Product Code:: 15186
Base for ring no. 3, model form without cone

20.33zł +vat

25.01zł

Product Code:: 15186
Base for ring no. 3, model form without cone

20.33zł +vat

25.01zł


Base for ring no. 3, model form without cone

Stand for model form no. 3 without cone.

Package:

  • 1 piece.

...

Show more ...

Product Code:: 9646
Base Former set [up + down]

300.00zł +vat

369.00zł

Product Code:: 9646
Base Former set [up + down]

300.00zł +vat

369.00zł


Base Former set [up + down]

The HINRICHS base form gives the model a fast, economical and clean working base. After 5 seconds, the base model is ready. Simple operation and high economy (low material consumption) make the stand an important assistant in practice.

Package:

  • complete top and bottom.

...

Show more ...

Product Code:: 9049
Crepe tape (for skeletal dentures) 25m.

143.42zł +vat196.00zł

176.40zł

Product Code:: 9049
Crepe tape (for skeletal dentures) 25m.

143.42zł +vat196.00zł

176.40zł


Crepe tape (for skeletal dentures) 25m.

Crepe tape for embedding skeletons.

Benefits:

  • Due to the grooves on the inner surface of the belt, the surface of the outer wall of the box is significantly enlarged.

  • During heating, thanks to the grooves, more heat is absorbed.

  • The casting mold in cross section is not larger than the replicated model.

  • Savings in investment material and space in the heating furnace.

Package:

  • 25 meters.

...

Show more ...

Product Code:: 5889
Doubling cross

23.58zł +vat

29.00zł

Product Code:: 5889
Doubling cross

23.58zł +vat

29.00zł


Doubling cross

Mounting cross Device for the canless duplication system without a mounting device, practical aid when the duplicate is to be vulcanized under pressure.

Package:

1 piece.

...

Show more ...

Product Code:: 1400
Eco Stone III class gypsum 25 kg yellow

121.14zł +vat

149.00zł

Product Code:: 1400
Eco Stone III class gypsum 25 kg yellow

121.14zł +vat

149.00zł


Eco Stone III class gypsum 25 kg yellow

Gypsum III class Eco Stone 25 kg yellow Hard synthetic plaster, type 3, yellow in high quality, intended for casting works with the technique of partial dentures, skeletal dentures and orthodontic appliances. It meets the requirements of ISO 6873-3. Certificate of Approval No. IL-5629 / MS.

Gypsum grade III Eco Stone provides:

  • obtaining models with high durability,
  • minimum, uniform expansion coefficient,
  • constant level of quality.

Physical properties:

  • Hardening time: approx. 10 minutes.
  • Compressive strength after 1 h: more than 20 N / sq. Mm.
  • Hardness after 24 hours over 80 N / sq mm
  • Linear expansion after 2 hours : less than 0.14%

Mixing ratio:

  • Water 100 g: 30 ml
  • Water: plaster 0.3 ml / g
  • Working temperature approx. 23 degrees. C.

Application method:

...

Show more ...

Product Code:: 15202
EcoPolish medium grain pumice 3 kg

33.33zł +vat

41.00zł

Product Code:: 15202
EcoPolish medium grain pumice 3 kg

33.33zł +vat

41.00zł


EcoPolish medium grain pumice 3 kg

Natural medium-grain pumice.

Benefits:

  • It does not contain quartz.

  • Very good abrasive properties.

Package:

  • 3 kg.

...

Show more ...

Product Code:: 13204
GipEx decanter tablets 10 pcs.

104.88zł +vat

129.00zł

Product Code:: 13204
GipEx decanter tablets 10 pcs.

104.88zł +vat

129.00zł


GipEx decanter tablets 10 pcs.

Preparation for a plaster decanter. It prevents clogging of drain pipes, reduces unpleasant odors and facilitates cleaning of the clarifier.

Package:

  • 10 pcs.

...

Show more ...

Product Code:: 6123
GipEx liquid for dissolving plaster 1L

56.10zł +vat

69.00zł

Product Code:: 6123
GipEx liquid for dissolving plaster 1L

56.10zł +vat

69.00zł


GipEx liquid for dissolving plaster 1L

Product for removing plaster and residual plaque from acrylic, dentures, impression trays, tools etc. Acid-free. It can also be used in ultrasonic cleaners, the solution is ready to use. Do not dilute.

Package:

  • 1 liter

...

Show more ...

Product Code:: 11298
GipEx Tabs Basket for hanging + 2 pcs. tablets - test kit.

27.61zł +vat35.01zł

33.96zł

Product Code:: 11298
GipEx Tabs Basket for hanging + 2 pcs. tablets - test kit.

27.61zł +vat35.01zł

33.96zł


GipEx Tabs Basket for hanging + 2 pcs. tablets - test kit.

Preparation for a plaster decanter. It prevents clogging of drain pipes, reduces unpleasant odors and facilitates cleaning of the clarifier.

Package:

  • 2 tablets + a basket for hanging

...

Show more ...

Product Code:: 2954
Gypsum class II Eco Stone Universal 25kg

47.97zł +vat

59.00zł

Product Code:: 2954
Gypsum class II Eco Stone Universal 25kg

47.97zł +vat

59.00zł


Gypsum class II Eco Stone Universal 25kg

Universal grade II plaster.

Mixing ratio: 50ml / 100g. Working time: 6min. Setting time: 10-12 minutes. Linear expansion after 2 h: 015%.

Packaging: 25 kg

...

Show more ...

Product Code:: 7675
Gypsum II class. Eco Stone Universal 5kg

14.63zł +vat

17.99zł

Product Code:: 7675
Gypsum II class. Eco Stone Universal 5kg

14.63zł +vat

17.99zł


Gypsum II class. Eco Stone Universal 5kg

Universal grade II plaster.

Technical data : Mixing ratio: 50ml / 100g. Working time: 6min. Setting time: 10-12 minutes. Linear expansion after 2h: 0.15%.

Packaging 5 kg.

...

Show more ...

Product Code:: 526
Gypsum III class Eco Stone 25 kg blue

121.14zł +vat

149.00zł

Product Code:: 526
Gypsum III class Eco Stone 25 kg blue

121.14zł +vat

149.00zł


Gypsum III class Eco Stone 25 kg blue

Gypsum III class Eco Stone 25 kg blue.

Blue type 3 hard synthetic plaster of high quality, intended for casting works with the technique of partial dentures, skeletal dentures and orthodontic appliances. Meets the requirements of ISO 6873-3.

Eco Stone III class provides:

  • obtaining models with high durability,
  • minimum, uniform expansion coefficient,
  • constant level of quality.

Physical properties:

  • Hardening time: approx. 10-12 minutes.
  • Compressive strength after 1 h: more than 20 N / sq. Mm.
  • Hardness after 24 hours over 80 N / sq mm
  • Linear expansion after 2 hours : less than 0.14%

Mixing ratio:

  • GILUDUR: water 100 g: 30 ml
  • Water: plaster 0.3 ml / g
  • Working temperature approx. 23 degrees. C.

Application method:

Product Code:: 6548
Gypsum III class Eco Stone 5 kg blue

28.46zł +vat

35.01zł

Product Code:: 6548
Gypsum III class Eco Stone 5 kg blue

28.46zł +vat

35.01zł


Gypsum III class Eco Stone 5 kg blue

Eco Stone Blue color Hard synthetic plaster, type 3, of high quality, intended for casting works with the technique of partial dentures, skeletal dentures and orthodontic appliances. Meets the requirements of ISO 6873-3. Certificate of Approval No. IL-5629 / MS.

Eco Stone provides:

  • obtaining models with high durability,
  • minimum, uniform expansion coefficient,
  • constant level of quality.

Physical properties :

Hardening time: approx. 10-12 minutes. Compressive strength after 1 h: over 20 N / mm kw. Hardness after 24 h over 80 N / mm kw. Linear expansion after 2 h. : less than 0.14%

Application method:

Mixing ratio

Eco Stone: water 100 g: 30 ml Water: gypsum 0.3 ml / g Working temperature approx. 23 degrees. C Quickly in no more than 10 sec. pour gypsum to water in the above-mentioned proportions and wait 20 seconds. until the water is absorbed by th

...

Show more ...

Product Code:: 9416
Gypsum IV class Eco Stone Ortho 5kg Premium super white

61.79zł +vat

76.00zł

Product Code:: 9416
Gypsum IV class Eco Stone Ortho 5kg Premium super white

61.79zł +vat

76.00zł


Gypsum IV class Eco Stone Ortho 5kg Premium super white

Characteristic:

Gypsum IV class Eco Stone Ortho 5kg Premium super white enriched with synthetic material.

It is very well suited for diagnostic, demonstration, orthodontic and porcelain models.

Parameters:

  • Hand mixing time - 60 sec.
  • Time of mixing in the mixer - 30 sec.
  • Setting time - 10-12 minutes
  • 2h expansion - 0.14%
  • Water to plaster ratio 26-27 ml: 100 g

Package:

25 kg

...

Show more ...

Product Code:: 527
Gypsum IV class. Eco Stone Ortho 25kg Premium super white

283.74zł +vat

349.00zł

Product Code:: 527
Gypsum IV class. Eco Stone Ortho 25kg Premium super white

283.74zł +vat

349.00zł


Gypsum IV class. Eco Stone Ortho 25kg Premium super white

Characteristic:

Gypsum IV class. Eco Stone Ortho 25kg Premium super white enriched with synthetic material.

It is very well suited for diagnostic, demonstration, orthodontic and porcelain models.

Parameters:

  • Hand mixing time - 60 sec.
  • Time of mixing in the mixer - 30 sec.
  • Setting time - 10-12min
  • 2h expansion - 0.14%

Package:

25 kg.

...

Show more ...

Product Code:: 8912
Gypsum IV, class Hiristone Saphir Gray 5 kg

80.49zł +vat

99.00zł

Product Code:: 8912
Gypsum IV, class Hiristone Saphir Gray 5 kg

80.49zł +vat

99.00zł


Gypsum IV, class Hiristone Saphir Gray 5 kg

Gip IV class Hiristone Saphir Gray.

Extremely durable, hard plaster with a "snap-set" effect that allows you to remove the post (stump) and work on it after 30 minutes.

Characteristic:

  • Creamy, but very flowing texture
  • High index of trixotropy
  • Low expansion
  • Excellent properties for CAD / CAM scanning
  • Homogeneous structure free from delamination

Technical data:

  • Water to plaster ratio: 20: 100
  • Working time 6-7 minutes
  • Setting time 12-14 minutes
  • Binding expansion 0.08% after 2h
  • Compressive strength, dry 90 MPa
  • Color golden brown

Package:

5 kg.

...

Show more ...

Product Code:: 13117
Gypsum IV, class Hiristone Saphir Ivory 5 kg

80.49zł +vat

99.00zł

Product Code:: 13117
Gypsum IV, class Hiristone Saphir Ivory 5 kg

80.49zł +vat

99.00zł


Gypsum IV, class Hiristone Saphir Ivory 5 kg

Gip IV class Hiristone Saphir Ivory.

Extremely durable, hard plaster with a "snap-set" effect that allows you to remove the post (stump) and work on it after 30 minutes.

Characteristic:

  • Creamy, but very flowing texture
  • High index of trixotropy
  • Low expansion
  • Excellent properties for CAD / CAM scanning
  • Homogeneous structure free from delamination

Technical data:

  • Water to plaster ratio: 20: 100
  • Working time 6-7 minutes
  • Setting time 12-14 minutes
  • Binding expansion 0.08% after 2h
  • Compressive strength, dry 90 MPa
  • Color golden brown

Package:

5 kg.

...

Show more ...

Product Code:: 11147
Gypsum, class IV, Hinristone Saphir Golden Brown 5 kg

80.49zł +vat

99.00zł

Product Code:: 11147
Gypsum, class IV, Hinristone Saphir Golden Brown 5 kg

80.49zł +vat

99.00zł


Gypsum, class IV, Hinristone Saphir Golden Brown 5 kg

Gip IV class Hiristone Saphir Golden Brown.

Extremely durable, hard plaster with a "snap-set" effect that allows you to remove the post (stump) and work on it after 30 minutes.

Characteristic:

  • Creamy, but very flowing texture
  • High index of trixotropy
  • Low expansion
  • Excellent properties for CAD / CAM scanning
  • Homogeneous structure free from delamination

Technical data:

  • Water to plaster ratio: 20: 100
  • Working time 6-7 minutes
  • Setting time 12-14 minutes
  • Binding expansion 0.08% after 2h
  • Compressive strength, dry 90 MPa
  • Color golden brown

Package:

5 kg.

...

Show more ...

Product Code:: 13118
Gypsum, class IV, Hinristone Saphir Maize Yellow 5 kg

80.49zł +vat

99.00zł

Product Code:: 13118
Gypsum, class IV, Hinristone Saphir Maize Yellow 5 kg

80.49zł +vat

99.00zł


Gypsum, class IV, Hinristone Saphir Maize Yellow 5 kg

Gip IV class Hiristone Saphir Maize Yellow.

Extremely durable, hard plaster with a "snap-set" effect that allows you to remove the post (stump) and work on it after 30 minutes.

Characteristic:

  • Creamy, but very flowing texture
  • High index of trixotropy
  • Low expansion
  • Excellent properties for CAD / CAM scanning
  • Homogeneous structure free from delamination

Technical data:

  • Water to plaster ratio: 20: 100
  • Working time 6-7 minutes
  • Setting time 12-14 minutes
  • Binding expansion 0.08% after 2h
  • Compressive strength, dry 90 MPa
  • Color golden brown

Package:

5 kg.

...

Show more ...

Product Code:: 2782
Gypsum, III class Eco Stone 5 kg. yellow

28.46zł +vat

35.01zł

Product Code:: 2782
Gypsum, III class Eco Stone 5 kg. yellow

28.46zł +vat

35.01zł


Gypsum, III class Eco Stone 5 kg. yellow

Gypsum, III class Eco Stone 5 kg. yellow Hard synthetic plaster, type 3, of high quality, intended for casting works with the technique of partial dentures, skeletal dentures and orthodontic appliances. Meets the requirements of ISO 6873-3. Certificate of Approval No. IL-5629 / MS.

Gypsum III class Eco Stone provides:

  • obtaining models with high durability,
  • minimum, uniform expansion coefficient,
  • constant level of quality.

Physical properties :

  • Hardening time: approx. 10 minutes.
  • Compressive strength after 1 h: more than 20 N / sq. Mm.
  • Hardness after 24 hours over 80 N / sq mm
  • Linear expansion after 2 hours : less than 0.14%

Application method:

Mixing ratio

Gypsum 100 g: 30 ml Water: gypsum 0.3 ml / g Working temperature approx. 23 degrees. C Quickly in no more than 10 sec. pour gypsum to water in the above

...

Show more ...

Product Code:: 14520
Hinrivest RP liquid for investment material 3D 1L Promotion

47.97zł +vat

59.00zł

Product Code:: 14520
Hinrivest RP liquid for investment material 3D 1L Promotion

47.97zł +vat

59.00zł


Hinrivest RP liquid for investment material 3D 1L Promotion

Hinrivest RP liquid for investment material 3D 1L

Package:

1 l

...

Show more ...

Product Code:: 15201
Hinrizit E white gypsum expansion 5 kg

69.11zł +vat

85.01zł

Product Code:: 15201
Hinrizit E white gypsum expansion 5 kg

69.11zł +vat

85.01zł


Hinrizit E white gypsum expansion 5 kg

Hinrizit E is a dental plaster with a special formula and high bond expansion. This special gypsum is used for the production of models and for canning plastic dentures, due to its high bond expansion, it compensates for the contraction of plastics from which the prostheses are made (eg SR Ivocap Injection System, Acetal, Deflex, FJP, Valplast). Hinrizit E can be used with all plastics for the production of dentures.

Application:

  • Technique of producing plastic dentures

Properties:

  • White color

  • Water: gypsum ratio - 25: 100

  • Mixing time in min. - 5-6

  • Hardening time in min. - 10-12

  • Expansion in the bonding process - 0.60

  • Compressive strength after 1 hour. - 30 MPa

  • Dry compression strength - 60 MPa

Package:

  • 5 kg.

...

Show more ...

Product Code:: 5863
Kit for the canless model duplication technique

608.94zł +vat

749.00zł

Product Code:: 5863
Kit for the canless model duplication technique

608.94zł +vat

749.00zł


Kit for the canless model duplication technique

Starter kit for the canless model duplication technique.

Features:

  • Greater profitability of work, lower material costs (up to 60% less silicone consumption).
  • Increase in productivity thanks to shorter work cycles
  • Higher quality and profit compared to the use of gels.
  • Greater accuracy of the investment model due to the elimination of constraints in bond expansion.
  • Easier release of the duplicate model.
  • Precise technique without the need to invest in expensive equipment.

Package:

  • Fixator- fixing device.
  • 3 stabilizing plates.
  • Tape with an adhesive strip 40m.
  • Hinrisil Speed 1kg + 1kg. - silicone for duplicating models.
  • Hinrisol 250 ml - alcohol-based liquid to reduce the tension of silicone surfaces, before pouring the model out of the investment compound.
  • Crepe tape 25 m - for embedding skeletal dentures.

    ...

    Show more ...

Product Code:: 6218
Liquid for impregnating plaster models 4.5 l

161.79zł +vat

199.00zł

Product Code:: 6218
Liquid for impregnating plaster models 4.5 l

161.79zł +vat

199.00zł


Liquid for impregnating plaster models 4.5 l

Product for impregnating and polishing gypsum models. It is perfect for demonstration and orthodontic models.

Directions for use:

Immerse clean and thoroughly dried plaster models in a special solution for 30 minutes.

Remove models, rinse under warm running water. Then dry and polish with a dry, soft cloth. The models treated in this way will have a glossy non-dusting surface.

Package:

4.5 kg

...

Show more ...

Product Code:: 15203
Model System Profident 2010 starter kit

486.99zł +vat

599.00zł

Product Code:: 15203
Model System Profident 2010 starter kit

486.99zł +vat

599.00zł


Model System Profident 2010 starter kit

This innovative, reliable modeling system ensures maximum precision and savings in time and material. There is no need to invest in additional expensive equipment. Profident 2010 can also be used to quickly produce high-quality split models. After the impression is made, the complete model with the base is made in one step. Profident 2010 is equipped with a split-cast with a factory fixed m spacing. The components and base plates are available in two sizes and are reusable.

Package:

  • 3 x base plate size 1
  • 2 x base plate size 2
  • 3 x Gauge Block Size 1
  • 2 x gauge block size 2
  • 2 x model sleeve size 1
  • 1 x model sleeve size 2
  • 1 x Removal Device
  • 1 x 100 ml Profisep 2010;
  • 1 x size 1 positioning plate
  • 1 x positioner plate, size 2

...

Show more ...

Product Code:: 12360
Ring socket no.9 round form with a cone

20.33zł +vat

25.01zł

Product Code:: 12360
Ring socket no.9 round form with a cone

20.33zł +vat

25.01zł


Ring socket no.9 round form with a cone

Support for ring no. 6, round form with a cone.

Package:

  • 1 piece.

...

Show more ...

Product Code:: 8964
Ring support no. 2 model form with a cone

20.33zł +vat

25.01zł

Product Code:: 8964
Ring support no. 2 model form with a cone

20.33zł +vat

25.01zł


Ring support no. 2 model form with a cone

Stand for model form no. 2 with a cone

Package:

  • 1 piece.

...

Show more ...

Product Code:: 4769
Silicon ring No. 6 blue

70.19zł +vat89.00zł

86.33zł

Product Code:: 4769
Silicon ring No. 6 blue

70.19zł +vat89.00zł

86.33zł


Silicon ring No. 6 blue

Attention:

  • You can order the stand for the ring under the number 12561

Round silicone ring without base, for economical and direct protection, used in the fabrication of crowns and bridges.

Inner Diameter:

  • 62 mm

Advantages:

  • Increased surface thanks to longitudinal grooves on the inner surface.
  • It does not hinder the expansion of the bond, which allows for an optimal adjustment of the casting.
  • The silicone ring ensures a more even heat absorption and controls the cooling of the ring.

Package:

  • Ring No. 6 without a stand.

...

Show more ...

Product Code:: 8489
Silicone ring model form No. 2

72.36zł +vat

89.00zł

Product Code:: 8489
Silicone ring model form No. 2

72.36zł +vat

89.00zł


Silicone ring model form No. 2

Silicone ring, model mold. The base for the ring is under the number 8964 - with a cone, 15185 - without a cone

Designed for direct and economic investment in conjunction with the ring base of a model mold. Can also be used in the crown and bridge technique

Advantages:

  • Diameter 80 x 65 mm.

  • Increased surface due to longitudinal grooves on the inner surface.

  • It does not hinder the expansion of the bond, which allows for an optimal adjustment of the casting.

  • The silicone ring ensures more even heat absorption and controlled cooling of the joint.

  • The distance of the model from the wall of the sleeve can be equal in any place, which enables a better fit.

Package:

  • Ring without a stand.

...

Show more ...

Product Code:: 9319
Silicone ring model form no. 3

80.49zł +vat

99.00zł

Product Code:: 9319
Silicone ring model form no. 3

80.49zł +vat

99.00zł


Silicone ring model form no. 3

Silicone ring, model mold. The base for the ring is under the number 9153 - with a cone, 15186 without a cone.

Designed for direct and economic investment in conjunction with the ring base of a model mold. Can also be used in the crown and bridge technique

Advantages:

  • Diameter 90 x 75 mm.

  • Increased surface due to longitudinal grooves on the inner surface.

  • It does not hinder the expansion of the bond, which allows for an optimal adjustment of the casting.

  • The silicone ring ensures more even heat absorption and controlled cooling of the joint.

  • The distance of the model from the wall of the sleeve can be equal in any place, which enables a better fit.

Package:

  • Ring without a stand.

...

Show more ...

Product Code:: 13269
Silicone ring No. 3 blue

62.30zł +vat79.00zł

76.63zł

Product Code:: 13269
Silicone ring No. 3 blue

62.30zł +vat79.00zł

76.63zł


Silicone ring No. 3 blue

Attention:

  • You can order the stand for the ring under the number 5137

Round silicone ring without base, for economical and direct protection, used in the fabrication of crowns and bridges.

Inner Diameter:

  • 45 mm

Advantages:

  • Increased surface thanks to longitudinal grooves on the inner surface.
  • It does not hinder the expansion of the bond, which allows for an optimal adjustment of the casting.
  • The silicone ring ensures a more even heat absorption and controls the cooling of the ring.

Package:

  • Ring No. 3 without a stand.

...

Show more ...

Product Code:: 9152
Silicone ring No. 9 blue

80.49zł +vat

99.00zł

Product Code:: 9152
Silicone ring No. 9 blue

80.49zł +vat

99.00zł


Silicone ring No. 9 blue

Attention:

  • You can order the stand for the ring under the number 12360

Round silicone ring, without a base for economic and direct protection, used in the fabrication of crowns and bridges.

Inner Diameter:

  • 75mm

Advantages:

  • Increased surface thanks to longitudinal grooves on the inner surface.
  • It does not hinder the expansion of the bond, which allows for an optimal adjustment of the casting.
  • The silicone ring ensures a more even heat absorption and controls the cooling of the ring.

Package:

  • Ring No. 9 without a stand.

...

Show more ...

Product Code:: 15185
Support for ring no. 2, model form without cone

20.33zł +vat

25.01zł

Product Code:: 15185
Support for ring no. 2, model form without cone

20.33zł +vat

25.01zł


Support for ring no. 2, model form without cone

Stand for model form no. 2 without a cone.

Package:

  • 1 piece.

...

Show more ...

Product Code:: 5137
Support for ring No. 3, round form with a cone

20.33zł +vat

25.01zł

Product Code:: 5137
Support for ring No. 3, round form with a cone

20.33zł +vat

25.01zł


Support for ring No. 3, round form with a cone

Support for ring no. 3, round form with a cone.

Package:

  • 1 piece

...

Show more ...

Product Code:: 12561
Support for ring no. 6, round form with cone

20.33zł +vat

25.01zł

Product Code:: 12561
Support for ring no. 6, round form with cone

20.33zł +vat

25.01zł


Support for ring no. 6, round form with cone

Support for ring no. 6, round form with a cone.

Package:

-1 piece.

...

Show more ...

Product Code:: 9153
Support for the ring no. 3 model form with a cone

20.33zł +vat

25.01zł

Product Code:: 9153
Support for the ring no. 3 model form with a cone

20.33zł +vat

25.01zł


Support for the ring no. 3 model form with a cone

Stand for model form no. 3 with a cone.

Package:

  • 1 piece.

...

Show more ...

Product Code:: 5526
Transparent tape for Siladent cuvettes (40 m)

144.44zł +vat189.00zł

177.66zł

Product Code:: 5526
Transparent tape for Siladent cuvettes (40 m)

144.44zł +vat189.00zł

177.66zł


Transparent tape for Siladent cuvettes (40 m)

Adhesive tape for duplicating models.

Benefits:

  • It has thicker adhesive strips that guarantee a greater distance between the model and the duplicating silicone.

Package:

1 pc / 40 m

...

Show more ...

Product Code:: 9908
Wax adhesive 30 ml

28.46zł +vat

35.01zł

Product Code:: 9908
Wax adhesive 30 ml

28.46zł +vat

35.01zł


Wax adhesive 30 ml

Wax adhesive - an adhesive for sticking wax elements. Leaves no traces.

Packaging: - 30ml.

...

Show more ...

Showing 1 to 38 of 38 (1 Pages)