, so the prints are precise and accurate.

Packaging:

  • 5 pcs

Product Code: 3531
Brands Ecoprint
Anycubic EcoPrint Screen Protector 5 pcs.

23.42€ +vat

28.81€ incl tax

Product Code: 3544
Qty: 56
Anycubic EcoPrint foil for resin tank 1 pc.
Ecoprint

16.68€ +vat

20.51€ incl tax

Anycubic EcoPrint foil for resin tank 1 pc.

Resin tank foil for Anycubic EcoPrint.

Characteristics:

  • Size 278 x 190mm.
  • Thickness 0.3mm.
  • Permeability 92%.
  • ACF foil type.

Advantages:

  • Suitable for fast printing.

Attention:

  • The foil is a consumable part and must be replaced if it is deformed or damaged during printing.
  • The foil should be replaced immediately if any signs of deformation or excessive adhesion occur.

Packaging:

  • 1 piece

Product Code: 3544
Brands Ecoprint
Anycubic EcoPrint foil for resin tank 1 pc.

16.68€ +vat

20.51€ incl tax

Product Code: 3545
Qty: 11
Anycubic Eco Print foil for resin tank 2 pcs.
Ecoprint

31.67€ +vat

38.95€ incl tax

Anycubic Eco Print foil for resin tank 2 pcs.

Resin tank foil for Anycubic EcoPrint.

Characteristics:

  • Size 278 x 190mm.
  • Thickness 0.3mm.
  • Permeability 92%.
  • ACF foil type.

Advantages:

  • Suitable for fast printing.

Attention:

  • The foil is a consumable part and must be replaced if it is deformed or damaged during printing.
  • The foil should be replaced immediately if any signs of deformation or excessive adhesion occur.

Packaging:

  • 2 pcs

Product Code: 3545
Brands Ecoprint
Anycubic Eco Print foil for resin tank 2 pcs.

31.67€ +vat

38.95€ incl tax

Product Code: 4659
Qty: 13
AnyCubic Wash & Cure Plus Machine (washer / lamp)
Anycubic

178.23€ +vat257.91€

219.23€ incl tax

AnyCubic Wash & Cure Plus Machine (washer / lamp)

Ultrasonic cleaner and UV lamp for printed models.

Technical Specifications;

  • Control method: digital tube, LED indicator, control knob
  • Rated power: 40W
  • Input voltage: AC110 / 240V 50 / 60Hz
  • UV light length: 405nm
  • Time selection: 1-60 min
  • Machine Size: 290mm (L) * 270mm (W) * 479mm (H)
  • Washing Basket Size: 192mm (L) * 120mm (W) * 290mm (H)
  • Maximum size of object to be cured: 190mm (D) * 245mm (H)
  • Libra; ~ 6.5 kg

Package:

  • 1 piece

Product Code: 4659
Brands Anycubic
AnyCubic Wash & Cure Plus Machine (washer / lamp)

178.23€ +vat257.91€

219.23€ incl tax

Product Code: 4958
Qty: 1
AnyCubic screen protector for Photo Mono X 6K 5 pcs.
Anycubic

23.42€ +vat

28.81€ incl tax

AnyCubic screen protector for Photo Mono X 6K 5 pcs.

A cover mounted on the LCD screen to protect against spilled resin and mechanical damage. Thanks to this, scratches, cracks and other damage will not appear on the screen. The cover has high light transmittance, so the prints are precise and accurate.

Packaging:

  • 5 pcs

Product Code: 4958
Brands Anycubic
AnyCubic screen protector for Photo Mono X 6K 5 pcs.

23.42€ +vat

28.81€ incl tax

Product Code: 5241
Qty: 29
Resin tray 25x35x5cm
Ikea

1.50€ +vat

1.84€ incl tax

Resin tray 25x35x5cm

Resin tray 25x35x5cm.

Packaging:

  • 1 piece

Product Code: 5241
Brands Ikea
Resin tray 25x35x5cm

1.50€ +vat

1.84€ incl tax

Product Code: 5242
Qty: 46
Resin strainer
Mikran.Pl

14.80€ +vat

18.21€ incl tax

Resin strainer

Convenient strainer for draining the remaining resin after printing.

Packaging:

  • 1 piece.

Product Code: 5242
Brands Mikran.Pl
Resin strainer

14.80€ +vat

18.21€ incl tax

Product Code: 5390
Qty: 33
Thermometer Hygrometer LCD
Mikran.Pl

9.37€ +vat

11.52€ incl tax

Thermometer Hygrometer LCD

Thermometer and humidity sensor.

Thanks to this device, it is possible to measure the environmental conditions in which e.g. resin for 3D printers and many other materials sensitive to humidity and temperature are stored and used.

Technical data:

  • Product type: Temperature and humidity sensor.
  • Connectivity: Bluetooth 4.2 LE.
  • Power: CR2032 battery.
  • Rated voltage: 2.5V - 3V.
  • Humidity range: 0%~99%RH.
  • Temperature range: 0ºC ~ 60ºC.
  • Material: ABS, PMMA.
  • Certifications: QB/WSDJ 2401-2019.
  • White color.
  • Dimensions: 43x43x12.5mm.
  • Additional information: Temperature display every 0.1ºC, Humidity display every 1% RH

Packaging:

  • 1 piece

Product Code: 5390
Brands Mikran.Pl
Thermometer Hygrometer LCD

9.37€ +vat

11.52€ incl tax

Product Code: 13527
Qty: 1
Formlabs Form Wash - a device for cleaning models after printing
Formlabs

607.50€ +vat

747.23€ incl tax

Formlabs Form Wash - a device for cleaning models after printing

Form Wash - A washer for cleaning models from resin residues - An automatic washer that cleans models from uncured resin residues in the SLA technology. - Post-processing device compatible with Formlabs Form 2 3D printers. - The rotor causes the circulation of isopropyl alcohol (IPA), which ensures effective and efficient rinsing of unnecessary material in every detail. - The washer is equipped with a special handle, thanks to which we can move the build plate with printouts and mount it directly in the washer or remove the model from the working table and place it in the basket.

Intelligent solutions:

  • Automatic cleaning - the device will eject the model from the bath after finishing work
  • 15 minutes - average wash time for fresh isopropyl alcohol
  • 8.6 l - the volume of the tank
  • 70 prints - the number of cleaned prints per one tank refill
  • The mechanism of the device will pull the models out of the IPA by itself after a certain time, which is set on the timer. This reduces the risk of damage to the printout due to too long soaking in the IPA. Models are dry and ready without user input in the post-processing process.

Package:

  • 1 piece.

Product Code: 13527
Brands Formlabs
Formlabs Form Wash - a device for cleaning models after printing

607.50€ +vat

747.23€ incl tax

Product Code: 13540
Qty: 3
Formlabs Resin Tank - resin container
Formlabs

59.83€ +vat

73.59€ incl tax

Formlabs Resin Tank - resin container

Resin container compatible with Formlabs Form 2 printer. Sufficient for approx. 20 refills with resin.

Package: 1 pc.

Product Code: 13540
Brands Formlabs
Formlabs Resin Tank - resin container

59.83€ +vat

73.59€ incl tax

Product Code: 13541
Qty: Out Of Stock
Formlabs Resin Tank LT - resin container with extended life for Form 2 printer
Formlabs

100.40€ +vat

123.49€ incl tax

Formlabs Resin Tank LT - resin container with extended life for Form 2 printer

Long life resin container recommended for use with Formlabs Form 2 printer. The manufacturer declares 10 \ u201320x more cycles than for a standard container.

Package:

  • 1 piece.

Product Code: 13541
Brands Formlabs
Formlabs Resin Tank LT - resin container with extended life for Form 2 printer

100.40€ +vat

123.49€ incl tax

Product Code: 15647
Qty: 6
Insulator for 3D models 100 ml
Dentaurum

51.62€ +vat66.84€

63.50€ incl tax

Insulator for 3D models 100 ml

For the isolation of printed models before making braces.

  • Creates an insulating layer between the model and the acrylic.

Packaging:

  • 100 ml

Product Code: 15647
Brands Dentaurum
Insulator for 3D models 100 ml

51.62€ +vat66.84€

63.50€ incl tax

Product Code: 16001
Qty: 1
Mestra - Mixer for 3D resins
Mestra

368.21€ +vat

452.90€ incl tax

Mestra - Mixer for 3D resins

Printing resin stirrer for dental laboratories.

A practical and economical device for shaking resin bottles. Having the resin homogeneously mixed is essential to obtain a perfect printing result.

Benefits:

  • The movement is doubled, making the mixing smooth and very efficient.

  • Excessively vigorous movement will not affect the properties of the resin.

  • Very quiet, has 6 rollers (length 28 cm) and allows you to adjust the rotation speed up to 70 rpm.

Speed:

  • Min: 0 rpm (0 rad min-1)
  • Max: 70 rpm (439.8 rad min-1)

Characteristic:

  • Number of rolls: 6

  • Roll length: 28 cm

  • Load: 4 kg

  • Roller rotation amplitude: 24 mm

  • Power: 25W

  • Voltage: 100-240 V, 50/60 Hz

  • Height: 103mm

  • Width: 253 mm

  • Length: 480 mm

  • Weight: 3.12 kg

Package:

  • 1 piece

Product Code: 16001
Brands Mestra
Mestra - Mixer for 3D resins

368.21€ +vat

452.90€ incl tax

Product Code: 16009
Qty: In a warehouse
Wash & Cure Machine 2.0 washer / lamp
Anycubic

130.98€ +vat

161.11€ incl tax

Wash & Cure Machine 2.0 washer / lamp

Washer and lamp for printed models. It is a 2-in-1 device. It has the functions of rotary washing and curing. The use of this type of device is very convenient and saves time and space. Anycubic Wash & Cure Plus is compatible with most LCD 3D printers, including Elegoo Mars, Phrozen Sonic, or even larger printers, e.g. Anycubic Photon Mono X, Elegoo Saturn. The device is an excellent support for SLA, LCD, DLP printers and laboratory applications. The Plus version offers a larger washing size, making it possible to wash large models. The UV light strip, on the other hand, has the ability to bend the upper L-shaped part, which allows objects to be cured from above.

The device has two cleaning methods:

  • Cleaning in the basket. Take out the model and place it in the basket for direct cleaning.
  • Cleaning without removing the print from the platform, hang the print platform directly on the cleaning basket or cleaning stand.

Benefits:

  • The cover blocks 99.95% of UV rays with a wavelength of 405 nm so you can work with open resin while the device is working.
  • The closed container is tight so you do not smell isopropanol or other volatile cleaning liquids.
  • This effectively prevents splashing and the leakage of liquids, which ensures safety.
  • In curing mode, lenses have been added to the UV lamp which diffuses the light more evenly.
  • A fighter was also added for the 360 'platform, thanks to which the blind angle without light under the model was eliminated.
  • The device is equipped with a knob on which you can set the time from 1-60 minutes.

Parameters:

  • UV lamps power: 25 W
  • UV light wavelength: 405 nm
  • Time selection range: 1 - 60 min
  • Basket washing size: 192mm (L) * 120mm (W) * 290mm (H)
  • Hanging cleaning size: 192mm (L) * 120mm (W) * 235mm (H)
  • Curing Size: 190mm (D) * 245mm (H)
  • Machine Size: 290mm (L) * 270mm (W) * 479mm (H)
  • Weight: 6.5 kg

Package:

  • 1 piece

Product Code: 16009
Brands Anycubic
Wash & Cure Machine 2.0 washer / lamp

130.98€ +vat

161.11€ incl tax

Product Code: 16015
Qty: 3
Resin tank for the Photon Mono X / X6K / M3Plus printer
Anycubic

60.77€ +vat79.52€

74.75€ incl tax

Resin tank for the Photon Mono X / X6K / M3Plus printer

Resin tray for Photon Mono X / X6K / M3Plus printer

Packaging:

  • 1 piece.

Product Code: 16015
Brands Anycubic
Resin tank for the Photon Mono X / X6K / M3Plus printer

60.77€ +vat79.52€

74.75€ incl tax

Product Code: 16016
Qty: In a warehouse
Foil (FEP film) for Photon Mono X and Photon Mono X 6K printers 1 pc.
Anycubic

6.93€ +vat

8.53€ incl tax

Foil (FEP film) for Photon Mono X and Photon Mono X 6K printers 1 pc.

FEP film (foil) for the Photon Mono X printer. Spare size of FEP foil sheet for Anycubic Photon Mono X and Photon Mono X 6K.

Foil dimensions:

  • 260mm x 175mm

Foil thickness:

  • 0.15mm

Advantages:

  • Resistant to high temperatures (204 °C).
  • Chemically resistant.
  • Resistant to UV radiation.

Attention:

  • The FEP foil is a consumable part and must be replaced if it is deformed or damaged during printing.
  • The foil should be replaced immediately if any signs of deformation or excessive adhesion occur.

Packaging:

  • 1 piece.

Product Code: 16016
Brands Anycubic
Foil (FEP film) for Photon Mono X and Photon Mono X 6K printers 1 pc.

6.93€ +vat

8.53€ incl tax

Showing 1 to 18 of 18 (1 Pages)