Plaster mixing spatula, metal.

Packaging:

• 1 piece.

Wax modeling knife.

Package:

1 piece.

Upcera Glaze Paste Realism is a universal range of materials for characterization and glazing, such as ceramics, lithium disilicate, zirconium oxide.

After characterization and glazing with Realism, the restorations are very real and natural.

Packaging:

• 1pc/5g

Arti-Fol Metallic 12µ is a new High Tech inspection film with significantly improved properties. This new control film is a metallised polyester film (Shimstock film) with a thin thickness of 12u. The new film is characterized by very good dye transfer. Thanks to the metallised reverse side of the foil, the side with the dye layer is easy to distinguish. Arti-Fol Metallic, due to its high tensile strength and low material thickness, is ideal for controlling proximal contact points when placing bridges or crowns.

Characteristics:

• On porcelain and polished metal surfaces, the contact points are clear.
• Metallization largely eliminates the problem of static electricity.
• Easy application without tweezers.
• Very tear resistant.
• Width 22mm.
• Length 20m.
• Red, one-sided.

Packaging:

• 1 piece.

Haftkleber glue thinner.

Packaging:

• 25 ml

Diamond disc (full diamond) for contouring CoCr alloys.

Characteristics:

• Operating range 5-15000 rpm.
• Diameter 8 mm
• Thickness 0.40mm
• Mounted and centered.

Packaging:

• 1 piece

Fixing ring for tips for impression material.

Package:

• 1 piece

Green milling wax. This high-quality, medium-hard wax is used for modeling in the technique of making crowns and bridges.

Characteristics:

• This wax can be milled well.
• It does not smudge and retains its shape very well.
• It is the perfect wax for all types of combined work.

Packaging:

• 70g.

Reinforced disc for a polisher-grinder.

Characteristics:

• Reinforced on both sides with fiberglass mesh.
• For cutting casting channels.
• Diameter 125x1.0mm

Packaging:

• 1 piece.

Armored shields with a handle.

Benefits:

• Reinforced on both sides with a high-performance and durable fiberglass mesh.
• For cutting steel and precious alloys.
• It does not heat the processed material.
• max. speed 38,000 rpm.

Characteristics:

• White color, thickness 40x0.4mm
• yellow color, thickness 40x05 mm,
• green color, thickness 40x0.7 mm,
• blue color, thickness 40x1.0 mm,
• Red color, thickness 40x1.0 mm with reinforcement.

Package:

1 piece.

Round wax profiles 1.35 mm.

Packaging:

• 1pack/50g.

Mdel-tray clamp with lock for molds for split models. 2 sizes.

Package:

1 set.

Model-tray mold holder for split models.

Package:

1 piece.

GEO Avantgarde Universal opaque wax - mint.

Medium-hard, inorganic modeling wax for conventional crown and bridge techniques. Optimized for modeling with an electric wax knife.

Renfert catalog number 4950300

Characteristics:

• For crown modeling.
• It allows for optimal operation at low temperatures and cools down very quickly.
• It achieves high modeling precision.

Packaging:

• 1pc/75g

• The new line of 4Shine Polishing Powder products

Everall7 is pleased to present a new line of auxiliary products for the pre-polishing of 4Shine Polishing Powder acrylic and thermoplastics. Thanks to the support of Polish dental technicians, we have created two variants of abrasion: regular - medium abrasive and hard - highly abrasive. Our polishing powder is perfect for pre-polishing and shining of all acrylic and thermoplastic materials.

The varied size and sharp contour of the grains allows easier and faster polishing to a high gloss without the need to use silicone rubbers. Thanks to the use of a preservative, it prevents the multiplication of bacteria and fungi during use to ensure greater comfort of work.

Package:

• 10 kg

Flexible silicone polishing erasers.

Intended for processing:

• Porcelain.
• Precious alloys.
• Acrylic.

Characteristics:

• Blue, fine-grained eraser.
• Mirror polishing.
• Speed - 7,000- 10,000 rpm.
• Size 22x3mm

Packaging:

• 1 piece.

IPS d.SIGN Deep Dentin AD is a material used to increase the color intensity in layers that can be applied in a limited thickness.

Characteristics:

• There is no color change in relation to the color of the base dentine.
• Increased color quality and intensity.
• It comes in 16 colors A-D.

Packaging:

20g.

Lustrol - varnish sealing the denture relining after mechanical treatment.

Description:

• For sealing and smoothing soft silicone-based relines such as Mollosil plus and Molloplast B.
• Neutral taste and smell, biocompatible.
• Mixing ratio 1:1.
• To be applied with a brush (thin layer).
• Class IIa medical device.

Packaging:

• 6 ml varnish
• 6 ml catalyst

Textile brush 60mm.

Package:

• 1 piece.

GEO Classic transparent wax - mint.

Hard, organic wax with very good modeling and sculpting properties and very low shrinkage. No residue after firing.

Renfert catalog number 4971300

Characteristics:

• Wax intended for pressed ceramics.
• Contains a small amount of pigment.
• Burns 100% without residue.
• Low shrinkage thanks to microcrystalline structure.

Packaging:

• 1pc/75g.

Geo Classic mint opaque wax 75g

Hard, inorganic wax with very good modeling and sculpting properties and very low shrinkage. Suitable for conventional casting techniques.

Renfer catalog number 4970300

Characteristics:

• For modeling with Bunsen burners with very good tolerance to temperature fluctuations.
• It gives good results in modeling both crowns and bridges of various widths.
• All wax components burn completely.

Packaging:

• 1 pack/75 g.

Plastic, disposable.

Packaging:

• 1 piece.

IPS Ceramic Etching Gel is an etching agent designed to create an adhesive retention surface for ceramic materials deposited with composite materials. It increases the bonding strength of the composite material (cement) with the ceramic surface.

ATTENTION ! The material must not be used directly in the mouth.

Packaging:

• Gel 5 ml

Upcera Glaze Paste Realism is a universal range of materials for characterization and glazing, such as ceramics, lithium disilicate, zirconium oxide.

After characterization and glazing with Realism, the restorations are very real and natural.

Packaging:

• 1pc/15ml

Plaster bowl No. 4.

Dimensions:

• diameter 17 cm
• height 16 cm

Package:

1 piece.

GEO DIP green wax for the soaking technique.

• Soft, ready-to-use dip wax with minimal shrinkage for use in all crown and bridge techniques.

Renfert catalog number 4823300

Characteristics:

• Low copy shrinkage.
• For use in electronically stabilized melting vessels.
• The practical form of granules makes it easier to fill the melting vessel.
• Recommended temperature setting is 90 - 92 °C
• Repeatable, precisely fitting wax copies with uniform layer thickness.
• This thickness depends on the temperature.
• Great stability and flexibility.
• Does not contain acrylic additives.

Packaging:

• 1pc/200g

Highly abrasive stone which, thanks to its porous structure, does not heat up the thermoplastic material during processing, reducing the risk of material deformation. Use the stone for pre-treatment - collecting material. (use 3000-5000 rpm optimally / max 20,000 rpm)

Package :

1 piece.

Orange chamois soaked in pumice.

Use an orange chamois leather to smooth the surface and prepare it for gloss polishing of acrylic, acetal, nylon and all thermoplastics. Deerskin is already soaked in pumice - do not use additional pastes and preparations. (use 5,000-7,000 rpm optimally / 10,000 rpm maximum)

For the best effect, use an orange chamois and then a pink chamois - kod_mikran: 2243

package:

1 piece 22 mm / 3mm

Description:

• Modeling wax for work in technical and dental laboratories and dental offices, including: for making short-circuit billets and patterns.

• Pink color

• Hard

Advantages:

• Optimum hardness

• Slight thermal shrinkage

• Unbreakable and flexible

• High resistance to cracking

• Shape stability, so it does not soften and distort at body temperature (important when "trying on" a wax denture with aligned teeth in the patient's mouth)

Packaging:

• 500g

Characteristic:

Pink chamois soaked in pumice.

After using an orange chamois, use a pink chamois for a high gloss finish for acrylic, acetal, nylon and other thermoplastics. Deerskin is already soaked in pumice - do not use additional pastes and preparations. (use 5,000-7,000 rpm optimally / 10,000 rpm maximum)

For best results, use an orange chamois and then a pink chamois.

Package:

1 piece 22 mm / 3mm

Cotton brush "lamb".

Characteristics:

• Very delicate.
• Diameter 70mm.
• For the polisher.

Packaging:

• 1 piece.

Hartebad - a self-curing preparation for covering the surface of plaster models. A single (single-layer) application of the preparation to the plaster surface hardens it and makes it water-resistant. Hartebad does not create a film layer on the hardened surface and does not leave any deposits.

Renfert catalog number 17192000

Characteristics:

• Thanks to the properties of the Hartebad preparation, it is used to seal the edges of crowns and inlays and onlays marked on the plaster model (e.g. with a pencil).
• Excellent effects are achieved by using the preparation when modeling the cervical layer.
• Apply a single, thin layer using a small brush, e.g. size 1 to 4.

Packaging:

• 125 ml can.

EVE Diasynt Plus / Diapro

A three-stage set of rubbers and stones for the processing of lithium disilicate

Kit composition:

• DIASYNT PLUS stones - pretreatment,
• DIAPRO brown rubbers - smoothing and pre-polishing,
• DIAPRO lime rubbers - high gloss polishing.

Recommended for polishing restorations made of IPS e.max press and other restorations made of Lithium Disilicate, e.g. AMBER Mill

Package:

• stones - 3 pcs
• medium brown erasers - 3 pcs
• fine lime rubber bands - 3 pcs

White material for duplicating agar-based models. Very precise - its consistency resembles silicone.

Features:

• White color
• extremely durable material
• very smooth casting surfaces - qualitatively comparable to the effects of silicone
• tear resistance
• reusable mass

Instruction:

• When using for the first time, do not add water.
• The melting point should not exceed 90/92 degrees C, higher melting point may damage the mass.
• Stir until the mass is completely liquid, otherwise it will be lumpy.
• Before doubling, irrigate the model in lukewarm water for 15 to 30 minutes.
• Working temperature 45 to 50 degrees C
• Setting time minimum 60 minutes
• If cold water is used to cool the agar to accelerate setting, allow the mold to warm to room temperature before pouring in the investment material.
• Add 50 to 100 ml of water for re-use.

When melting the mass in a microwave:

• Cut the agar into small pieces, add water and stir, then pour off the water.
• Put the prepared mass into the microwave in a non-metallic container.
• Switch the device on for 60 seconds at full power.
• Remove and stir for about 30 seconds.
• Repeat points 3 and 4 2 or 3 times until the weight is approximately 84 degrees C.
• Pouring the prepared model with agar.

Package:

• 6kg

Biosil F is a flexible chrome-cobalt prosthetic alloy for casting frame dentures. Thanks to its exceptional elasticity, it is recommended for skeletal work with long arms of retention clasps.

Characteristics:

• Composition: Co - 64.8%, Cr - 28.5%, Mo - 5.3%, Si - 0.5%, Mn - 0.5%, C - 0.4%.
• Melting point: 1320- 1380°C.
• Pouring temperature: 1500 °C.
• Mold heating temperature: 1000 °C.
• Vickers hardness: 400 HV 10.
• Tensile strength: 900 N/mm².
• Destruction limit: 5%.
• Density: 8.4 g/cm³
• Yield strength: 700 N/mm².
• Modulus of elasticity: 220 GPa.

Packaging:

• 1 piece.

Brass brush, diameter 21mm.

Packaging:

• 1 piece.

Moloplast B denture relining material, one-component silicone.

Characteristics:

• Easy to use, thermally cured.
• Permanently elastic.
• Can be polymerized simultaneously with acrylic.
• Adheres well to all types of prosthetic acrylics, both new and used.
• Long-term resistance to oral conditions.
• No taste or smell.
• It can be used for relining, filling damaged dentures and correcting the shape.
• Class IIa medical device.

Packaging:

• 1pc /45g.

Diamond polishing paste specially for polishing hybrid materials to a high gloss, for use outside the mouth. Optimum polishing effect thanks to diamond particles in the polishing paste, which are specially selected for hybrid materials. Reduced plaque build-up and longer life of restorations thanks to an optimal surface finish.

Package:

• 13g

ADERER prosthetic forceps, so-called three-jaw. For forming staples and wire. Made of high quality stainless steel.

• Length 120mm
• For wire max.0.3mm

Packaging:

• 1 piece.

Schwarz forceps. Concave - convex. Made of the highest quality stainless steel.

• Length 140mm.
• For wire max.0.7mm.
• The diameter of the working part is 1.2 mm.

Packaging:

• 1 piece.

McKELLOPS prosthetic forceps. Concave-convex. For forming staples and wire. Made of the highest quality stainless steel.

• Length 160mm.
• For wire max. 1.0mm
• Diameter of the working part 3mm.

Packaging:

• 1 piece.

Adams clip and wire forming pliers. Made of the highest quality stainless steel.

• Length 125mm.
• For wire max 0.7 mm.
• The diameter of the working part is 1.2 mm

Packaging:

• 1 piece.

One of the most universal materials for use by a dental technician.

Viva Flex Partials Gingiva is a perfectly composed material for any type of partial denture, guaranteeing the right balance between flexibility and stiffness. Extremely easy to process, polish to a high gloss and resistant to discoloration. Working with the Viva FLex Partials Gingiva material does not require expansion plaster.

Application:

• Partial dentures with pelottes,
• Complete dentures,
• Clips and space maintainers,
• Aesthetic clasps for skeletal dentures,

Viva Flex Partials GINGIVA material is characterized by no veins and low translucency

Characteristics:

• Very low shrinkage 0.65%
• Low fluid absorption - 0.3%
• Injection on 3rd class plaster,
• No residual monomer
• Easy to process and polish
• Easy to repair, (post-injection)
• Increased resistance to damage,
• Lightly veined

Available packaging:

• XL - 23 grams
• Cartridges with a diameter of 22 mm and 25 mm

Advantages:

• Aesthetics - the smooth and mirror surface of the denture reduces fluid absorption and plaque deposition, as well as the absence of discoloration and unpleasant odor.
• Comfort - high-quality material guarantees a perfect fit of the denture in the oral cavity.
• Functionality - perfect balance between stiffness and flexibility

Packaging:

• 1 piece.

Flannel brush, very delicate. Diameter 100mm.

Package:

1 piece.

One of the most universal materials for use by a dental technician.

Viva Flex Partials LF is a perfectly composed material for any type of partial denture, guaranteeing the right balance between flexibility and stiffness. Extremely easy to process, polish to a high gloss and resistant to discoloration. Working with Viva FLex Partials LF does not require expansion plaster.

Application:

• Partial dentures with pelottes,
• Complete dentures,
• Clips and space maintainers,
• Aesthetic clasps for skeletal dentures,

Viva Flex Partials GINGIVA is characterized by no veins and low translucency

Characteristics:

• Very low shrinkage 0.65%
• Low fluid absorption - 0.3%
• Injection on 3rd class plaster,
• No residual monomer
• Easy to process and polish
• Easy to repair, (post-injection)
• Increased resistance to damage,
• Lightly veined

Available packaging:

• XL - 23 grams
• Cartridges with a diameter of 22 mm and 25 mm

Advantages:

• Aesthetics - the smooth and mirror surface of the denture reduces fluid absorption and plaque deposition, as well as the absence of discoloration and unpleasant odor.
• Comfort - high-quality material guarantees a perfect fit of the denture in the oral cavity.
• Functionality - perfect balance between stiffness and flexibility

Packaging:

• 1 piece

Kerox HT zircon, size 95x18mm, color A1

Product sale:

Packaging:

• 1 piece

Dental occlusal wax, ideal for rational, aesthetic modeling of chewing surfaces.

Characteristics:

• It can be applied very well.
• Clear contours.
• Occlusive waxes do not discolor or stick.
• They burn without residue.

Packaging:

• 70g.

Detailed information:

• Make an appointment for a free presentation in your studio/office:
• Dental tech. Damian Dunajewski Consultant/CAD/CAM Specialist Tel.600 128 010 damian.dunajewski@mikran.com
• Dental tech. Kamil Wolniewicz Consultant/CAD/CAM Specialist Tel.530 596 166 kamil.wolniewicz@mikran.com

Advantages:

• Full arc scan - 12 sec.
• Accuracy 8 microns.
• Very good scanning of models with hard-to-reach places.
• Orthodontic models.
• Undivided models.
• True color texture scanning in color.
• Wide range of applications (veneers, implants, unsplit models, split models, impressions.
• Scanning the model in true color.
• Impression scanning.
• Scanning unsplit models.

Functions:

• All-in-one scanning
• One-click triple tray scanning.
• Impression scanning.

Technical data:

• Model size 355×268×384（mm)
• Weight 9.5 kg
• 2x1.3mp cameras.
• Accuracy 8 microns.
• Blue light projector, multi-color scanning.
• USB 3.0 interface
• Output format STL；UM；PLY；OBJ
• Power supply AC110-240V (50HZ)
• 12-month warranty.

The price of the scanner includes UPSCAN scanning software, does not include design software

The scanner works with design programs:

• UPCAD

• EXOCAD

Packaging:

• 1 piece

Tips for silicone impression materials.

• Yellow.

Packaging:

• 1 pc or 48 pcs

Type A silicone material designed to imitate the gingiva on the model. The preparation is administered from a gun.

• Gingifast Elastic - elastic designed to imitate gums when making bridges.

Packaging:

• 2 x 50 ml + 10 ml separator
• 12 mixing tips
• 12 Oral Tips