IPS e.max Ceram Transpa Incisal, incisal material.

Package:

20g.

IPS e.max Ceram Glaze Paste. Glaze in the form of a paste

Package:

3g.

IPS e.max Ceram ZirLiner. Used to characterize white zirconium oxide frameworks. It helps to match the framework shade to the primary shades in IPS e.max Press and IPS e.max CAD

Package:

5g.

IPS e.max Ceram nano-fluoroapatite veneering ceramic for all-ceramic structures. Suitable for firing on all IPS e.max components - both made of glass ceramics and zirconium oxide. Thanks to this combination, a clear scheme for applying individual layers, as well as a combination of aesthetics and strength, and techniques, it can offer the doctor and his patients maximum shine of individual naturalness.

Features:

It comes in 16 AD colors and 4 Bleach colors.

Package:

1pc / 20g.

IPS e.max Ceram Margin, modeling material for the cervical area and for the fabrication of ceramic steps on IPS e.max ZirCAD substructures. Due to the different firing temperature compared to dentine and incisal materials, the Margin materials exhibit excellent overlay stability.

Features:

• It is available in 16 A-D shades and 2 Bleach colors.

Package:

20g.

IPS e.max Ceram Zirliner Kit.

Colors 1 to 4 are used to characterize the white zirconium oxide framework. It helps to match the framework shade to the primary shades in IPS e.max Press and IPS e.max CAD.

Clear color for Bleach colors, and for mixing with IPS e.max Ceram Intensive ZirLiner

Intensive yellow, orange, brown and incisal colors are used to increase the color depth.

Package:

• IPS e.max Ceram Zilliner
• ZL clear, ZL1, ZL2, ZL3, ZL4.- 5g
• IPS e.max Ceram Intensiv ZirLiner yellow, orange, brown, incisal - 5g
• IPS e.mac Ceram ZirLiner liquid - 60 ml
• Shade guide - 1 pc

IPS e.max Press. Glass-ceramic disilicate ingots for stamping technology. The latest production technology has allowed us to obtain an absolutely homogeneous material, which is available in the form of pellets with different opacity.

Indications:

• Anterior and posterior crowns.
• Three point bridges in the anterior region.
• Three point lateral bridges, to the second premolar as the last abutment tooth.
• Pressing onto single galvanic crowns.
• Primary telescopic crowns.

Features:

• Mechanical strength 400 Mpa.
• High Opacity HO ingots are available in the three colors HO1, HO2, HO3

Package:

5 pcs.

IPS e.max Ceram Glaze Liquid.

Package:

15ml.

IPS e.max Ceram modeling liquid Soft.

Features:

Powders mixed with the soft liquid show shorter drying times.

Package:

60ml.

IPS e.max Ceram Transpa.

Features:

They are used for the precise reproduction of transparent areas with all details, mainly in the periphery of the incisal edge.

Package:

20g.

IPS e.max Press MO are glass-ceramic disilicate ingots for press technology. The latest production technology has allowed us to obtain absolutely hemogenic material, which is available in the form of pellets with various degrees of opacity.

Indications:

• Anterior and posterior crowns.
• Three point bridges in the anterior region.
• Three point bridges in the posterior region, to the second abdominal tooth as the last abutment tooth.
• Pressing onto single galvanic crowns.
• Primary telescopic crowns.

Features:

• Bending strength 400 Mpa.
• Medium-opaque MO ingots are available in 5 colors.
• MO 0 for the colors BL 1, BL 2, BL 3, BL 4 for bleached teeth.
• MO 1 for colors A- D A1, A2, B1, B2, C1.
• MO 2 for colors A- D A3, A3.5.
• MO3 for colors A- D B3, B4.
• MO4 for colors A- D A4, C2, C3, C4, D2, D3, D4.
• L-pills - large.

Package:

3 pcs.

IPS e.max Ceram Glaze FLUO paste.

Features:

• It is used in restorations that have not been veneered with IPS e.mac Ceram.
• Additionally, it is applied to frameworks that show no or very little fluorescence.

Package:

3g.

IPS e.max Ceram Essence Kit

The essence powders are used for internal characterization, for mixing with other IPS e.max Ceram powders and for final surface characterization. Masom Essence have been given names that are directly associated with their color, in order to facilitate the selection of the appropriate mass.

Package:

• IPS e.max Essence shades 11 to 19 - 5g
• IPS e.max Ceram Glaze Powder 1 x 5g
• IPS e.max Ceram Glaze Powder Fluo 1 x 5g
• IPS e.max Ceram Glaze Liquid - 1x 15 ml
• IPS e.max Ceram Essence shade guide - 1 piece

IPS e.max Ceram Shades Kit

The 5 different IPS e.max Ceram Shades in the AD and Chromascop scale are used for the final shade modification of IPS e.max restorations as well as for the wash layer.

The 2 IPS e.max Ceram Shades Incisal materials are particularly suitable for anatomically shaped restorations {eg IPS e.max ZirPress}. They simulate the incisal edge and provide translucency and depth effect.

Package:

• Colors 0, 1, 2, 3, 4, I1, I2 - 3g
• Glaze paste - 3g
• Glaze paste FLUO - 3g
• Glaze liquid - 15 ml.

IPS e.max Press HO are glass-ceramic disilicate ingots for press technology. The latest production technology has allowed us to obtain absolutely hemogenic material, which is available in the form of pellets with various degrees of opacity.

Indications:

• Anterior and posterior crowns.
• Three point bridges in the anterior region.
• Three point lateral bridges, to the second premolar as the last abutment tooth.
• Pressing onto single galvanic crowns.
• Primary telescopic crowns.

Features:

• Bending strength 400 Mpa.
• High-opacity HO ingots are available in one color.
• L-pills - large.

Package:

3 pcs.

IPS e.max Ceram Essence, the characterization and tinting materials for ceramic restorations can be fired together with the glaze or separately.

Package:

5g.

IPS e.max Ceram Shade. Final material for color modification of IPS e.max prosthetic restorations, as well as for the "wash" layer

Package:

3g.

IPS e.max Press MO - Medium Opacity

The lozenges are available in 5 color groups {MO 0 - MO4}. Due to the degree of opacity, they are ideal for the fabrication of living, slightly discolored stumps. The individual anatomical shape of the restoration is then carried out using IPS e.max Ceram. Finally, apply the stains and fire the IPS e.max Ceram Glaze.

Package:

• IPS e.max Press Ingots HO - 1x5 pcs.
• IPS e.max Press Ingots MO 0, MO 1, MO 2, MO 3, MO 4, - 1 x 5 pcs.
• IPS e.max Press Ingots L HO 1x 3 pcs.
• IPS e.max Press Ingots L MO 0, MO 1, MO 2, MO 3, MO 4,
• IPS e.max Investment Ring System 100 g - 1 pc
• IPS e.max Investment Ring System 200g - 1 pc
• IPS Silicone Ring 100g - 1 pc
• IPS Silicone Ring 200g - 1 pc
• IPS e.max Alox Plunger - 2 pcs
• IPS e.max Alox Plunger Separator - 20g
• IPS Connector - 1 pc
• IPS e.max Press HO / MO Material Shade Guide - 1 pc

IPS e.max Press MO are glass-ceramic disilicate ingots for press technology. The latest production technology has allowed us to obtain an absolutely homogeneous material, which is available in the form of pellets with various degrees of opacity.

Indications:

• Anterior and posterior crowns.
• Three point bridges in the anterior region.
• Three point lateral bridges, to the second premolar as the last abutment tooth.
• Pressing onto single galvanic crowns.
• Primary telescopic crowns.

Features:

• Bending strength 400 Mpa.
• MO ingots with medium opacity, available in 5 colors.
• MO 0 for Bleach BL1, BL2, BL3, BL4 colors.
• MO1 for colors A- D A1, A2, B1, B2, C1.
• MO2 for colors A- D A3, A3.5.
• MO3 for colors A- D B3, B4.
• Mo4 for colors A- D A4, C2, C3, C4, D2, D3, D4.

Package:

5 pcs.

IPS e.max Ceram Zirliner liquid.

Package:

60 ml.

Fluoroapatite glass ceramics ingots - used for prosthetic restorations on a zirconium oxide substructure.

Package:

5 pcs

IPS e.max Ceram, margin fluid.

Package:

60ml.

IPS e.max Press LT low Translucency

LT ingots are available in 16 AD key colors and 4 Bleach BL shades. Due to their low translucency, they are ideal for the fabrication of larger restorations, e.g. posterior crowns. Restorations made of LT ingots are characterized by a natural degree of brightness and chromaticity. This prevents the embedded restorations from graying out. LT ingots are suitable for the cut bac technique, they can also be used for the staining technique. For the cut back technique, IPS e.max Ceram Incisal and / or Impulse are then used and the characterization is performed with IPS e.max Ceram Essence and Shades.

Package:

5 pcs.

IPS e.max Ceram Deep Dentin.

Deep Dentin materials, characterized by a natural fluorescence, increased opacity and color saturation, enable the natural tooth color to be achieved even when the space is limited, and thus allow for increasing the color intensity, especially in the cervical area, which results in a more accurate color matching of the gingiva. .

Package:

20g.

IPS e.max Ceram Intensiw ZirLiner

The colors yellow, orange, brown, and incisal are used to increase the color depth

Package:

5g

IPS e.max Ceram Impulse Opal Effect.

Opal Effect materials are available in 6 different colors. From Opal Effect - 1 with naturally enhanced opalescence and at the same time high translucency - the brightness between Opal Effect 2 and 4 is gradually increased. Opall Effect 5 is characterized by the typical iridescent color. The Opal Efect Violet material is used to reduce the brightness in the incisal area.

Package:

20 g.

IPS e.max Ceram Impulse Occlusal Dentin.

Occlusal Dentin materials are available in two different colors. They are used to obtain the basic color for chewing surfaces and to intensify the saturation.

Package:

20g

IPS e.max Ceram Impulse Mamelon.

Mamelon materials are available in three different colors. They show high opacity and excellent covering properties, even when applied in thin layers. Depending on the method of work, these materials are laid with thin lines on the surface of the reduced dentin. In this way, an individualized appearance of the incisal edge is achieved.

Package:

20 g

IPS e.max Ceram Impulse Incisal Edge

This material serves to achieve the "halo" effect which is produced in the natural teeth by the refraction of light rays at the incisal edge.

Package:

20g

IPS e.max Ceram Glaze FLUO in powder.

Features:

• It is used in areas of the restoration that have not been veneered with IPS e.max Ceram.
• Additionally, it is applied to frameworks that show no or very little fluorescence

Package:

5g.

IPS e.max Ceram Glaze powder - glaze in powder form.

Package:

5g.

Ips e.max Ceram Glaze spray.

Package:

270 ml

IPS e.max Ceram Gingiva Kit. A set of cramic materials intended for making copies of the gum.

Package:

• 1 x 5 g IPS e.max Ceram ZirLiner Gingiva

• 5 x 20 g IPS e.max Ceram Gingiva, colors: 1, 2, 3, 4, 5

• 4 x 20 g IPS e.max Ceram Intensive Gingiva, colors: 1, 2, 3, 4

• 3 x 5 g IPS e.max Ceram Essence colors: rose, berry, aubergine

• 1 x 1 piece, IPS e.max Ceram Gingiva shade guide

IPS e.max Press HT (High Translucency)

HT ingots are available in 16 colors of AD key and 4 colors for bleached BL teeth.

Features:

• Due to their high translucency, they are ideal for the fabrication of smaller restorations, e.g. inlays and onlays. HT ingot restorations are characterized by a natural chameleon effect and an unusual adaptation to the hard tissues of the tooth.
• HT ingots are ideal for working with the staining technique, as well as for the cut back technique.
• Stain firing and characterization as well as Glaze firing can be performed with IPS e.max Ceram Shades, Essence and Glaze.
• If a correction is required, it can be done with IPS e.max Ceram ceramic materials.

Package:

5 pcs

IPS e.max Press LT low Translucency

LT ingots are available in 16 AD key colors and 4 Bleach BL shades. Due to their low translucency, they are ideal for the fabrication of larger restorations, e.g. posterior crowns. Restorations made of LT ingots are characterized by a natural degree of brightness and chromaticity. This prevents the embedded restorations from graying out. LT ingots are suitable for the cut bac technique, they can also be used for the staining technique. For the cut back technique, IPS e.max Ceram Incisal and / or Impulse are then used and the characterization is performed with IPS e.max Ceram Essence and Shades.

Package:

3 pcs.

IPS e.max Ceram Trial Kit A2

Set composition:

• IPS e.max Ceram ZirLiner 1 5g - 1pc IPS e.max Ceram Margin A2 5g - 1pc
• IPS e.max ceram Deep Dentin A2 5g - 1 piece
• IPS e.max Ceram Dentin A2 5g - 1 pc
• IPS e.max Ceram Transpa Incisal TI 1 5g - 1 pc
• IPS e.max Ceram Transpa Clear 5g - 1pc
• IPS e.max Ceram Opal Effect 1 5g - 1pc
• IPS e.max Ceram Opal Effect 3 5g - 1pc
• IPS e.max Ceram Occlusal Dentin Orange 5g - 1 piece
• IPS e.max Ceram Mamelon Light 5g - 1 pc
• IPS e.max Ceram Essence White 5g - 1pc
• IPS e.max Ceram Essence Sunset 5g - 1pc
• IPS e.max Ceram Essence mahogany 5g - 1pc
• IPS e.max Ceram Shade 1 3g - 1pc
• IPS e.max Ceram Glaze Paste 3g - 1pc
• IPS e.max Ceram Zirliner liquid 15 ml - 1 piece
• IPS e.max Ceram Margin liquid 15 ml - 1 piece
• IPS e.max Ceram Modeling liquid 15 ml - 1 pc
• IPS e.max Ceram Glaze liquid 15 ml - 1 piece

Package:

1 set

IPS e.max Press are lithium disilicate glass-ceramic ingots for the PRESS technology. The manufacturing process guarantees the achievement of completely homogeneous ingots with different levels of translucency. They are characterized by a strength of 400 MPa and are therefore the most durable material of this type. Perfectly matched restorations are made of these in Ivoclar Vivadent press furnaces. The pressed, highly aesthetic tooth-colored restorations are then painted and / or veneered and glazed with IPS e.max Ceram.

HT ingots - high translucency Large ingots

Package:

1 pack / 3 pcs

IPS e.max Ceram Deep Dentin.

Deep Dentin materials, characterized by a natural fluorescence, increased opacity and color saturation, enable the natural tooth color to be achieved even when the space is limited, and thus allow for increasing the color intensity, especially in the cervical area, which results in a more accurate color matching of the gingiva. .

Package:

20g.

IPS e.max Ceram Incisal Incisal mass.

Packaging:

20g.

Ips E. Max Ceram Add-On Incisal

Package:

20g

IPS e.max Ceram Gingiva is a set of materials intended for the reconstruction of the gingival tissue, especially when making restorations fixed on implants.

Colors 1 to 4 intensive materials for creating an individual gingival shade.

Package:

20g

Characteristic:

A lithium disilicate ceramic glass blank for pressing technology. The blank is pressed in a furnace to obtain a very precisely dimensioned restoration, which is then used as a single tooth foundation or a bridge foundation in the area of anterior and posterior teeth.

Advantages:

Simple color reproduction and natural aesthetics regardless of the shade of the prepared tooth; High strength 400 N / mm2; Conventional cementation.

Content:

• 1 x 5 pcs. IPS e.max Press HO (HO1)
• 1 x 5 pcs. IPS e.max Press MO (MO1)
• 4 x 5 pcs. IPS e.max Press LT (LTA1, LTA2, LTA3, LTB1)
• 4 x 5 pcs. IPS e.max Press HT (HTA1, HTA2, HTA3, HTB1)
• 1 piece. ring base 100 g
• 1 piece. base for the ring 200 g
• 1 piece. silicone ring 100 g
• 1 piece. silicone ring 200 g
• 1 piece. IPS Sprue Guide 100 g
• 1 piece. IPS Sprue Guide 200 g
• 1 x 2 pcs. IPS Alox plunger (anodized pistons)
• 1 x 200 g IPS Alox Plunger (anodized piston separator)
• 1 x 10 ml IPS Object Fix Flow
• 1 piece. IPS Ceramic Etching Gel Kit (etching kit)
• 3 pcs. OptraStick Test Pack
• 1 piece. IPS e.max Press HO / MO shade guide;
• 1 piece. IPS e.max Press / CAD LT shade guide;
• 1 piece. IPS e.max Press / CAD HT shade guide

IPS e.max Ceram Gingiva is a set of materials intended for the reconstruction of the gingival tissue, especially when making restorations fixed on implants.

Colors 1 to 5.

Package:

20g

Impulse ingots enable the fabrication of restorations with very distinct opalescent properties. Opal lozenges are available in two variants with different levels of brightness (Opal 1, Opal 2). These pastilles are suitable for making veneers with light-colored teeth, where an iridescent effect is needed.

Package:

5pcs / 1vial

IPS e.max Ceram nano-fluoroapatite veneering ceramic for all-ceramic structures. Suitable for firing on all IPS e.max components - both made of glass ceramics and zirconium oxide. Thanks to this combination, a clear scheme for applying individual layers, as well as a combination of aesthetics and strength, and techniques, it can offer the doctor and his patients maximum shine of individual naturalness.

Features:

It comes in 16 AD colors and 4 Bleach colors.

Package:

1 pc / 100 g

IPS e.max Ceram Transpa Incisal, incisal material.

Package:

100 g.

IPS e.max Ceram Transpa.

Features:

They are used for the precise reproduction of transparent areas with all details, mainly in the periphery of the incisal edge.

Packaging:

100 g

A set of diamonds, cutters, separators and rubber bands for processing porcelain.

Package:

1 set contains 16 pieces of instruments:

• 9 diamond drill bits
• 1 separator with diamond coating
• 1 white porcelain eraser - disc
• 1 blue metal eraser under the porcelain
• 1 carborundum separator 0.22 mm thick
• 1 felt disc with a diameter of 3mm
• 2 diamond-impregnated brushes

Set of Diapol rubber bands and Diasynt stones for processing porcelain and metal.

Application:

• Blue erasers - removing excess and shaping
• Pink erasers - smoothing
• Gray rubber bands - polishing to a high gloss
• Stones for processing metal. The perfect combination of stones and rubber bands for the complete processing of metal and porcelain.

Package:

• 2 stones
• 6 rubber bands

Ivoclar Vivadent presents a new product: IPS e.max Press Multi - the world's first polychromatic embossing ingots!

Advantages:

• layered ingot structure, where the individual layers smoothly pass from the dentin color to the transparent incisal edge,
• high strength,
• Clinically tested lithium disilicate glass ceramics (LS2) main ingredient of lozenges

IPS e.max Press Multi is the name of the new pressing ingots. These ingots are characterized by high strength and are made of lithium-silicon glass ceramics, the quality of which has been proven in many years of clinical tests. A characteristic feature of these pastilles is the visible gradual gradation of color and translucency similar to the corresponding effect in natural teeth: saturation and opacity are higher in the cervical and dental areas, and the incisal area is appropriately translucent. The IPS e.max Press Multi together with the Programat EP 3010 / EP 5010 pressing furnaces and the patented technology enable the pressing process to be carried out economically and efficiently. The IPS e.max Press Multi ingots are available in one size.

Indications:

• Anterior and posterior crowns
• Veneers
• Hybrid link crowns

Attention:

• Due to the specific pressing process, inlays, onlays and bridges cannot be made.
• In addition, all the contraindications listed for IPS e.max Press also apply to IPS e.max Press Multi.

Package:

• Color A1 - 5pcs
• Color A2 - 5pcs
• Accessories